Islari

Hello Zabuzard I'll try to find a track to share with you Just in case about the slight move we generally perform the alignment while chokes on to prevent this problem, so no move intended.

Hello, It's been multiple times that the INS align process is completely bugged. I follow every procedures found on the manual, and the issue also happened during the WSO Cold Start tutorial. It seems that the ALIGN light never goes blinking when the issue happens, I waited over 30 min with a steady align light in the tutorial (so you can assume every steps were perfects as it is guided at least for this example). I finally switched the INS knob to NAV and it seemed to have validated a BATH alignment at least. Sometimes everything works as intended, but sometimes not, with the exact same procedure.

Since last update I've encountered this problem many times, every time my pilot get shot by a round (not explosive or missile) my game immediately crash

The refuel guidance lines are wrong for everything but F-16. They've been made by ED for it, not for the others planes It's an ED side wishlist to be made

This is clearly not HB fault as we've seen flying a pretty build of the F-4 for few days on content creators screens. You know how HB could just become the best add on creator ? Giving everyone (who has preordered it) the same key as the content creators. As mentioned before by someone else, I am one of the guys who took one day off, so this last minute mess will gonna cost me around 200$. If they had told us that delay before, we could have canceled our day off.

dcs.log It seems to come from DTC or The Way Ok, it's DTC dcs.log

OK this time it worked ! I have deleted every scripts hook and liveries from my install. Can't figure which one was harmful, and I hope this is not the Quaggles commands because I really need this one dcs.log

@Lord Vader Well, I deleted all mods, deleted fxo and meta.. again. I repaired the install to make sure that there is no mods left It's better, but not perfect. Now 30% GPU use, I get about 25fps on 4YA Caucasus I only let SRS and TACVIEW because.. well everybody is using those ones I would not be the only one to get this problem Here is the .log: dcs.log

Hello, For the driver part you're right, it's updated. For the FXO and Metashaders2 it's already done too, first thing I did. I'll try the delete mods things

Sure it has max owner plan since years. The thing is that this problem is only when piloting F16 in MP. Every other aircraft is ok Just to be sure I went to my powerplan to verify, it was well set

I just figured out something while trialing the F16, When I go on any server, my F16 performance are horrendous , I get like 5fps. After some check, it appears that the GPU is not activated and does not provide any calculation (GPU at 0-5%) As soon as I jump in another aircraft (M2000, F18, F15E, F14B), GPU starts to work and everything is ok (60 to 100fps depending on the server and people connected) It does not happen in solo, everything is ok on this side (100 to 120fps). Does not depend on map selection, same behavior is observable with every map (-+ some fps due to usual map which take more resources) My sys specs are: CPU: Ryzen 5800x GPU: RTX 3080 RAM: 32go 3600mhz Indeed I tested to delete the module then re installing again, then I proceeded to a DCS full repair (with and without the module installed) Added last log and track files where a crash happened Legend for the picture: Image/s: FPS Utilisation de l'unité centrale: CPU use Utilisation du process. graph: GPU use dcs.log Tacview-20240505-224855-DCS-Client-4YA_Syr_PVE2_V2.46[04_MAY_OVC_RAIN].zip.acmi

Nothing un France yet. Did you received some mail to announce the shipping + tracking number or it was complete surprise ?

Thanks. Will try it tomorrow

Nop, same problem here, I found that using the Skywalker is not enoughly precise when fine tuning the rudder to aim in Mi-24 due to this kind of dead zone

Hello. I just received my Winwing rudder but I'm very surprised that it is branded as Skywalker. Even in the software it is branded as. I wonder if they just sent me some pre serial item that will not be updated further

Hello, Unfortunately the Winwing F-15ex is not centering, but the real one is. Either the real or razbams one are proportional rotary. It's a shame, but I'm using the self centering wheel at the left of the TDC on my F-15ex Winwing for radar elevation instead of the real input

There's a mod that already do it: DTC DCS

Hello, I run into some ERR and EXT on PCA even I downloaded your last .lua on higher posts

Same bug as Mirage 2000, The F15E needs to have the antenna elevation pretty neutral to find lower targets. Otherwise setting real elevation corresponding to object altitude will return nothing

It has nothing to do with this problem until FQI as a centralizer of fuel management is bugged ?

Don't ask me why I do that but here is the result: In flight, dumping fuel -> OK Set afterburner -> Dump stop, OK Set Throttle Idle (or not AB) -> Fuel stop working for the session, even if I land, stop the aircraft and redo a proper cold start

It is also working like that on F18. Seems to be a DCS issue

When you push JETT or EMER JETT with left mouse click, you can see the animation of the button but nothing happens. Right clicking it will actually jettison but no animation on the button

Same for M2000C, even with the Magic-DDM version which use to be very effective. I can't count the number of missiles I took in the a** with only few spikes for radar tracking. I even managed to visually see a launch without any alert. The only way to stay alive is basically to spam flares and chaff while activating full jamming when receiving a spike.

Seen that, it is working well now. Thanks Razbam !