Jimbo Posted August 28, 2015 Posted August 28, 2015 Interested, but do you have an indication on cost incl. shipping to the UK?
Deadman Posted August 28, 2015 Author Posted August 28, 2015 HI Jim nothing has been made yet and I am rebuilding bot side console in a thinner lighter gauge aluminum. So there is no way to get you a final cost or shipping at this time. Sorry I should have a first run in Oct Items that will be available Left console Left console back plates (excluding the 2 each AN/ARC 186 it needs a redesign with digital indicators witch I don't have time to do or reasearch) All of the switch and encoder rotary holes will be all ready correctly placed. Right console Right console back plates. Center Pedestal with back plates for the TISEL and Breaker Panels. Fuel Quantity Back Plate Engine cluster Back Plate SAI, Clock,AOA, UHF remote Back Plate Arms/ HUD back plate Landing gear back plate The Dzus holes will be drilled for fake Dzus connectors. rivet holes will be pre made all you guys will need to do is rivet the consoles and center Pedestal together. Prime and paint the items. The Left console is currently designed for the real throttle I need to find a step file of the WH throttle to incorporate in to the console if there is any demand. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted August 28, 2015 Posted August 28, 2015 DM, I can make you a drawing of the TM WH throttle base if you want. Otherwise you have to wait until I have purchased the consoles and got them shipped over :smilewink: Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Deadman Posted August 28, 2015 Author Posted August 28, 2015 If you could that would be great I know if I don't make an adapter now it will just be a pain in the but. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
MacFevre Posted August 28, 2015 Posted August 28, 2015 Hi DM. I'm interested, of course. Apologies, I just saw the post. If there's anything I can do for you, please let me know. Buttons aren't toys! :smilewink: My new Version 2 Pit: MacFevre A-10C SimPit V2 My first pit thread: A-10C Simulator Pit "The TARDIS." Dzus Fastener tutorial, on the inexpensive side: DIY Dzus Fastener
Deadman Posted August 29, 2015 Author Posted August 29, 2015 I am working on the Aluminum back plate design the panels.The simulator panels I have are all different size stand off plates for the Dsub connectors and separate 5V DC lighting connectors. With several different IO board systems in development do you guys have a standard that can be agreed on? In other words what size plate and how should it be mounted behind the Aluminum back plate for each control panel? https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted September 1, 2015 Author Posted September 1, 2015 great it is good to see some interest in the parts. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted September 2, 2015 Author Posted September 2, 2015 Guys I have been reworking the left console Hans got me the Dimensions of the WH throttle it will not fit at this time.(originally we thought it would the top and bottom measurements of the unit are different) I am not really looking at a total rework to fit it in for the limited interest any suggestions? https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted September 2, 2015 Author Posted September 2, 2015 OK this appears not to be a problem the left console will be made for the real throttle only https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted September 3, 2015 Posted September 3, 2015 Yeah sorry about that Deadman. As my throttle was embedded in a console I hadn't noticed that its not brick shaped but more conical brick :cry: Should have checked sooner. Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Deadman Posted September 3, 2015 Author Posted September 3, 2015 Its no problem Hans. I offer special modification if people answer as in the case of not drilling previous knob casting to save them money. I comply with the majority's wishes If no one answers then I just make a replica and they have a choice to make the purchase or not. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted September 3, 2015 Author Posted September 3, 2015 I have received a PM from A10C-Wolf saying he can not post in my thread if any one else is having posting problems please contact a moderator. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Mr.Fenestron Posted September 6, 2015 Posted September 6, 2015 Thanks for the help DM, turned out to be a verification error. I completely support the Left console TM Hotas support. C'mon folks, I'd honestly wager most A10C people run with the TM setup and if not, perhaps an option harness/support bracket would work? With DM's blessing of course, I will post in other flight simulation websites directing users to this forum post in hopes of drumming up views and consumerism for DM.
Deadman Posted September 6, 2015 Author Posted September 6, 2015 The TM Warthog Throttle is to wide and to long for the current replica build. The best thing I might suggest is a platform to fill the opening for the real throttle. The red block in the attached pictures shows the problem with the angles and size. Thanks for the support https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Mr.Fenestron Posted September 6, 2015 Posted September 6, 2015 (edited) I see. The real warthog throttle assembly is very difficult to acquire, as is most other A-10 cockpit components. I will look into the disassembly, perhaps the throttle mechanical actuation mechanisms can be separated from the electrical components. While this would void the warranty, I see no other way if the TM Hotas is to be used... I wonder how complex the internals of the throttle mechanism would be to replicate via CNC assuming the electronics from the TM Hotas were used... This is just an after thought, and In no way do I suggest you do the legwork here, DM. *Edit* I found this video: https://www.youtube.com/watch?v=Fhjtd2DAz5E, jump to 4min 09sec to see the underside of the TM Hotas, cover removed. Also, a member from this forums "July865" had a picture with the cover removed as well. http://forums.eagle.ru/attachment.php?attachmentid=92767&d=1389133576 It is my assumption, that the TM Hotas had a centrally located throttle so the entire assembly would not tip over or scoot around. This is why things are arranged as they are as opposed to the real throttle. I wonder if a "box" of sorts could be made with all electronics mounted underneath and to the left or below the throttle assembly on a suspended metal plate, via 4 long screws; similar to Tachno's build. Check out the bottom picture here: http://tacnoworld.fr/?cat=19 for a better representation of what I mean. Edited September 6, 2015 by Mr.Fenestron
Deadman Posted September 6, 2015 Author Posted September 6, 2015 I seam to recall you living in the US so then you would easily be able to purchase a surplus A10a throttle from flight helmets.com just search for A-10. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Mr.Fenestron Posted September 6, 2015 Posted September 6, 2015 I just bought a throttle from the website. Thank you DM.
Deadman Posted September 7, 2015 Author Posted September 7, 2015 Welcome to the nut house of replica pit building. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted September 7, 2015 Posted September 7, 2015 Welcome to the nut house of replica pit building. :megalol: True Congratulations on your purchase A10C-Wolf :thumbup: Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
7rooper Posted September 7, 2015 Posted September 7, 2015 Well... DM, If I might suggest, I'd recommend to include a way to stuff the TM Warthog throttle in. This HOTAS is widely available and many people that want to step in the cockpit building wouldn't want to ditch their 400 usd investment for the TM WH. I checked the website you recommend and all I can see are A-10A throttles. No MiC, Coolie or Boat Switch on those throttles and honestly paying 275,00 in something you have to work a lot on doesn't justify for many people... Please consider this aspect and you will have more sales ;) Regards! My rig specs: Intel Core i7 4770 @3.4Ghz // Corsair 16GB DDR3 // MoBo Asus Z87K // HDD 1TB 7200RPM // eVGA Nvidia GTX 760GT 2GB DDR5 // LG 3D 47" 1920x1080 // Thrustmaster Warthog HOTAS // Saitek Combat Pro Pedals // Thrustmaster MFD Cougar pack // PS3 Eye + FTNOIR
Deadman Posted September 8, 2015 Author Posted September 8, 2015 Check my previous post.... I specifically list it as an* A-10A throttle*.Now if you want to suggest how I fit 10 kilo of crap in a 5 kilo bag keeping the required forward angle for the fuel panel.the length of the combined throttle and EAC just screws up fitting the TM Warthog throttle in the Left consol.Please see previous post with the red block..... 15 to 20 people wanting the version would be helpful as well. Please remember this is in no way a full time business.... https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
7rooper Posted September 9, 2015 Posted September 9, 2015 The problem with the TM WH is mostly the wrong slope between the LASTE panel and the throttles. However one could figure out an adapter for this set for those who prefer it over real throttles. With your permission of course, ☺ My rig specs: Intel Core i7 4770 @3.4Ghz // Corsair 16GB DDR3 // MoBo Asus Z87K // HDD 1TB 7200RPM // eVGA Nvidia GTX 760GT 2GB DDR5 // LG 3D 47" 1920x1080 // Thrustmaster Warthog HOTAS // Saitek Combat Pro Pedals // Thrustmaster MFD Cougar pack // PS3 Eye + FTNOIR
Recommended Posts