millmax

Has anyone found a site benchmarking 3080 and 3090 with DCS?

Got my slew axis upgrade kit from Delta Sim today. The quality seems very good. Easy to install with good documentation. Restored default settings in USB game controllers. Installed new Thrustmaster drivers. Rebooted. Ran the Throttle Warthog Calibration (V1.07) tool from Delta Sim Electronics homepage. The button click works and registers as BTN1, but no luck with the axis. What can I do?

F-16C coming to DCS according to wags • Exciting new aircraft coming to DCS World like the F-14 Tomcat, F/A-18C Hornet, F-16C, F-4E Phantom II, Mi-24P Hind, P-47D Thunderbolt, and many more! Source: Soooo... what are your thoughts on this? Edit: Added screenshot

I've ejected, and my wingmen have ejected, while flying in canyons in enemy territory after loosing one engine. Even with stores jettisoned you'll have a really hard time trying to climb a mountain pass up ahead. Being able to override fuel flow and gaining thrust would be of tremendous use for us, even though it might lead to an engine write off after landing (depending on the temperatures reached during override, of course). I hope this illustrates a real world example that members would appreciate implemented, even though A-10 might have a feature complete status.

Thanks, didn't realize that two of the screenshots did have the GPU and CPU load. The way I read the figures, DCS is never albe to "max" the 1070, and the CPU load would equal two cores running at max. Right? Wrong??

Right now DCS comes with a 6.44 MB Web Installer. I think it supports resume, but I'm not 100% sure. Anyway, with a 90k bandwidth, I'd recommend you to bring your computer with you to a place with proper internet connection and do the installation there.

If you are referring to the Founders Edition your statement holds true. But the vendors have released overclocked versions of the card. So far, Asus and MSI have the fastest cards with Asus ROG STRIX-GTX1080-O8G-GAMING having a small edge on the MSI card. Google around a bit, and you'll find the different versions Edit: included link to one of the reviews: http://www.guru3d.com/articles_pages/asus_rog_strix_geforce_gtx_1080_review,24.html

Hi! I'm looking to upgrade my GTX 780, and I've got an Asus 4K G-Sync monitor. Do you, or anyone else, know if you are now GPU limited or CPU limited? If the 1070 maxes the CPU I see no need at all to spend the extra money to get the 1080. I'd be REALLY grateful to answers to this (GPU / CPU limited at 4K). I think MSI Afterburner (or similar tools) will give you the answer, it shows GPU load) PS2: I've got a I5-2500K CPU running at 4.2 GHz watercooled

Great work, much appreciated

I think you'll have to move that excel file to a pulic folder location within dropbox to be able to share it on the forum.

You are probably looking for TMS forward long. Also, if the waypoints have altitude above groundlevel, the TGP will stare straight through the waypoint and into the ground far away, hence you will see no targets. Also, take a look in the lower left side of the HUD, there you will see either STPT or TDC as an indication to what is the TGP sensor designator. This is described at pages 400-401 in the manual

Edit: Yes, you will be fine, this is with a single GTX 780 OC and a i5-2500K @ 4.2 GHz, 16 GB RAM. Got 2x 24" and one 27" 4k monitor with Gsync, running DCS only on the 4k. After removing nvidia experience, I get 170 FPS at low settings at 4k in DCS World 1.5.2, instant action A10C, georgia hills easy. (Before I uninstalled the nvidia stuff I got approx 20 FPS. That's a long way from 170 FPS that I get now.) Edit 2: With 16x AA, high, textures, 2X MSAA and Ultra view range I still get 140 FPS.

Thank you for sharing this! Using DCS 1.5.0 fails to load "CONTROLS" page if the following two lines are present in default.lua: --Alternate Weapon Selection Dial --{down=device_commands.ASPlauncherSelect,cockpit_device_id=devices.WEAPON_CONTROL,value_down=weapon_selecter(),name='Select Weapon Dial Clockwise',category='Weapons / Select'}, --{down=device_commands.ASPlauncherSelect,cockpit_device_id=devices.WEAPON_CONTROL,value_down=weapon_selecter(),name='Select Weapon Dial Counter Clockwise',category='Weapons / Select'}, Switching to another tab and back to CONTROLS seems to resolve the problem, but all the alternates are gone. Commening out the lines like above fixes the issue. Is the clockwise / counterclockwise broken in 1.5.0? Edit: just upgraded to 1.5.1, same issue there

Tried running as admin - same result. Had a working router setup prior to OS reinstall, didn't change a thing there. I'm suspecting BitDefender of blocking the outgoing or incoming request, even though it SHOULD let traffic through, especially when disabled. But you never really know with AV suits. Update: All of a sudden it started working. I turned off web protection "Scan SSL", "Protection against fraud" and "Protection against phising". Like I've tried in the past. Then I was able to connect to multiplayer. And to the module manager. Tried to enable all BitDefender features, still working. Running DCS without admin - still working. It almost feels like someone at the ED side of things fixed something about my DCS World user account a couple of minutes ago.

As I said, Windows runs just fine, nothing wrong with the ISO installation image. DCS also runs fine, nothing wrong with the installation binaries. If you read my OP, I am having issuing connection to the master server from within DCS World. That has nothing at all to do with the ISO image used for my windows installation. (BTW: I even checked the SHA-1 checksum of the win iso prior to install) Any other thoughts would be greatly appreciated.