WildBillKelsoe Posted December 18, 2011 Posted December 18, 2011 I have an issue, I used my BS2 1.1.1.0 code and 1.1.1.1 wont let me activate using the same code. Please respond fast :mad: AWAITING ED NEW DAMAGE MODEL IMPLEMENTATION FOR WW2 BIRDS Fat T is above, thin T is below. Long T is faster, Short T is slower. Open triangle is AWACS, closed triangle is your own sensors. Double dash is friendly, Single dash is enemy. Circle is friendly. Strobe is jammer. Strobe to dash is under 35 km. HDD is 7 times range key. Radar to 160 km, IRST to 10 km. Stay low, but never slow.
Nate--IRL-- Posted December 18, 2011 Posted December 18, 2011 Are you sure you got the correct 1.1.1.1 version? Remember there are the Full and Upgrade versions of BS2 Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
WildBillKelsoe Posted December 18, 2011 Author Posted December 18, 2011 Are you sure you got the correct 1.1.1.1 version? Remember there are the Full and Upgrade versions of BS2 Nate I got English BS2 1.1.1.0 and English 1.1.1.1 patch I have the serial and harware codes if you like AWAITING ED NEW DAMAGE MODEL IMPLEMENTATION FOR WW2 BIRDS Fat T is above, thin T is below. Long T is faster, Short T is slower. Open triangle is AWACS, closed triangle is your own sensors. Double dash is friendly, Single dash is enemy. Circle is friendly. Strobe is jammer. Strobe to dash is under 35 km. HDD is 7 times range key. Radar to 160 km, IRST to 10 km. Stay low, but never slow.
orbiter28 Posted December 18, 2011 Posted December 18, 2011 I have the same problem here, i have upgrading BS2 to BS2 1.1.1.1. I have send a ticket into the user support. Exactly : When i launch black shark 2 patched, i have "this product need an activation". If i try an automatic activation, i have "invalid hardawre code". I can click on "you can disable this product on this computer", if i try to deactivate, i have the message "No license was found to be disabled."
WildBillKelsoe Posted December 18, 2011 Author Posted December 18, 2011 (edited) I have the same problem here, i have upgrading BS2 to BS2 1.1.1.1. I have send a ticket into the user support. Exactly : When i launch black shark, i have "this product need an activation". If i try an automatic activation, i have "invalid hardawre code". I can click on "you can disable this product on this computer", if i try to deactivate, i have the message "No license was found to be disabled." same here OMFG!! I got the one for upgrade, not the full which I have... Edited December 18, 2011 by WildBillKelsoe AWAITING ED NEW DAMAGE MODEL IMPLEMENTATION FOR WW2 BIRDS Fat T is above, thin T is below. Long T is faster, Short T is slower. Open triangle is AWACS, closed triangle is your own sensors. Double dash is friendly, Single dash is enemy. Circle is friendly. Strobe is jammer. Strobe to dash is under 35 km. HDD is 7 times range key. Radar to 160 km, IRST to 10 km. Stay low, but never slow.
G00dnight Posted December 18, 2011 Posted December 18, 2011 Doh same here..:( AMD A8-5600K @ 4GHz, Radeon 7970 6Gig, 16 Gig Ram, Win 10 , 250 gig SSD, 40" Screen + 22 inch below, Track Ir, TMWH, Saitek combat pedals & a loose nut behind the stick :thumbup:
G00dnight Posted December 18, 2011 Posted December 18, 2011 I thought it meant the full 1111 download or just the patch so went for the patch..downloading patch for full version now hope it just goes over the top.. new years resolution ...must learn to read.... AMD A8-5600K @ 4GHz, Radeon 7970 6Gig, 16 Gig Ram, Win 10 , 250 gig SSD, 40" Screen + 22 inch below, Track Ir, TMWH, Saitek combat pedals & a loose nut behind the stick :thumbup:
Nate--IRL-- Posted December 18, 2011 Posted December 18, 2011 I agree it is confusing. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
G00dnight Posted December 18, 2011 Posted December 18, 2011 all ok just installed correct patch over cockup and it works fine AMD A8-5600K @ 4GHz, Radeon 7970 6Gig, 16 Gig Ram, Win 10 , 250 gig SSD, 40" Screen + 22 inch below, Track Ir, TMWH, Saitek combat pedals & a loose nut behind the stick :thumbup:
jimcarrel Posted December 18, 2011 Posted December 18, 2011 (edited) I had the same activation box come up. After deleting the original Black Shark2 and installing full (bit torrent) 1.1.1.1 version. I started it up and looked around in the configuration options. I wasn't quite ready to re-config control stick. So I exited out of program. when I finally restarted Black Shark2 I got the "Star Force" (which I have never seen before) box wanting activation. went thru all the stuff including going to the website to validate install - three times - always told that I should be sure that I was trying to activate the right program. I thought "I should try rebooting" which I did. Two more times, I fought with the "Star Force" box. closed out Black Shark 2 once again. On the third restart of BS after reboot, that darn box quit popping up, and now all things are back to Normal. As far as I can see, keep messing with it, and it will clear up. Sure was fun. In both A10 and Black shark, I have never had to mess with "Star Force" before. I have always used the Full install for upgrading when it became available. No patches. Edited December 18, 2011 by jimcarrel Win 10 64 bit Intel I-7 7700K 32GB Ram Nvidia Geforce GTX 1060 6gig
WildBillKelsoe Posted December 18, 2011 Author Posted December 18, 2011 resolved: download full or upgrade as needed. Install game fresh, dont apply key, restart, patch, restart, apply store key --> voila... AWAITING ED NEW DAMAGE MODEL IMPLEMENTATION FOR WW2 BIRDS Fat T is above, thin T is below. Long T is faster, Short T is slower. Open triangle is AWACS, closed triangle is your own sensors. Double dash is friendly, Single dash is enemy. Circle is friendly. Strobe is jammer. Strobe to dash is under 35 km. HDD is 7 times range key. Radar to 160 km, IRST to 10 km. Stay low, but never slow.
Recommended Posts