splash

Hi, Suddenly I've had a similar problem to the aforementioned. I didn't change anything: and I'm still using my Windows 7 and did not make hardware changes. When I tried to start a mission for Black Shark 2 it appeared a message indicating "there were hardware changes in my system or something like that". It happened twice. I pressed cancel button and exited the program. After that I run DCS again and started a MiG-21 simulation with no issues. I only have a License0 folder under: [HKEY_LOCAL_MACHINE\SOFTWARE\Leatherneck Simulations\DCS:MiG-21 BiS\Keys] and a SilentActivationSerialNumber=XXXXXXXX under [HKEY_CURRENT_USER\Software\Leatherneck Simulations\DCS:MiG-21 BiS\Keys\Settings\Binding\Hardware\AutoActivation] I think it didn't create a new hardware profile, right? Could you tell me how can I check my activations/deactivations left? Thanks in advance.

Tried here with quick start missions and no problems detected, but it fails when you create a simple mission with a Huey. This is my DCS-20150727-172010.crash file: # -------------- 20150727-172010 -------------- # C0000005 ACCESS_VIOLATION at D7A18F26 00:00000000 00000000 00000000 0000:00000000 D7A18F26 0013E570 0000:00000000 D7A1A320 0013E630 0000:00000000 D96B42AE 0013E670 0000:00000000 ?start@avDevice@cockpit@@QEAAXI@Z()+2E D9760037 0013E6A0 0000:00000000 ?start@devices_keeper@cockpit@@QEAAXXZ()+57 D975FFC1 0013E6D0 0000:00000000 ?start@ccCockpitContext@cockpit@@QEAAXXZ()+41 D9759CE6 0013E710 0000:00000000 ?parseGlobalConfig@Clickable@cockpit@@QEAAXXZ()+1566 3F6C24AB 0013E740 0000:00000000 3F5FC3F6 0013E810 0000:00000000 3F68C3BF 0013E870 0000:00000000 3F6FAE72 0013E8F0 0000:00000000 3F71B631 0013E940 0000:00000000 3F6FAF16 0013E970 0000:00000000 3F6FA31B 0013E9A0 0000:00000000 3F6FA137 0013EA30 0000:00000000 E43BAB2F 0013EA70 0000:00000000 ?NextEvent@wWakeupTime@@UEAAXXZ()+2F F55A76A7 0013EB10 0000:00000000 F55A7AE5 0013EB60 0000:00000000 3F75079A 0013EC70 0000:00000000 3F7522AE 0013EF90 0000:00000000 3F74D219 0013F250 0000:00000000 DBEFDE6A 0013F280 0000:00000000 ?sendOutputSymbol_@FSM@Common@@AEAAXI@Z()+2A DBEFD038 0013F2C0 0000:00000000 ?enterToState_@FSM@Common@@AEAAXI@Z()+C8 DBEFD906 0013F2F0 0000:00000000 ?onSymbol_@FSM@Common@@AEAAXI@Z()+1B6 3F75027F 0013F350 0000:00000000 3F765854 0013F380 0000:00000000 3F765A7B 0013F3B0 0000:00000000 3F80FAAB 0013F420 0000:00000000 3F810306 0013FA40 0000:00000000 3F8133D0 0013FA80 0000:00000000 76F159CD 0013FAB0 0001:000149CD C:\Windows\system32\kernel32.dll BaseThreadInitThunk()+D 7704B981 0013FB00 0001:0002A981 C:\Windows\SYSTEM32\ntdll.dll RtlUserThreadStart()+21

I've just bought the campaign. I hope to see more like this one.

Hi, you can follow this procedure: 1) Move your DCS World folder to the SSD. 2) Create a symbolic link by entering in command line (CMD) and typing: mklink /d old_path new_path For example, if you have DCS in C:\games\dcs and you would like to have it in D:\games\dcs, the command would be: mklink /d c:\games\dcs d:\games\dcs

Hi, In the last version, Options-> Controls, when you select "All" Category and press "Clear category" the system does not clear any assignment. You have to select all the categories, one by one, and press Clear Category to get all the assignments cleared. I hope it could be solved. Thanks.

No probs here. Mine's are CHs and they're programmed by CH Control Manager.

Here you have a customer, wheather you can implement it or not :-)

I updated, uninstalled MiG-21 module, repaired and installed again. I tried a quick mission and no additional activation was used.

Hi, is this problem happening with non-beta version? I didn't upgrade yet.

Many thanks!

Many thanks!

It's one of my favourites too. I'd like to see more post on it.

Do you spend one activation? My problem is when I hesitate to deactivate or nor. Since there was no previous deactivation the only solution is to use a activation, isn't it? Maybe you can uninstall the new module, deactivate, install the new module and reactivate.

No luck here, thanks for your efforts but despite I renamed my Saved Games folder, hints screen is still not appearing. EDITED: Finally I've got it by uninstalling and reinstalling the module.

Thanks a lot, but yours are identical to mine. I'll go on investigating...

Could you please attach me your Hints_page.lua and Hints.lua files located in ..\DCS World\Mods\aircraft\Mi-8MTV2\Cockpit\Scripts?

Thanks for that excellent article. Mi-8 is a fantastic module!

Hi again, my installation is updated and i'm not running multimonitor. I deleted User/saved/.... and it happened the same. Maybe my hints_XXX.lua files are bad. I will try to repair.

Thanks for your check. Do you have the English cockpit mod? Maybe it is due to some change in a lua file.

Ok, thanks for your advice. Better safe by deactivating all my modules previously.

Hi, I tried to remap to a different key and does not work. It is weird as I have the hints option in the special menu activated.

Hi, I can't see the weapons hints information. I have the special option activated. It tried the combination key but it doesn't show. Is it a bug in the current version? It worked flawlessly in Huey. Thanks.

Hi, "Hard drive volume serial number: 3", that means that I clone my hard disk to a new one (for example a SSD) I don't have any need to deactivate? Thanks.

Hi and many thanks for your kind answer and offer for help in TeamSpeak. I have to read your explanation carefully, look at the Crunch profile (because it's using a mixture of Axis and keys for the ministick) and Bob's trick. Count on me if I can help you in some way. Nice flights!

Hi, I'm using the same HOTAS as you: CH Fighterstick, ProThrottle and ProPedals. Could you please tell me which axis and dead zone settings for stick/throttle/pedals are you using? I'm using: Select Ka-50 Real Select Axis Commands Absolute SHKVAL Horizontal Slew set as JOY X of throttle (minstick) Absolute SHKVAL Vertical Slew set as JOY Y of throttle(minstick) Highlight JOY X Click AXIS TUNE and set as follows: Deadzone - 2 Saturation X - 100 Saturation Y - 21 User Curve select and set values as: 0, 10, 20, 20, 20, 23, 23, 27, 30, 50, 100 Do the same for JOY Y for shkval with very good results (it's extremely sensitive with the default settings), but I have a problem with X and Y axis in my stick when pressing the trim button. If I release the stick and let it go to the center, and start to press trim, the diamond starts to move to the right and sometimes go up too. I suppose that DCS detects that my stick is not in the center probably due to some "play" in the center. Thanks.