Strix Posted November 7, 2012 Posted November 7, 2012 I have used this one for the plate, and the wheel https://www.elfa.se/elfa3~se_sv/elfa/init.do?init=2&shop=ELFA_SE-SV&item=35-846-87 but the plate that has the 75,50.25,00 has a different degree number do not really know which one to use to this one,but im working on it 18`is the encoder to use. :P Win 10 64. GTX1080 ti 11 Gb, Intel i-5, 16 Gb ram, SSD 1,5 Tb, 2 Terrabyte HD, Monitor ASUS XG32V 144Hz, Slaw Milans Rudder Pedals BF109F :thumbup:, Joystick - HOTAS Warthog, Throttle - HOTAS Warthog, TrackIR V5. Pimax 5.
DEChengst Posted November 7, 2012 Posted November 7, 2012 Looking great. Do want to further expand the panels I have. Will you be doing a run to sell these as well ? I must pass on a compliment for the panels I already have from you. Went to the electronics store yesterday to get my first set of switches for them. Brought the electric panel with me for fitting purposes. Store clerk said it looked really well. [sigpic][/sigpic] PDP, VAX and Alpha fanatic ; HP-Compaq is the Satan! ; Let us pray daily while facing Maynard! ; Life starts at 150 km/h
Deadman Posted November 7, 2012 Posted November 7, 2012 (edited) the plate that has the 75,50.25,00is on a 45 deg poss stop Do you have space for the encoder at the bottom of the AN/ARC 186 radio? That is a nice replica of the the thumb wheel nice work:thumbup: Edited November 8, 2012 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
linden Posted November 7, 2012 Author Posted November 7, 2012 Looking great. Do want to further expand the panels I have. Will you be doing a run to sell these as well ? I must pass on a compliment for the panels I already have from you. Went to the electronics store yesterday to get my first set of switches for them. Brought the electric panel with me for fitting purposes. Store clerk said it looked really well. Yes i will do a run when all the panels are ready, im working on the last ones now.
linden Posted November 7, 2012 Author Posted November 7, 2012 the plate that has the 75,50.25,00is on a 45 deg poss stop Do yoiu have space for the encoder at the bottem of the AN/ARC 186 radio? That is a nice reo of the the thumb whel nice work:thumbup: 45deg? i see, i need to find av way so i can use encoder, as helios use it to this switch. This is the encoder i use to the 3plates and the wheel, it work nice "20Pos, EC11B2020201" https://www1.elfa.se/data1/wwwroot/assets/datasheets/03584604.pdf Thanks for the info!!
linden Posted November 8, 2012 Author Posted November 8, 2012 The 75,50,25,00 plate is now changed so now the encoder with 18degrees work for this plate aswell. Thanks Strix!!
linden Posted November 8, 2012 Author Posted November 8, 2012 (edited) Next on the list is the MFCD, work in progress Edited November 27, 2012 by linden
linden Posted November 17, 2012 Author Posted November 17, 2012 (edited) Made little progress with the UFC Edited November 27, 2012 by linden
Gadroc Posted November 17, 2012 Posted November 17, 2012 Nice job on the backlighting there. Are those lighted tact switches or are you lighting it some other way?
linden Posted November 17, 2012 Author Posted November 17, 2012 The light is from a ledstrip, the light in the switches should be green, according to data sheet, but its not, its yellow-green and dosent look good."gonna use it for the Master Caution" But I decided to use them for the "top" is bigger and the buttons sitts better on these switches.
TomDK Posted November 17, 2012 Posted November 17, 2012 Great work ! :thumbup: My old, sold, pit: http://bilder.einzelart.de/thumbnails.php?album=74&page=3
Sci2 Posted November 17, 2012 Posted November 17, 2012 Looks nice! [sIGPIC]http://forums.eagle.ru/signaturepics/sigpic90574_1.gif[/sIGPIC] Australasian Gaming Community Specs: Intel Quad 2.4GHz -- Geforce GTX 560 Duo -- SSD HDD -- 8Gb Mem -- 23" led -- 17"touch -- Logitech G940 Flight System --JoyLocs-- TIR 5 -- Cougar MFD'S -- Helios -
0utLAW Posted November 17, 2012 Posted November 17, 2012 I'm so jealous. :notworthy: i7-8700k 3.70mhz|64GB DDR4 G.SKILL Ripjaw V 3200|ASUS ROG STRIX GeForce RTX 2080 8G GDDR6|AsRockZ390 Extreme4|2 Samsung 870QVO 1TB, 1 Samsung 860 QVO 1TB, 1 Samsung 860EVO 500GB|Corsair 750D|Corsair H-100i|Corsair AX750|LG 34GN850-B|Acer UT241Y|TM Cougar MFDs| Buddyfox UFC|TM Warthog HOTAS(Modified Spring/Slew Control Stick, Upgraded PCB, Stick Extension)|Saitek Combat Pedals|Corsair Nightsword|Corsair K70|TrackIR5|Custom A-10C Panels|
Mindz i Posted November 17, 2012 Posted November 17, 2012 Next on the list is the MFCD, work in progress Alright, now you've got my attention. I'm wanting to build one of these and will be taking notes. The more details on this the better.
stelios2000 Posted November 18, 2012 Posted November 18, 2012 can you please post it(MFD) in 1/1 scale or in pdf file ? i wanna try this with plexiglass.... thanks in advance
linden Posted November 18, 2012 Author Posted November 18, 2012 Sure, but it still under construction just so you know.MFD.rar
linden Posted December 5, 2012 Author Posted December 5, 2012 A little early Christmas gift to myself:)
saskcan Posted December 11, 2012 Posted December 11, 2012 Merry christmas Merry Christmas and great build! The CNU (and everything else) looks great! Also the paint color looks spot-on! Good luck and looking forward to upcoming posts!
linden Posted December 12, 2012 Author Posted December 12, 2012 Thanks and Merry Christmas to you..... I have completed all panels, waiting to get them home from the laser company then I'll start building for real :)
Duckling Posted December 12, 2012 Posted December 12, 2012 Congrats to the Altimeter, Linden. Could you post some pics of the rear and a side view of it ? - - - -
whartsell Posted December 13, 2012 Posted December 13, 2012 What a coincidence. In the simmeters altimeter they have the same Stepper motor I plan on building my instruments from. I plan on using amtel Instead of pic controller. If I get it working ill post pics of how to do it. Arduino,EOS and Helios Tutorial Static ATC menu mod
linden Posted December 25, 2012 Author Posted December 25, 2012 Finally I got the last panels,need to some smal change on the vhf otherwise all the panels are finished.
Recommended Posts