Jump to content

FSSB R3 base audio warning - New user question


Recommended Posts

Posted

So, after having this on my wishlist for a very long time, I recently bought a 2nd hand RS FSSB R3 form a community member here. It is in every positive way what I expected! I managed to aerial refuel the Viper "with relative ease" on my first try 😲. Awesome!

 

Just a small "new owner" question. Perhaps it's because my muscle memory needs more training, but I hear the audio warning quite often (especially when making right hand rolls). How "bad" is this?

I mean, do I risk any permanent damage if the audible warning goes off too often and should I try and prevent this at all costs? Or is it merely to let me know I reached the in-/output limit of the base and adding more force is pointless?

  • Like 1

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3

 

~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH

Posted

Hi,

Not sure about that, but I would first check that the settings set in the RS HID Dev tool program are "realistic".

By "realistic" I mean the Roll and Pitch Sensibility and then in the Warning Sound Level.

Look here for some starting settings and then adapt to what suit you best.

Have a look at the base manual attached.

If still lost about this and in doubt, ask here:

https://realsimulator.com/FSSB_R3_Forum/viewforum.php?f=13

FSSB-R3_User_Guide.pdf

Posted
8 hours ago, Swiso said:

Hi,

Not sure about that, but I would first check that the settings set in the RS HID Dev tool program are "realistic".

By "realistic" I mean the Roll and Pitch Sensibility and then in the Warning Sound Level.

Look here for some starting settings and then adapt to what suit you best.

Have a look at the base manual attached.

If still lost about this and in doubt, ask here:

https://realsimulator.com/FSSB_R3_Forum/viewforum.php?f=13

FSSB-R3_User_Guide.pdf 8.63 MB · 0 downloads

Thanks for your reply

I found that forum, but I have no idea where to register. I'm probably blind, but I only see a login button, not a register button 🤷‍♂️

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3

 

~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH

Posted
8 hours ago, sirrah said:

Thanks for your reply

I found that forum, but I have no idea where to register. I'm probably blind, but I only see a login button, not a register button 🤷‍♂️

I think you have to notify Realsimulator that you have bought one of their bases and they will create an account for you.

Register here and then tell them that you bought second hand one of their bases, give them the serial #.

 

Posted
7 minutes ago, Swiso said:

I think you have to notify Realsimulator that you have bought one of their bases and they will create an account for you.

Register here and then tell them that you bought second hand one of their bases, give them the serial #.

 

Thanks

Already in mail contact with RS about it 🙂 (Apparently it's a client only forum)

  • Like 1

System specs:

 

i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU

HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3

 

~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH

  • 2 months later...
Posted
2024/9/13 PM10点07分,sirrah说:

do I risk any permanent damage

Yes,I met this situation, the sensor plate was fatigued

DO NOT CLOSE THE "warning"

9900K | 4090 | 32Gb | Quest 3 | VD Link | RS FSSB R3L MKII"ULTRA" + RS F16 Side Grips GRH V2 | Winwing Orion Throttle Base II + TGRIP F16 | TM TPR | Winwing ICP | DIY AH-64 KU | Buick GL8 Seat | USB Cigarette Lighter | Cambridge Audio DACMagic 200M | Aura AST-2B-04 | Genelec 8010A

Posted (edited)

It really depends how you have the base configured. If you're running max force with red warning at 100% then you don't want to be regularly exceeding it. 

If you're running 50% force then hitting the red isn't going to hurt it at all.

If have mine configured with slightly reduced force, green at 95%, red at 100% - unless I hit red and keep pulling I'm going to be within envelope.

Edited by Scott-S6
  • Like 1
  • Thanks 1
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...