Panda_DCS Posted December 16, 2020 Share Posted December 16, 2020 I dont even have that option Sim Rig: Intel i7 9700k, SSD, GTX1660Ti, 32 GB DDR4, Windows 10 HOTAS: TM Warthog, MFG Crosswind Pedals, Opentrack - DIY HeadTracker IRL: Private Pilot - IFR, Part 107 Drone Pilot Link to comment Share on other sites More sharing options...
crash test pilot Posted December 16, 2020 Share Posted December 16, 2020 Oh I see you are using version 20151118, maybe you could upgrade to 20160818 (recommended by sokol, who wrote this program). You would need to upload new firmware to your board. Or you just test the "switch" setting? Link to comment Share on other sites More sharing options...
Panda_DCS Posted December 16, 2020 Share Posted December 16, 2020 I did just notice your screenshot had a newer version...guess I will try that since nothing else has worked. Didn't even realize my version was so old. Sim Rig: Intel i7 9700k, SSD, GTX1660Ti, 32 GB DDR4, Windows 10 HOTAS: TM Warthog, MFG Crosswind Pedals, Opentrack - DIY HeadTracker IRL: Private Pilot - IFR, Part 107 Drone Pilot Link to comment Share on other sites More sharing options...
Panda_DCS Posted December 16, 2020 Share Posted December 16, 2020 (edited) I looked at github and am only getting the 2015 version. Can you help with a link to the newer version? I believe I found it... Edited December 16, 2020 by Panda_DCS Sim Rig: Intel i7 9700k, SSD, GTX1660Ti, 32 GB DDR4, Windows 10 HOTAS: TM Warthog, MFG Crosswind Pedals, Opentrack - DIY HeadTracker IRL: Private Pilot - IFR, Part 107 Drone Pilot Link to comment Share on other sites More sharing options...
crash test pilot Posted December 16, 2020 Share Posted December 16, 2020 (edited) https://sites.google.com/site/mmjoyproject/fajly-dla-skacivania Edit: me<---idiot Edited December 16, 2020 by crash test pilot Link to comment Share on other sites More sharing options...
Panda_DCS Posted December 16, 2020 Share Posted December 16, 2020 Thanks! I found the download on the 1st page of this thread and now it works...I appreciate your time and responses! Sim Rig: Intel i7 9700k, SSD, GTX1660Ti, 32 GB DDR4, Windows 10 HOTAS: TM Warthog, MFG Crosswind Pedals, Opentrack - DIY HeadTracker IRL: Private Pilot - IFR, Part 107 Drone Pilot Link to comment Share on other sites More sharing options...
crash test pilot Posted December 16, 2020 Share Posted December 16, 2020 Have fun! Link to comment Share on other sites More sharing options...
Sergey_Pe Posted December 16, 2020 Share Posted December 16, 2020 4 hours ago, crash test pilot said: recommended by sokol, who wrote this program Just to clarify- with all my huge respect to Sokol1_br, who is doing a lot for the community, MMJoy2 was written by a different person. It's Mega_Mozg, who is now a chief software designer at Virpil Controls. Link to comment Share on other sites More sharing options...
crash test pilot Posted December 16, 2020 Share Posted December 16, 2020 36 minutes ago, Sergey_Pe said: Just to clarify- with all my huge respect to Sokol1_br, who is doing a lot for the community, MMJoy2 was written by a different person. It's Mega_Mozg, who is now a chief software designer at Virpil Controls. Now i feel really stupid, because i wrote so and deleted it because the thread about mmjoy here and in simhq was started by sokol... me<---double idiot Link to comment Share on other sites More sharing options...
Sergey_Pe Posted December 16, 2020 Share Posted December 16, 2020 1 hour ago, crash test pilot said: Now i feel really stupid, because i wrote so and deleted it because the thread about mmjoy here and in simhq was started by sokol... me<---double idiot Sokol is keeping an eye on everything interesting and useful coming up in simulation area. And he is always eager to share his findings which is great! 1 Link to comment Share on other sites More sharing options...
Sokol1_br Posted December 16, 2020 Author Share Posted December 16, 2020 9 hours ago, crash test pilot said: maybe you could upgrade to 20160818 (recommended by sokol, who wrote this program). Oops, my only contribution for MMJoy2 was English translation of some early versions and spread the project in every sim forum I know (an half dozen). MMJoy2 firmware author is MegaMOZG, based on previous Mindaugas (2004) MMjoy-8/16. MegaMOZG now work for VirPil as electronic developer. 2 Link to comment Share on other sites More sharing options...
crash test pilot Posted December 16, 2020 Share Posted December 16, 2020 Mea culpa... Thanks to both of you for outstanding work! Link to comment Share on other sites More sharing options...
degrave Posted December 21, 2020 Share Posted December 21, 2020 (edited) I want to use 7 axes on my joystick for steering wheel, brake, accelerator pedal and 2 analog joystick. Is it possibble? I can use 3 of them with x,y and z axes, but i could find to entegrate other 2 axes for my analog joystick. How can i do that? if it is not possible, can you guys explain me how can i use "axis to button" section with details? Edited December 21, 2020 by degrave Link to comment Share on other sites More sharing options...
crash test pilot Posted December 21, 2020 Share Posted December 21, 2020 You can use 8 axis in mmjoy, in the assignment column you can choose from X, Y, Z, rX, rY, rZ, slider and dial. I dont think they have different behavior, its just names. Try it! Link to comment Share on other sites More sharing options...
Repvez Posted January 30, 2021 Share Posted January 30, 2021 Hi, Sorry If I disturbe this topic, but I would like to ask some help for my MMJOY2 problem. If it is not the right plaece please send me PM or give me a link . (I asked this the another forums, simHQ and il2sturmovik.ru) https://ibb.co/N7CCKFj I have a Chinese version of the MMJOY with shield. https://ibb.co/85Xsxdz And this is in life: https://ibb.co/vL3Pv7c I coloured the pins where I put the wires ,same colour same wire. So my problem is that I use one of the shift register in my FLCS joystick handle grip. I connected those buttons like the pic show. red wire is the common GND and the others are the individual buttons. When I connected to the PC and set up in the MMJOY program (see above) the shift register is 74hc165 (i'm not sure about that because I can't see on the chip) and 3 chip the CS and DATA pins are D0 and D1. But the 4021B set up is no working . And when I want to test the buttons they only work in the top of the 2 sockets on the shift register ( on the pics are circled). If I put other buttons there, they also work, but just in those sockets. I don't know what could be the problem if all of the buttons are working and the program is also recognise it, except the rest of the 4 sockets . I have only one strange thing, If I connected the shield to the PC without the shift register just alone then there are some buttons (from 17 to 24)which are flickering in the program . These buttons are recognised and work from the shift register also. So from 17 to 24 buttons are in the top of the shift register 2 sockets. If we can solve this problem I would like to convert my FLCS/TQS. And I want to use this set up: https://ibb.co/p2kjmNV https://ibb.co/HDc5bTp https://ibb.co/3NwzgQX https://ibb.co/kJq0Bp1 But I don't know how should connect to the arduino pro micro these device. Which wires can I put together like the VCC and the GND. could The TLE5010's 6 pins of 5 be the common with the others? And can I use 4 TLE5010 and 6 other normal potmeter in the same time on only one pro micro? As you can see on the schematic, I would like to put the pro micro inside the TQS base, and the all others wires could be collected from others to there. Can somebody to check it and give me some advice to it? Or any other info about that how can I reach my goal that there be a workable HOTAS. other board or other program . Thank you. Link to comment Share on other sites More sharing options...
slowmover Posted March 1, 2021 Share Posted March 1, 2021 I have a problem with arduino pro micro. I have destroyed many of them because the usb port on the arduino is very sensetive and brakes. Any solution how to avoid that? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
crash test pilot Posted March 1, 2021 Share Posted March 1, 2021 An expansion cord with usb-b port mounted in your box, or desolder the micro-b usb port from the pro micro and solder an usb-cable directly to it, or use a teensy ( the have a more sturdy mini-b usb port). Link to comment Share on other sites More sharing options...
Sokol1_br Posted March 1, 2021 Author Share Posted March 1, 2021 (edited) 3 hours ago, slowmover said: I have a problem with arduino pro micro. I have destroyed many of them because the usb port on the arduino is very sensetive and brakes. Any solution how to avoid that? An "add-hoc" solution, with available materials: - USB cable is secure. - Have space for put fixing screws for the assembly. Can use a small breadboard piece. Edited March 1, 2021 by Sokol1_br Link to comment Share on other sites More sharing options...
Cerppo Posted March 18, 2021 Share Posted March 18, 2021 (edited) Hi, i made this and i face a problem i cannot fix. (looks like internal config of mmjoy is not "correct" - eeprom pb ? ) When i test all the buttons they work as expected. but, when i launch VKB button tester some are lit. (as if they were configured as button inverted) If i "short" the 74 it shows pysically up , but reported down. if i short the 75 it "works" but on/off very fast (some ms ) even if i keep the button pressed. If i change the config of timer1 , it lights the button 37 !! Timer 2 add another button .. etc.. Looks really like the config memory if overflowing somewhere and informations are "misread" to translate and report button physical status to windows. Any idea welcome. Edit: Tested 20160818 upd1, tried with the firmware after exactly same behavior. Edit : Tested with another Arduino not connected to my board. The behavior looks the same... Edited March 19, 2021 by Cerppo Add some info testing on another board Link to comment Share on other sites More sharing options...
washiestsnake Posted April 11, 2021 Share Posted April 11, 2021 Where can I find the latest version of MMjoy in English, every version ive downloaded have been in Russian. Link to comment Share on other sites More sharing options...
crash test pilot Posted April 11, 2021 Share Posted April 11, 2021 Just change language on main screen: Link to comment Share on other sites More sharing options...
Cerppo Posted April 12, 2021 Share Posted April 12, 2021 As i got no solutions to the MMJOY "bug" , i started to write new code based on Arduino Joystick 2 to drive my board. Works perfectly for the 96 buttons. still need some lines of code to read MCP3208 Axis Values. ( learned a lot doing this ) I also should have looked to Freejoy ... which i discovered recently. Link to comment Share on other sites More sharing options...
TomVR Posted April 18, 2021 Share Posted April 18, 2021 (edited) Okay here is one that's been pulling my hair out. I have some buttons (40, 50, 49, 36 42) connected via a shift register (CD4021) that in the mmjoy2 interface work perfectly fine, but then in VKB joytester these buttons working extremely intermittently, like if I spam them very rapidly they will fire, but just toggling them on I get nothing. I guess it's a software issue? Using Version 20160818 Is it a bugged setup? Edited April 18, 2021 by TomVR Link to comment Share on other sites More sharing options...
Sergey_Pe Posted April 19, 2021 Share Posted April 19, 2021 6 hours ago, TomVR said: Is it a bugged setup? No it's not. 6 hours ago, TomVR said: mmjoy2 interface work perfectly fine, but then in VKB joytester these buttons working extremely intermittently How did you define these buttons in MMJoy configurator- as "Button (norm)"? Link to comment Share on other sites More sharing options...
TomVR Posted April 19, 2021 Share Posted April 19, 2021 6 hours ago, Sergey_Pe said: No it's not. How did you define these buttons in MMJoy configurator- as "Button (norm)"? The only things I have a special configuration are a few toggle switches much further up in the button set and encoders. The buttons having issues are just normal buttons (And can't be set as custom functions anyway as they are beyond 32) I've attached the setup file. f18quad_20210418.mmjoy f18quad_20210418.mmjoy_HID_txt Link to comment Share on other sites More sharing options...
Recommended Posts