Thrusmaster Warthog TDC Issue

[KSA Death Force]

I can't bind my TDC knob on my Thrustmaster Warthog throttle to the TDC functions in the game with the exception of the push function, that registers instantly, but when I move it left, right, up or down nothing happens. It works fine when I'm flying the A-10 so I don't think the issue is with the Thrustmaster. Has anyone faced this issue? Solutions? 

[unltd]

The TDC knob is an axis controller, not a button push.  Program it just like you program the stick. throttle, and rudder.  

[KSA Death Force]

Thanks, I did but nothing happens. It doesn’t register the axis movements. 

[lxsapper]

On 7/6/2023 at 11:17 PM, KSA Death Force said:

Thanks, I did but nothing happens. It doesn’t register the axis movements. 

Can you map it in other modules? Have you checked the Axis through windows Game Devices?

[rob10]

Try RIGHT clicking in the box you want to bind it to and manually selecting the appropriate TDC direction.

[unltd]

Also, check through your axis settings and clear all the view controls assigned to various axi if you are using VR or Track IR.

[GrEaSeLiTeNiN]

I tried the before-upgrade stock slew on the warthog throttle and adjusted the axes curves for TDC but it was basically useless.  

[Wood]

On 7/19/2023 at 9:25 AM, GrEaSeLiTeNiN said:

I tried the before-upgrade stock slew on the warthog throttle and adjusted the axes curves for TDC but it was basically useless.  

So did you get this fixed because as you said. It simply does not register as an axis on the throttle controller and has to be manually added as an axis.
 

Thanks in advance. 
 

Wood 

Edited November 9, 2023 by Wood

[GrEaSeLiTeNiN]

8 hours ago, Wood said:

So did you get this fixed because as you said. It simply does not register as an axis on the throttle controller and has to be manually added as an axis.
Thanks in advance. 
Wood 

It does register as an axes but no amount of tuning has made it usable for radar cursor slewing. I did not go with the slew mod. I simply unassigned the axes in the slew and use only the depress button part as modifier in all my modules. The latest Warthog hotas has a new and much better slew switch much like the modded one.  (With each new module, you have to check all hotas axes as they may be improperly assigned or not assigned by default.)

[Icecap]

I mapped mine to TDC Slew Horizontal and TDC Slew Vertical, The following values worked well for me:-

Horizontal

Deadzone     25

Saturation X  100

Saturation Y   62

Curvature         21

Vertical

Deadzone     21

Saturation X  100

Saturation Y   68

Curvature         25