Gil80 Posted April 13 Posted April 13 In mission 4, I need to report back on a ship hunt. Using CTRL+\ to open the comms menu, then pressing F10, then selecting F1 or F2 yields nothing. Also when trying to communicate with the carrier for Inbound I get no response back from the carrier. The radio is set to the frequency of the carrier. When not playing a campaign, F10 comms works perfectly. Any ideas if it's a bug in the campaign?
baltic_dragon Posted April 15 Posted April 15 Hey @Gil80. Do you have Easy Comms set to OFF? For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Gil80 Posted April 15 Author Posted April 15 3 hours ago, baltic_dragon said: Hey @Gil80. Do you have Easy Comms set to OFF? No, easy comms is enabled.
baltic_dragon Posted April 16 Posted April 16 That is the problem. My campaigns will not work with Easy Comms, as they use active frequency switching and realistic radio usage. Turn it to off and that should solve the problem. Let me know if it helps! 2 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
sterny70 Posted April 17 Posted April 17 Hi Folks Same Problem here. Easy comms is off. Found the vessel, circling around, calling Knight, no effect. F2 isr working but this shoudln'tb e the puprose of the mission to be sent RTB LG Sterny
Gil80 Posted April 18 Author Posted April 18 (edited) On 4/16/2025 at 11:25 AM, baltic_dragon said: That is the problem. My campaigns will not work with Easy Comms, as they use active frequency switching and realistic radio usage. Turn it to off and that should solve the problem. Let me know if it helps! No, that didn't help. Even with Easy Comms enabled or disabled, I was able to use the F10 menu to report that I didn't find the last ship. I was then freelancing. I found the ship, and the little boat was shooting at me. With easy comms disabled, opened the F10 menu (CTRL+\ --> F10) then F1 to report skunk found at location. Nothing happens, except the same message to use F10 menu to report. So I cannot complete the mission. Edited April 19 by Gil80
SchneeFee Posted April 18 Posted April 18 Same here. Easycomms off. No Action when i report to Knight.
Gil80 Posted April 23 Author Posted April 23 @baltic_dragon can you please help? I've tried your suggestion but it didn't work. Thank you.
baltic_dragon Posted April 25 Posted April 25 (edited) Yep, will look into it and hopefully have it fixed for next week's patch. EDIT: @Gil80@SchneeFee@sterny70, I just checked everything and it is fine in the mission editor. Also, had two testers fly it and it worked as intended for both... we'll need to dig deeper what is happening. Do you have any unofficial / 3rd party mods installed? These tend to break the missions quite a lot. Edited April 25 by baltic_dragon For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Gil80 Posted April 27 Author Posted April 27 On 4/25/2025 at 12:57 PM, baltic_dragon said: Yep, will look into it and hopefully have it fixed for next week's patch. EDIT: @Gil80@SchneeFee@sterny70, I just checked everything and it is fine in the mission editor. Also, had two testers fly it and it worked as intended for both... we'll need to dig deeper what is happening. Do you have any unofficial / 3rd party mods installed? These tend to break the missions quite a lot. I use this mod: On Screen Message Size in VR And
JoniHH Posted April 27 Posted April 27 (edited) I posted this message yesterday in the Workaround Section because I had the same problem. But I found an easy workaround. Hope it work for you as well ! EDIT: Just tested it again because I saw that there other people with the same problem. The Workaround works (Hit the "I" Key from the I/R communication option. I have a binding on my Hotas and it worked again with this option) My other posting "I had a little problem with Mission 4 yesterday and today. I needed to cancel it for two times. As I spotted and flied over the smuggler ship, it says to use the F10 Option to give an update to Knight but there was no F10 Option available. So I was not able to proceed from this point. Then I remembered that you refreshed the campaign to the I/R system and I tried it again today. This time as I was asked to inform Knight about the smuggler it was also no F10 Option available but this time I only pressed my "I" Key for the I/R system and this triggered the correct message to Knight and I was able to proceed and finish the mission. Might be a user error from my side but I wanted to share it. So if you are not receiving a F10 Option at the smuggler ship at Mission 4 just hit the "I" Key from the I/R system and it will work. Have Fun " Edited April 27 by JoniHH i9-13900K, 4090, 64Gb DDR5 RAM, 2Tb NVMe M.2, Pimax Crystal Light
baltic_dragon Posted May 2 Posted May 2 @Gil80 @JoniHH thanks for reporting it here. It should be fixed as of next update, I found the issue and I think I fixed it. 1 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Gil80 Posted May 6 Author Posted May 6 On 5/2/2025 at 12:00 PM, baltic_dragon said: @Gil80 @JoniHH thanks for reporting it here. It should be fixed as of next update, I found the issue and I think I fixed it. Thanks! Can't wait for the fix
Recommended Posts