Wilbus Posted yesterday at 12:01 PM Posted yesterday at 12:01 PM Not sure if this has been posted but I noticed something weird about the cargo. First of all, I've had just a short time in the module and been clicking around rather than reading the manual. I managed to load up some cargo, a bunch of boxes and I also managed to unlock it all in the air as I wanted to. Now, with everything unlocked I started to climb to see if it fell out but it didn't, it did however shift from side to side so the unlock procedure worked. So I thought, what if it's inverted? So I put her in a quite steep dive instead and quite right, all the cargo decided to slide out the back while in the dive. Anyone else tried this? I would seem the gravity kind of works in reverse here.
ECTAE Posted yesterday at 12:06 PM Posted yesterday at 12:06 PM yep, noticed on the CARP tutorial too got it on video
H60MTI Posted yesterday at 12:39 PM Posted yesterday at 12:39 PM I'm not the only one who noticed that? Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
winghunter Posted yesterday at 12:39 PM Posted yesterday at 12:39 PM (edited) did it behave like this? (timestamp) Edited yesterday at 12:40 PM by winghunter ASC DEV C-130J ASC DCS Web Editor - New 3D Mission Editor for DCS that runs in your browser DCS Web Viewer free browser based mission planner
AusGoose Posted yesterday at 01:01 PM Posted yesterday at 01:01 PM Investigating internally, thanks! 2
Wilbus Posted yesterday at 02:06 PM Author Posted yesterday at 02:06 PM (edited) Ok thank you all, so I am not going crazy! Yeah it behaves exactly like on the video Edited yesterday at 02:06 PM by Wilbus
JNelson Posted 19 hours ago Posted 19 hours ago 8 hours ago, winghunter said: did it behave like this? (timestamp) I'm not on the C-130 team so take my opinion with a grain of salt. It seems like the behaviour is correct, when you pitch over you have very little g, meaning the forces that would normally cause the crate to slide down hill are much lower (not to mention the actual slope is not that steep initially). At the same time the aircraft is accelerating. Supporting this when you reload the plane you see the second crate moves forwards again a bit. Whether the crate slides forwards or aft in the plane depends on exactly this balance of the acceleration of the plane, the gravity component down the ramp. Community A-4E-C
Nodak Posted 18 hours ago Posted 18 hours ago Having been a loady on starlifters and herc's way back in the 80's and 90's cargo moving forward should never even be a possibility, there's always going to be some sort of system preventing it, whether rail locks, physical block, or a strap gate. The side to side stuff shouldn't be happening either, the CDS was the most dangerous loads where there was a possibility back in my day because they were vulnerable to twisting and thus jamming up on the way out. The rollers only allow easy forward and reverse motion, not much lateral. If you are having lateral forces your not flying within acceptable parameters and won't be dropping any way. At drop speeds with partial flap, it's always a down hill exit that rapidly picks up speed as the load rolls out, you had to be careful you didn't end up falling out by keeping a hand hold and slow controlled walking speed with a clear unobstruced floor on an empty plane, cause you could easily exceed stopping speed yourself on foot and end up falling out. The typical load ripped out so fast you'd better have your visor down because the dust and debris it whipped up was getting in your eyes. What's missing graphically is the drogue chute system, those platforms aren't ever free rolling to begin with. We didn't free fall stuff, it got extracted. 1
Nodak Posted 18 hours ago Posted 18 hours ago (edited) That's how it actually works, there's a little bomb rack above the ramp that releases the initial platforms drogue chute, that platform has the next platforms drogue chute tied with break away tape to it's forward end with a long heavy nylon riser to rip it out for next ones deployment, than it pulls the next platform in sequence till all are gone. That chatter sound you hear are the platform locks on the rail giving way, they're spring loaded to a set tension one way, out. They can't be overcome by forward motion, but sheared off maybe in a crash. Edited 18 hours ago by Nodak 1
winghunter Posted 18 hours ago Posted 18 hours ago 17 minutes ago, Nodak said: Having been a loady on starlifters and herc's way back in the 80's and 90's cargo moving forward should never even be a possibility, there's always going to be some sort of system preventing it, whether rail locks, physical block, or a strap gate. Do you have an image of the rail locks? our understanding is that the J CDS doesnt have anything like mechanical locks. The extraction chutes will be added soonish, they're modeled but not visible yet 1 ASC DEV C-130J ASC DCS Web Editor - New 3D Mission Editor for DCS that runs in your browser DCS Web Viewer free browser based mission planner
Nodak Posted 18 hours ago Posted 18 hours ago Correct, CDS doesn't use rail locks, why there's a limit on the container size and weight. But they used gates to prevent forward motion, and a break away strap on the rear that is designed to fail at the correct time. Also they are going to be located as far aft as the center of gravity allows for minimum travel out. One had to be instructor qualified to drop CDS in 141's, never did it myself, but did everything else. They were more a SHTF type drop.
winghunter Posted 18 hours ago Posted 18 hours ago how do those gates look like ? we thought about adding the straps but they would be very clumsy to setup and block player movement ASC DEV C-130J ASC DCS Web Editor - New 3D Mission Editor for DCS that runs in your browser DCS Web Viewer free browser based mission planner
dresoccer4 Posted 18 hours ago Posted 18 hours ago 43 minutes ago, Nodak said: If you are having lateral forces your not flying within acceptable parameters and won't be dropping any way. welcome to DCS . we will be flying outside of acceptable parameters and we will be dropping everything. i'm excited to try my first inverted drop 1 Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
H60MTI Posted 17 hours ago Posted 17 hours ago Definitely need the drogue chute and the "gravity" thing fixed. Hard to do low level drops if I have to nose dive to ditch the cargo. 1 Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
Nodak Posted 17 hours ago Posted 17 hours ago Think it would be fine just to keep them from rolling forward, I had limited exposure to CDS stuff and that was over forty years ago in a long obsolete and retired air frame. It was still a relatively new thing under development in the early 80's, at least in Starlifters. Back than CDS was the flag pole local flying stuff in C-141's combined mainly with pilot and Navigator training, it could be done locally right on the Fort Lewis base ranges. The real cargo drops had to be done out at Moses Lake. They rarely dropped more than one or two CDS containers at a crack, it was considered extremely dangerous to drop a full compliment of containers and the jet wasn't allowed to ever be filled to capacity anyway, it had a limit how many, and I don't remember what it was, way to dangerous even in combat, hence a required instructor loadmaster rating. If it was that critical to get a major supply drop it would be delivered platform or load extracted anyway. I never flew a single training local except one air refueling pilot trainer with a butt load of cement blocks on pallets over Washington states mountain ranges. In the Starlifter you basically did all your training at the school level at Altus AFB than finish within real world ops with an instructor. Not like the Herc community flying many missions specifically scheduled as training. CDS was the one exception to that, those air frames just weren't available with that sort of down time prior to the C-17's showing up. They kept just enough people qualed on it to teach it if it had to be done, everyone knew it was ultimately a one way ride in that days cold war environment. 1
Someone Posted 16 hours ago Posted 16 hours ago 12 hours ago, ECTAE said: yep So i just watched your video. The main issue here is that you dont have any deck angle when they are released. While you would normally drop flaps to be level, when you are doing a cds drop like this, you actually are looking for around 6 degrees of nose up attitude/deck angle. This is what gets the cds bundles rolling out. Having said that, Im going to reduce the friction coefficients a bit in the next release, as stuff should be moving more quickly. 1 hour ago, H60MTI said: Definitely need the drogue chute and the "gravity" thing fixed. Hard to do low level drops if I have to nose dive to ditch the cargo. You dont need to nose down to drop cargo.
H60MTI Posted 15 hours ago Posted 15 hours ago I'm having the same issue with the pallets sliding forward also so, I need nose dice to "drop" pallets. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
Jenrick Posted 14 hours ago Posted 14 hours ago (edited) @H60MTI how are you dropping, manually hitting the jump button, or using the computer option? @Someone Ah, good to know the CDS should be moving faster, I have noticed that using the computer option the cargo seems to be taking a few seconds too long to exit the aircraft. With everything consequently going long. Edited 9 hours ago by Jenrick
H60MTI Posted 5 hours ago Posted 5 hours ago Right now a combo of 3 different things...I've tried the CARP, can't get it to work. I'm assuming it has something to do with the flight route in the CNI or can't figure out how to activate it. I've tried using the Geronimo lights for a manual drop and then having to nosedive. I've also gone in the cargo and just unlocked all the containers and nosedived. Doesn't really end up well in any of the cases. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
DD_Friar Posted 4 hours ago Posted 4 hours ago 9 hours ago, Jenrick said: 0MTI how are you dropping, manually hitting the jump button, or using the computer option? This is something I am also trying to work out. I have seen the CARP video but am trying to figure out a manual drop by either the pilot or the load master Visit the Dangerdogz at www.dangerdogz.com. We are a group based on having fun (no command structure, no expectations of attendance, no formal skills required, that is not to say we can not get serious for special events, of which we have many). We play DCS and IL2 GBS. We have two groups one based in North America / Canada and one UK / Europe. Come check us out.
ECTAE Posted 4 hours ago Posted 4 hours ago (edited) 11 hours ago, Someone said: So i just watched your video. The main issue here is that you dont have any deck angle when they are released. While you would normally drop flaps to be level, when you are doing a cds drop like this, you actually are looking for around 6 degrees of nose up attitude/deck angle. This is what gets the cds bundles rolling out. Having said that, Im going to reduce the friction coefficients a bit in the next release, as stuff should be moving more quickly. You dont need to nose down to drop cargo. Yeah, I was at 0º (flaps 50) to the horizon when I pressed the green light. But as you can see in the video, when I realized it wasn't dropping, I pitched up to 6º (then 10º, which on an airliner is the kind of angle that would make a trolley go down the aisle uncontrollably,then I pitched up 20º), and the cargo literally went up. That’s literally against the laws of physics. It's not about friction coefficients— you guys need to redo the script, because I'd say the friction is actually acting in the opposite direction. At some point, your μ>1. I'm not saying the cargo isn't dropping well as if you met those exact parameters, but if the condition necessary to tell the script to invert those friction conditions is having the plane at 6º when the green light is on, that's a different story. However, physics are clear—no cargo should go up when pitching up by 20º. Edited 4 hours ago by ECTAE
Recommended Posts