Engine do not start anymore after update

[MiGCap1]

No matter what I do, and I hadn't any problems to get the engine running before the update.

Anything new in the procedure I have overseen?

[MiGCap1]

Before the update, it worked smoothly. Starter engaged, stabilizing at 700 rpm, moving mixture to auto lean, waiting a little bit, moving to auto rich, disengage the starter and it runs perfectly.

Now it stops working after a few seconds at 700 rpm, at mixture cut-off, auto lean or auto rich, starter still engaged or disengaged after some seconds. Nothing works. I tried everything. 

All controls move into the right direction visually.

[Ronin24601]

What works for me is as soon as the engine catches, move the mixture to auto-lean and disengage the starter. (I.e. don't hold the starter after the engine has caught)

[GTFreeFlyer]

Nothing different on my end.  Same procedure as before.  You didn’t mention whether or not you prime the engine and open the throttle 1 inch before starting.  Those steps need to be done.  I also take fuel from the reserve, not sure if it matters for startup, but that’s what the procedure calls for takeoffs and landings.  
 

After priming 5 seconds, both mags on, battery on, fuel pump on, throttle 1 inch open, RPM max, mixture idle cutoff, and fuel tank set to reserve, my crank procedure is as follows:

Hold starter until RPM gets around 500, wait a second, go straight to auto rich, wait another second, release starter.  Works every time.  Sometimes I gently pump the throttle forward just a bit immediately when releasing the starter and then set it to 750 RPM, just in case it wasn’t getting fuel. 
 

 

[MiGCap1]

That’s exactly how I’ve done it before and after the update.

Before it worked perfectly, now the RPM drops after one or two seconds and the engine becomes silent.

[LeCuvier]

I executed the start procedure exactly as described in the EA Guide, and it worked. Except I never saw the "Engine primed" message, maybe I was not looking where I should.

[Art-J]

I recall reading that info about that "primed" message in EA guide is a leftover from earlier development phase, and you will not see it in current game verion.