Hollywood_315

Correct, for ALL TX press/release commands ie TX1-6.

Thanks all for the inputs. So far not reproducible neither in SP nor MP, ICS Hot Mic, AIRIO on/off, Hot Release on/off make no difference. All working normally during testing. That is of course with VA profile cleared of all listening lines, etc. Investigations continue, what I would suggest if you keep having this you may try to remove your Config subfolder restart and report back please thanks.

@PingPongChampeen To open the configuration window, the VAICOM PRO for DCS World profile must be active. @PeneCruz That is by Microsoft recognition engine itself: you could add the word to speech dictionary. @overalien OACS speech volume also refers to DCS volume sliders, perhaps those for 50% levels. @GCBraun This may be of help https://forum.voiceattack.com/smf/index.php?topic=2349.0 @lxsapper Thanks for flagging, we'll have a look a that Countermeasures command.

OK that can be a clue we'll check it.

Ok we'll have a look to see what we can reproduce. Can you test with other modules and test with changing your Release Hot setting. For the F14 can you play with your ICS Hotmic setting. EDIT the log suggests the TX key is released too soon: I'm assuming you are holding it until command finishes. Cheers

Thanks for that log. If not yet done suggest to clean up your VA profile for VA start/stop listening commands (edit the TX commands), first item in the What's New post here: https://forums.eagle.ru/showpost.php?p=4178807&postcount=3782 Then check again thanks.

OK can you share log / screenshot please using debug mode and we'll have a look thanks.

Hi Check if your module is correctly displayed on the DCS page. If not run a DCS Repair, next restart VA before starting DCS again. Re-apply the Custom Path option if needed. Grtz

+++ Release 2.5.15 +++ Plugin version 2.5.15 is out! For existing VAICOM PRO users: there’s quite a few changes and additions in this update. In the User Manual PDF, the changes and additions are marked with a grey sidebar. https://www.vaicompro.com/uploads/7/5/4/3/75436709/vaicom_pro_user_manual.pdf Plugin version 2.5.15 represents a major upgrade in several areas, such as extended support for Multiplayer, SRS and VoiceChat VoIP integrations, inclusion of VSPX advanced speech processing, AOCS unit upgrade, and newly added commands for manual radio tuning. Removing obsolete Listening lines from VA profile Plugin version 2.5.15 now manages all microphone listening states directly. Existing users are advised to go into their VAICOM PRO for DCS World profile and remove all ‘Start/Stop VoiceAttack listening’ lines from ALL the TX press/release commands for TX1-6 (see screenshot). Note: The ‘Execute Plugin‘ line must remain in place! New Multiplayer tab A new MP page was added specifically for managing Multiplayer preferences. Multiplayer support is now moving out of beta and MP server compatibility has been greatly improved. SRS and VoiceChat integrations This area deals with dynamic AI/human multiplayer communications. The integrations in this domain are ultimately aiming for a seamless comms experience in a dynamic mixed human/AI environment, and this is a first step. If you’re into multiplayer comms, make sure to read pages 24-26 of the manual. Note: The VoiceChat integration is available now, the SRS feature will become available in the SRS Client upcoming release version 1.7.3. Props to @Ciribob and the SRS team! :thumbup: VSPX processing option The VAICOM speech processing module has been fully revised to optimise speed and consistency. A new speech processing mode (VSPX, VAICOM Single Pass eXtraction) has been added as a new option, aimed at faster speech processing primarily for players that like to speak fast! No pause between recipient and command, etc. when using VSPX. Check out page 18 for details. AOCS Crystal Palace has now been fully integrated in both Single Player and Multiplayer and can be tuned and contacted like any other AI unit in the mission. Contact Crystal Palace on these frequencies: • AM 071.000 MHz • AM 142.000 MHz • AM 284.000 MHz More on page 21. Manual Radio Tuning Last but not least the VAICOM PRO for DCS World profile now has specific commands for hands-free ad-hoc radio tuning for DCS modules/radios that support this. Use the new profile or -if you prefer- copy the commands over to your current profile: Press Export on the Config page to find the VAICOM PRO for DCS World.vap file containing the new commands in Radio Control category and copy them over to your existing VA profile. Voice command usage: - ‘Select two five zero decimal five’ for 250.500 Mhz, - ‘Select Channel twenty’ for selecting ch20 on compatible radios, etc. For details check the reference tables at the end of the manual. Automatic rollout of the new plugin version will be activated shortly. Grtz Hollywood

Thanks all for your generous comments. I'll be getting back on some of your questions. Cheers

@Thor_H Check the Link to Radio Power setting @RichW AOCS uses Windows text-to-speech, make sure it is set up correctly. @kfarley215 FINISH steps, see manual. Grtz

The plugin doesn't use keystrokes. Check that your setting for F14 Menu in DCS options/Special is set to default. Sent from my SM-G960F using Tapatalk

Audio routing has mostly to do with stuff outside the plugin. Suggest to review the following - Your MS Windows and Audio routing and driver settings - DCS Audio and VR Audio Device settings, audio level sliders, - Enable/Disable Redirect in plugin Audio tab, - Oculus device settings, - Oculus has introduced a new Oculus Virtual Audio Device, disable, To note VAICOM PRO plugin audio is independent of any VA audio. To reduce log entries: in your VA profile you can remove VA Start / Stop listening lines from the TX commands: all listening states are managed from within the plugin these days and these lines have become obsolete.

@Thor_H Use Disable Menus on the preferences tab (you can still access the menus using Options command). @Wolf333 If you want to use a single PTT button for all modules, set your Mode dial on the PTT page to SNGL and choose any TX to bind your button to.

@Evigilant You can already tune radios for any recipient using the Select command. Manual radios tuning (hands-free of course) by freqmod and/or preset channel is planned for addition to generic plugin functionality (i.e. not just AIRIO) in one of the next updates.

Thanks all @Biga42 You'll need to update your VA profile with the FINISH steps, see manual. @Marcel Options/Take commands working fine here, perhaps check if it's mission/module-specific. @fabio.dangelo Well lots of new stuff to test, so for now I'm gonna go with the 'two more weeks' default :D

Greetings all, best wishes for the new year! I'll get back to some of your questions. Exciting new stuff underway in next update (2.5.15) such as much-improved MP server compatibility, new MP integrations for dynamic VC/SRS PTT, a revised speech processing algorithm allowing faster speech with higher recognition rates, revised AOCS function and numerous minor tweaks and fixes. Stay tuned :pilotfly: @Biga Consolidate commands and make sure VA runs as administrator. @FALT691 JF-17 Early Access is not on the list of plugin supported modules at this time. https://www.vaicompro.com/features.html We'll have a look to see if we can reproduce anything with the J-11. @slicker55 No worries thanks for updating @huppel To contact JTAC use 'Playtime 20 minutes' etc. see ref. tables. @sniperpr1 Check @stuartaston's nice table, you can also export to .csv with the Editor Export button.

@tapi Upcoming update 2.5.15 is planned to have major additions in the area of MP e.g. dynamic integrations with VoiceChat and SimpleRadio. I'm looking into it now together with Ciribob from SRS. Goal will be to provide a seamless AI/human comms setup using just VAICOM's TX nodes for PTT. Stay tuned for the new year! Grtz Sent from my SM-G960F using Tapatalk

Build 2.5.14.1 is up: - Hotfix for .vap files. Grtz

Thanks we'll have a look and get out a fix, it's probably some VA version conflict thing. Grtz

+++ Release 2.5.14 +++ Plugin 2.5.14 with AIRIO 2.5.6 is out. Merry Christmas! Hollywood VAICOM PRO plugin update: release 2.5.14 - New PTT hot release function (page 27). - Audio now follows external view setting. - Numerous fixes and improvements. - Hosting update for AIRIO 2.5.6 AIRIO 2.5.6 - NAVGRID functionality added (apply FINISH steps). - New command for Map Markers to NAVGRID (import command first, page 36). - AIRIO now auto-disabled when VA not running. - Various tweaks and fixes. Existing users update automatically.

Thanks mate - appreciated. Same results here, all looking fine. Catch me on PM if you need more help with anything. Grtz

@Japo32 Extensive testing has brought to light no reproducible conflicts with SRS or any other 3rd party apps at this time. The plugin is clear to run on VA 1.8.2, for DCS Release and OB alongside SSA, TacView and SRS all latest versions. Testing has been done for any order of entries in export.lua. If you experience issues you may want to re-inspect your SRS setup, also suggest to try out different mic and output device settings to see if any conflicts arise there. @sSkullZnBoneZz Try with running a DCS Repair and if needed reset your Custom Path dir. @tapi PTT hot release feature to work with daisy-chained VA profiles is part of upcoming plugin release update 2.5.14.

@D3adCy11nd3r You already mentioned this and you already had a response. I said it will be looked into. Sent from my SM-G960F using Tapatalk

@sniperpr1 You seem not to have read my PM. Your problem is basic install, different from the others. Have a look at the PM and reply if you need more help thanks.