SuperTonique Posted April 16, 2024 Posted April 16, 2024 Hi pilots ! I've noticed that since NVIDIA is coupled with DCS World, all small white information or object on the screen are flickering despite the various screen settings. Have you the same problem ? it's very unpleasant...
silverdevil Posted April 17, 2024 Posted April 17, 2024 14 hours ago, SuperTonique said: Hi pilots ! I've noticed that since NVIDIA is coupled with DCS World, all small white information or object on the screen are flickering despite the various screen settings. Have you the same problem ? it's very unpleasant... hello. i am not experiencing this issue. do you have any suspicions of what the message is or what is creating the message? maybe it is an outside application? that is what it sounds like to me. are you able to capture a video of the anomaly? it will be difficult to reproduce. AKA_SilverDevil Join AKA Wardogs Email Address My YouTube “The MIGS came up, the MIGS were aggressive, we tangled, they lost.” - Robin Olds - An American fighter pilot. He was a triple ace. The only man to ever record a confirmed kill while in glide mode.
Marshallman Posted April 17, 2024 Posted April 17, 2024 Nvidia updates from 16th April. 3XS AMD RyzenTM 7 9800X3D, AM5, Zen 5, 8 Core, 16 Thread, 4.7GHz, 5.2GHz Turbo, ASUS PRIME X870-P WiFi AM5 DDR5 PCIe 5.0 ATX Motherboard,Nvidia Geoforce RTX4090,Corsair Vengeance Grey 64GB 6000MHz AMD EXPO DDR5 Memory Kit,Windows 10 Pro Reverb G2V2
SuperTonique Posted April 17, 2024 Author Posted April 17, 2024 6 hours ago, Marshallman said: Nvidia updates from 16th April. Yes ! I know that and I have yet installed this update... no change ! 1
SuperTonique Posted April 17, 2024 Author Posted April 17, 2024 I've found a screen setting with the "anti-aliasing" option that gives a more or less correct result. I'll try to push the settings a bit further. What I can't understand is why, before a DCS upgrade, all the settings are fine and then, after the upgrade, you have to adjust everything again. If you have any ideas, don't hesitate!
silverdevil Posted April 18, 2024 Posted April 18, 2024 13 hours ago, SuperTonique said: I've found a screen setting with the "anti-aliasing" option that gives a more or less correct result. I'll try to push the settings a bit further. What I can't understand is why, before a DCS upgrade, all the settings are fine and then, after the upgrade, you have to adjust everything again. If you have any ideas, don't hesitate! there have been reports that either or both nvidia and DCS settings get wiped or corrupted after updates. perhaps it is that? AKA_SilverDevil Join AKA Wardogs Email Address My YouTube “The MIGS came up, the MIGS were aggressive, we tangled, they lost.” - Robin Olds - An American fighter pilot. He was a triple ace. The only man to ever record a confirmed kill while in glide mode.
Mr_sukebe Posted April 18, 2024 Posted April 18, 2024 Did you clean out your FXO and Metashader folders? 7800x3d, 5080, 64GB, PCIE5 SSD - Oculus Pro - Moza (AB9), Virpil (Alpha, CM3, CM1 and CM2), WW (TOP and CP), TM (MFDs, Pendular Rudder), Tek Creations (F18 panel), Total Controls (Apache MFD), Jetseat
SuperTonique Posted April 20, 2024 Author Posted April 20, 2024 On 4/18/2024 at 2:50 PM, Mr_sukebe said: Did you clean out your FXO and Metashader folders? Sorry about my non-understanding... but what about "FXO and Metashader floders" ? Where are they positionned ?
hornblower793 Posted April 20, 2024 Posted April 20, 2024 In your saved games folder (C:\Users\<your username>\Saved Games\DCS.openbeta (or DCS). You should have both an fxo and a metashader folder in here. Close DCS, either delete both these folders or go into each and clear out all the files. DCS will then recreate the files it needs when it is running Windows 11 Home ¦ Z790 AORUS Elite AX motherboard ¦ i7-13700K ¦ 64GB Corsair Vengeance DDR5 memory @ 5600MHz ¦ Samsung 990 Pro 1TB SSD for OS, Samsung 980 Pro 2TB SSD for DCS ¦ MSI GeForce RTX 4090 Gaming X Trio 24GB ¦ Virpil WarBRD base with VFX grip, Thrustmaster A10c and F/A-18 grips ¦ VKB Gunfighter Mk4 and MCG Pro ¦ Thrustmaster Warthog Throttle ¦ VKB STECS Throttle ¦ Virpil TCS rotor base with Shark and AH-64D grips ¦ MFG Crosswinds ¦ Total Controls Multi-Function Button Box ¦ Pimax Crystal
Solution SuperTonique Posted April 21, 2024 Author Solution Posted April 21, 2024 22 hours ago, hornblower793 said: In your saved games folder (C:\Users\<your username>\Saved Games\DCS.openbeta (or DCS). You should have both an fxo and a metashader folder in here. Close DCS, either delete both these folders or go into each and clear out all the files. DCS will then recreate the files it needs when it is running Thanks a lot for your answer ! 1
Recommended Posts