avlolga Posted January 17, 2012 Posted January 17, 2012 (edited) Hi During the last month i have been working on Flight Simulation / Racing Seat. this is the result so far- Prototype - A it is very modular and you can add 2 touch screens in the sides. all of the Surfaces can be moved up/down for 50mm and can be turned to 180 degrees. the seat can be get high to in max 100mm. it is not done yet and i will get more photos for any of the options. i am using seat from real car - buying racing seat from ebay and ship to Israel is very expensive but getting those seat from car junk places are cheap. within one week +- i hope to finish the front console frame - it is going to be used for steering wheel, Pedals, front console panel / touch screen and up to 3 monitors. the frame can be build from wood too in low cost - jut get the seat or build one.:thumbup: Edited February 5, 2012 by avlolga
aircraft Posted January 24, 2012 Posted January 24, 2012 I will like to see your Sim working with 3 FOV monitors...nice work !
Deadman Posted January 24, 2012 Posted January 24, 2012 Looks like a good start :thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
WynnTTr Posted January 24, 2012 Posted January 24, 2012 Maybe it's the camera angle but it looks like you've got your stick to the right and in front of the edge of your seat. How does that sit with you? Because I'm thinking that you either swing your right leg out at an awkward angle or have them squeezed together (not doing your nuts any favours). It's a good job btw. Nice and clean.
avlolga Posted January 24, 2012 Author Posted January 24, 2012 Hi, 3 monitors stand will be in next phase.this week I hope to paint the one monitor 21-32" front stand support with small screen below as front console screen. The seat can be moved back and forward (it is car seat with same motions function). The control plate can be rotate in 180 degree and by that can be moved far from you with in 2.5". So you can adjust it in many ways. Thanks for your comments. Avi
avlolga Posted January 29, 2012 Author Posted January 29, 2012 Front Screen Unit Hi My update for the Front Screen Unit, this one is not only will support One 21"-32" screen , it is also support front console screen. some pictures, i will update when 3 screen stand will be ready and i will assemble it all soon. hope you like it. yes yes i do not have the screen attached - will be soon basic stand any ideas will be appreciated. Avi
Cali Posted January 29, 2012 Posted January 29, 2012 That is sweet! i7-4820k @ 3.7, Windows 7 64-bit, 16GB 1866mhz EVGA GTX 970 2GB, 256GB SSD, 500GB WD, TM Warthog, TM Cougar MFD's, Saitek Combat Pedals, TrackIR 5, G15 keyboard, 55" 4K LED
hassata Posted January 29, 2012 Posted January 29, 2012 (edited) That's pretty sweet. [Edit: sniped :D) Edited January 29, 2012 by hassata [sIGPIC][/sIGPIC]
HitchHikingFlatlander Posted January 30, 2012 Posted January 30, 2012 Awesome nice work! http://dcs-mercenaries.com/ USA Squad
avlolga Posted February 5, 2012 Author Posted February 5, 2012 Front Console support Hi this week update: instead of using this way: why not get this Front Screen Stand with Front Console support. this second screen can go up and down, and screen angle can be adjust screen holder: next coming update: two touch screen for panels with Helios support on the seat sides, or panel console farms that will be support left and right Panels.
Bearitall Posted February 5, 2012 Posted February 5, 2012 Nice lots of hard put into it....looks very simular to this no!!! Thinking the only difference is you made it from scratch...I bought it..but still nice:thumbup: http://www.getgadget.ca/ www.virtualtuskegeeairmen.com
avlolga Posted February 6, 2012 Author Posted February 6, 2012 Bearitall,your pit looks great. Yes Obutto is my model for inspiration, buying it and shipping it to IL is very expensive, i am member in Israeli leading flight simulation forum,site. PreFlight IL Simulation and i am creating this platform for our small community, we will use Real Car seats from car junkyard - they are good condition and low price, and i am responsible for frame and features building. . i have add /will add some extra and more features: * Second screen for front console. * Side Screens will used for panels. * Frames for panels beside the seat. * PC stand behind the frame. This current screen frame holder support 32" screen, it will support 3 screens.
Bearitall Posted February 6, 2012 Posted February 6, 2012 Bearitall,your pit looks great. Yes Obutto is my model for inspiration, buying it and shipping it to IL is very expensive, i am member in Israeli leading flight simulation forum,site. PreFlight IL Simulation and i am creating this platform for our small community, we will use Real Car seats from car junkyard - they are good condition and low price, and i am responsible for frame and features building. . i have add /will add some extra and more features: * Second screen for front console. * Side Screens will used for panels. * Frames for panels beside the seat. * PC stand behind the frame. This current screen frame holder support 32" screen, it will support 3 screens. :thumbup: MY hat off to you bud..nice work..from scratch..very detailed..you should make it for others if they want it..and charge alittle..unless the cost of material and time is costly.. But again great work and set up my friend..:smartass: 1 www.virtualtuskegeeairmen.com
Strix Posted February 6, 2012 Posted February 6, 2012 Great build avlolga! End result gone be nice. Win 10 64. GTX1080 ti 11 Gb, Intel i-5, 16 Gb ram, SSD 1,5 Tb, 2 Terrabyte HD, Monitor ASUS XG32V 144Hz, Slaw Milans Rudder Pedals BF109F :thumbup:, Joystick - HOTAS Warthog, Throttle - HOTAS Warthog, TrackIR V5. Pimax 5.
avlolga Posted February 6, 2012 Author Posted February 6, 2012 Bearitall,Strix Thanks , hope will have photos of them together.
Deadman Posted February 6, 2012 Posted February 6, 2012 That looks like a nice clean design Great work thanks for sharing!:thumbup: https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
avlolga Posted February 12, 2012 Author Posted February 12, 2012 Hi small update - i have got them together in my workshop, during this week i hope i will get it all connected for some demonstration. although this is just prototype and there is many small changes and tuning. Avi 1
cichlidfan Posted February 12, 2012 Posted February 12, 2012 That is really impressive.:thumbup: That design looks very saleable to me. Of course, shipping that here would be as bad as shipping an Obutto there, I am sure. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
avlolga Posted February 12, 2012 Author Posted February 12, 2012 Hi I have create this platform to out local fans and small community but i am also thinking upload it to ebay, but without the seat , i will look for 5 +- popular seat and fix hols to fit them, so you can get the seat from your region and by that save many $ for heavy shipping. i like the idea to provide all in one platform, you can start with one screen, stick of steering wheel, add any time Yoke, second screen for front panel use, side panels farm, side touch screen holders, 3 screen support. hope you like it.
Recommended Posts