Jump to content

TIGEREAGLE

Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by TIGEREAGLE

  1. No sound in the cockpit from the APU, turbines and seat adjustment motor? This only happens if you delay entry into the cockpit! How and why: To carry out a virtual pre-flight check, you can put the module into an uncontrolled state for around 20 seconds, after the module wakes up you can jump into the cockpit! I have never noticed this effect with the modules before, only now with the A-10CII and the A-10C. This effect was not present before either! A test mission: 00NT_SP_A10CII_NoSound MAP Nevada 00NT_SP_A10CII_NoSound.miz
  2. I have the same problem with my virus scanner from GData, I can't fly the Harrier! Who wants to get their hands on our data again?
  3. I can also confirm this, it's not just with the AH64 but also with other modules. I flew an evening mission on the Nevada MAP, so the transition from evening to night and the flashes can be seen not only in the cockpit but also on the outside, the module is briefly brightly lit! Flying with VR is not pleasant! And the weather was not set for a thunderstorm!
  4. Hallo Vital061270, how do I imagine that? Of course logical! 1. The preset settings that I set in the Misstons Editor are only in the preset memory of the radio! 2. When the radio is cold restarted, either the lowest or highest frequency is set to the radio or an emergency frequency. 3. I would also like the frequency change button to work properly! Not like now, if you change the current frequency on the left, the frequency on the right is changed at: VHF on Preset 1 UHF on 305,000 MHz FM1 on Preset 1 FM2 on Preset 4 It could be that I don't understand the logic of the frequency change button! That would be optimal. TIGEREAGLE
  5. Preset error or? Why are the preset channels immediately transferred to the radio device? For VHF it is the first channel of Preset. In UHF it is also the first channel of Preset. For FM1 it is third channel of Preset? On FM2 it is fourth channel of Preset? Very strange behavior? Greetings Tigereagle
  6. Servus,
    was gibs neues, läuft alles bei dir.
    Gruß Gerhard

  7. In the mission editor, FM1 and FM2 radio presets are swapped! Maybe it's already known, but couldn't find it during a quick overview? Greetings Tigereagle
  8. Time passes and the AI still can't land properly? Sure that the airload is not suitable as a Ki landing site!
  9. Where did the sun visor come and will it come again? And why is that not a standard for all flight models?
  10. Hello Varjo Areo owners, I got myself one as a Christmas present for DCS and Il2-Sturmovik. Looked at the instructions and the comments here, I wonder how you do it, I'm totally frustrated with buying the Varjo! I would be very interested in what FPS you have in DCS and what settings you have. I have an RTX 3090, I9-10980XE 5GHz, 64GB RAM 4GHz, M2 drive and get set to VR mode in DCS and 32 PPD (Low) in Varjo Base, and only get 20FPS in DCS and 45FPS in Il2? Greetings Tigereagle
  11. Radio preset selection? If you switch through the radio devices with the joystick button (PTT/RTS switch) instead of the RTS rocker button, the preset selection will not be accepted! Why?
  12. Alignment Positioning in Mission Editor! The position alignment no longer works in game! Units aligned in Mission Editor are not displayed correctly in game! why
  13. Yes, but if the inner tanks are full and the balance of the front and rear tanks is set to normal and the two turbines have the Indian fuel consumption, shouldn't the additional tanks be empty at the same time? And this is not related to this topic: FalcoGer, missions under an hour are boring, I build missions that go over three hours a night, it's a bit challenging but not boring!
  14. Ok thanks that means the outermost pylons are just additional for the inner pylons suspended fuel tanks. Additional tanks must therefore always be attached to the inner pylons. Then the only question that remains open is why the right side is always empty faster than the left?
  15. Sorry i know, badly formulated and translated! It's all about the outer Fueltanks on the pylons! Pump L AUX and R AUX! If additional tanks are attached to the outer pylons, the L AUX and R AUX pumps cannot be switched on!
  16. Yes long has it been? But AI helicopters still can't land on the helipads (41-53)! What a pity!
  17. RADIO VHF every two Hello, where are the RESET channels on VHF radios 2 to 5, don't give it or what? The wheel does not turn from 1 to 6. is the same with the A-10C?
  18. Helicopter landing sites are useless, no AI helicopter can land there! Why can't a SU-33 take off or land at parking spaces 11-27? It would be nice if that could be fixed. Thank you Tigereagle.
×
×
  • Create New...