Jump to content

Vize

Members
  • Posts

    62
  • Joined

  • Last visited

Everything posted by Vize

  1. Last night on the VA-server. Some of you might know a movie called Top Gun ;-) Greetings from Germany Andreas
  2. Was mir auffällt ist, du schreibst: "Mein linkes Triebwerk liegt auf Lalt+Home (bzw Z), das rechte auf Ralt+Home (bzw X)" Kann es sein dass es an der Doppelbelegung hakt? Hast du denn mal probiert, die Triebwerke mit der "Normalkonfiguration" zu starten, siehe post von mwd2? Bin mir nicht ganz sicher, aber wenn du die Ordner unter Benutzer/Gespeicherte Spiele/DCS... löscht, werden die beim nächsten Start mit der Standardbelegung neu angelegt. Dann könntest du zumindest mal die Standadrkonfiguration testen. Gruß Andreas
  3. Hi ENO, as chatted a few hours ago, I had problems with the tower freq of Anapa. My map showed 141Mhz, others told me it's 121Mhz. Finally i got response on 121Mhz. Any clue/solution so far? BTW I run the german version of World/A10-C. EDIT: DCS_VAD_Charts_A10C says 121Mhz for Anapa and 141Mhz for Beslan. My ingame map (F10) shows group Beslan for Anapa ?!?! Strange... Andreas
  4. Hi, it's "AltGr+Home" for left engine and "rCtrl+Home" for right engine. Greets Andreas
  5. ...and what about the trees growing through the roof of the neighbours flat...? Andreas
  6. Air refueling last night on the Virtual Aerobatic Server with two F15s joining up. After my third attempt the boom perforated my canopy... Result: Pilot dead... BTW: How do i paste pictures directly into the post (not as an attachment)? Greets Andreas
  7. I can copy that. Saw similar lines last night in an online flight. But only once for a few seconds. Greets Andreas
  8. Vize

    JTAC

    So that's the difference between real life and simulation. In real life the heading is important, in our DCS:A10C simulation it is not. Wrong heading for an attack run never leads to an "abort, abort" by JTAC... Andreas
  9. Vize

    JTAC

    Hi, the heading for your attack is not important. It's important to follow the communication tasks step by step, like ip inbound, laser spot, etc...so check your radio menu for what you have to tell him next... Andreas
  10. Was sind denn das für "Missionen", die du fliegen möchtest? Singleplayer, Multiplayer, von DCS mitgelieferte Missionen, eigene Missionen, ...? Gruß Andreas
  11. No problem, Lubos... Just wanted to give you an updated feedback. Greets Andreas
  12. Hi Lubos, updated to beta 0.4, but the "offset-issue" for the CDU is still present...for example i have to press "A" to get a "G" and so on... Funny thing about my Acer A200: Acer specs say 1280x800 pixel for native display resolution, but inside your app it says 1176x800 ?!? Greets Andreas
  13. Hi, a quote from colo's requirements: HW - Android device with Android version > 4.0 with reasonable display size (about 7") HW - separate PC monitor for displaying MFCDs and/or CDU (graphics card with minimum dualhead support) For me it only works with second monitor on. But maybe i'm too dumb to get it running with only one monitor... Perhaps colo can give us the proper informations... Greets Andreas
  14. Hi, na dann belass ich es wohl beim reinen Bildschirmtreiber ohne CCC. Scheint ja keinen "Vorteil" zu bringen, das Ding... Gruß Andreas
  15. Hi, downloaded and tested it. Nice work! After having some trouble setting it up - missed to turn on my 2nd monitor in Windows and missed to deselect fullscreen in game :music_whistling: - it works quite fine. What I've noticed: Sometimes there's an input lag of about a second and on my device (Acer Iconia A200) the buttons are, let's say, a bit off of their position - i have to press a bit above of the buttons to get the input... Greets Andreas
  16. Moin, mal ne banale Frage, reicht es eigentlich aus, nur den Catalyst-Bildschirmtreiber zu installieren, oder bringt das Control Center noch Einstellungen mit, die zu mehr Leistung führen (könnten)? PS: Der BetaTreiber 13.10 brachte bei mir keine Verbesserung zur Vorgängerversion (13.04) - an anderer Stelle wird hier ja berichtet, dass der neue Treiber für manche ca. 10 FPS mehr bringt... Gruß Andreas
  17. Vize

    Polygone statt Feuer

    Hi David, das wars! Hatte versehentlich eine angepasste graphics.lua aus der 1.2.4er Version genutzt. Mit der neuen sieht es wieder vernünftig aus... Danke für die schnelle Hilfe! Gruß Andreas
  18. Hi, ich weiß, dass das irgendwo schonmal angesprochen wurde, aber ich finde es nicht mehr über die SuFu... Jedenfall sieht die "Feuerfahne" abgeschossener Flugzeuge seit heute (eben frisches update eingespielt) wie im Anhang aus. Gibt/gab es dazu ne Lösung/Hilfe? Gruß Andreas
  19. Hi Groove, ich besitze nur das A-10C Modul, daher kann ich auch nur darüber berichten... Jedenfalls bin ich aktuell die SinglePlayer Mission Khashuri geflogen und habe dort nur Bodenziele bekämpft. Die Anzahl der durch mich zerstörten Ziele wurde dabei nicht unter meinen Abschüssen gezählt... Gleiches Szenario, wenn ich eine MultiPlayer Mission (z.B. die JTAC-Übungsmission von =STP=Dragon) fliege. EDIT: Erzielte Punkte werden ebenfalls nicht im Debriefing angezeigt...im Logbuch aber (passend?) addiert... Gruß Andreas
  20. Hallo zusammen, könntet ihr vielleicht bitte mal folgendes verifizieren: A-10C seit 1.2.5 werden die eigenen Abschüsse nicht mehr im Debriefing zur Mission angezeigt, es steht dort dann immer eine 0. Abschüsse stehen nur noch bei "Alle", also eigene und die von Flügelmännern etc. in Summe. Im Logbuch werden die eigenen Abschüsse aber weiter brav addiert. Gruß Andreas
  21. Hi Ricardo, had the same "luck" by colliding with a tanker while air refuleing. Tanker crashed into ground...all points gone. Maybe you could edit this file to "restore" points: users\[name]\SavedGames\DCS\MissionEditor\logbook.lua greets Andreas
  22. Hi, in which file do you find these lines? I've noticed the same flying the A-10C. Debriefing of the mission says zero kills at all for me, although i shot three AAAs. But logbook in the main menu says three agKills... Andreas
  23. When the engine has been on fire and you pulled the T-handle and you used the extinguisher, don't forget to push the T-handle back in before starting the engine. Otherwise it won't work... Andreas
  24. You could give this a try: http://forums.eagle.ru/showpost.php?p=1759256&postcount=58 Andreas
  25. Vize

    Punkte im Logbuch

    Hallo zusammen, mal ne Frage/Beobachtung zum Logbuch. Wenn ich mir die Wiederholung einer selbstgeflogenen Mission anschaue, werden die Punkte nach dem Anschauen zu meinen (ordentlich) erflogenen addiert. Das ist doch eigentlich nicht in Ordnung, oder? Oder liegt es wohl daran, dass ich das hier nutze: http://forums.eagle.ru/showpost.php?p=1759256&postcount=58 Gruß Andreas
×
×
  • Create New...