linden

Its 3mm Board..

Skin is on the way...

Thanks avlolga!

Thanks !!

And the SAS panel

Im gonna use the Phidgets LED-64 Advanced LED Controller, http://clcsystems.nordicshops.com/product.html?product_id=149

Nice work!!

Sad story: I did remake your drawing to fit 18mm, every cutout and part was remade. Then i send it off the and waited..... When i got the parts i was not to happy whit the result, so i whent back to the mail that i have sent , and ther its was..... THE ORIGNAL DRAWING!!!! :doh: I have send the wrong drawing:mad: But i will use this left side,because the material and laser is very expensive.... I will use some steel corner brackets to firm it up better... Next time im gonna try to remember to use the right drawings:)

Its birch trees "plyfa" 18mm a very hard and good material, the maskin that cut it is a Elcede LCS-300-4TR it has a watt from 1000 to 2500.

Progress....

Here is the left side of y2kiah stencil cut whit laser. Just need to remove the part from the sheet.

Panel Update Caution Panel

Panel update SAS Panel.

Nice Work:thumbup:

I'm glad you liked it! :) By the way, I have now fixed the holes in the fuel panel:) I used the mill at work so now the oval holes is milled 3mm down from the backside... Looks really good now!!

Thanks Deadman

Thanks Duckling.

Yes im very pleased with the panels. The switches are 3mm lower then the ones that has round holes, no big deal. I can always drill from the backside 3mm down, but no need for that.

Yes i will have light that will be one lamp from behind the backplate. As for the wiring i dont think that will be a problem, but i havent tested whit wiring, so i dont know if there will be a problem. If so i need to get a el sheet or just put some leds in the backplate.

Here are the individual parts. The backlight is not on, i will backlight the panels whit one lamp each.

Thanks avlolga:)

I want to start this thread by saying THANK YOU to everyone here on the forum who share infomation, construction techniques, and designs for panels and cockpit. Too many names to write but you know who you are, thanks for a great job! What I have done now so far is AUX and Fuel panel. The material that I have chosen to use is 2mm clear plexi for the backplate, 3mm opal-white plexi for lightpanel, 5mm opal-white plexi painted with black color then laser engraved. Still need to paint the backplate "edges" Well its a start :) Links to sites where i got the parts Fuel Panel: 9 http://www.conrad.se/?websale7=conrad-swe%3b01-aa&pi=701037&act=load_tpl&tpl=01-aa/tpl_read_prod_rating.htm&ws_tp1=nl&ref=reviewreminder/701037 1 http://www.conrad.se/MINIATURE-PUSHBUTTON-RED-TYPEBNO.htm?websale7=conrad-swe&pi=705063&ci=SHOP_AREA_17384_0216610&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E%20705063%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/32c372a197637c3f1d80eff10cc7b527/md5} 4 http://www.blueride.se/pushpull-switch-p-1110.html?cPath=121_28_125 1 http://www.conrad.se/POTENTIOMETER-16S-W4B8L30-10KLIN.htm?websale7=conrad-swe&pi=449896&ci=SHOP_AREA_17440_0241710&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E449896%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/3f19f1def4dd90c5aef95253c0b869ea/md5} Aux Panel 2 http://www.conrad.se/POTENTIOMETER-16S-W4B8L30-10KLIN.htm?websale7=conrad-swe&pi=449896&ci=SHOP_AREA_17440_0241710&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E449896%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/3f19f1def4dd90c5aef95253c0b869ea/md5} 2 http://www.conrad.se/MINIATURE-PUSHBUTTON-RED-TYPEBNO.htm?websale7=conrad-swe&pi=705063&ci=SHOP_AREA_17384_0216610&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E%20705063%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/32c372a197637c3f1d80eff10cc7b527/md5} 1 http://www.conrad.se/?websale7=conrad-swe%3b01-aa&pi=701037&act=load_tpl&tpl=01-aa/tpl_read_prod_rating.htm&ws_tp1=nl&ref=reviewreminder/701037 1 http://www.conrad.se/VIPPBRYTARE-G%c4NGAD-BUSSNING-1-PLOIG-11.9MM.htm?websale7=conrad-swe&pi=700101&ci=SHOP_AREA_17385_0216100&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E700101%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/148fd8fe5a363a6479b65d0c77491e59/md5} SAS Panel 4 http://www.conrad.se/?websale7=conrad-swe%3b01-aa&pi=701037&act=load_tpl&tpl=01-aa/tpl_read_prod_rating.htm&ws_tp1=nl&ref=reviewreminder/701037 1 http://www.conrad.se/POTENTIOMETER-RK09L1220-10KBX2.htm?websale7=conrad-swe&pi=441789&ci=SHOP_AREA_17440_0241710 1 http://www.conrad.se/MINIATURE-PUSHBUTTON-RED-TYPEBNO.htm?websale7=conrad-swe&pi=705063&ci=SHOP_AREA_17384_0216610&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E%20705063%3C/s1%3E/sf}{p1/51e3d833cc6ed78fbdcb3dd719572348/p1}{md5/32c372a197637c3f1d80eff10cc7b527/md5} 1 http://www.electrokit.com/vippomkopplare-med-skylt-on-off-on-2pol.47040 Elec Pwr 5 http://www.conrad.se/VIPPBRYTARE-R13-37C-05.htm?websale7=conrad-swe&pi=701037&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E701037-I5%3C/s1%3E/sf}{p1/0d7e3b76f5dec8728f6775c148801294/p1}{md5/24f75cb4ac8dbe656769bb73234b9f47/md5} 1 http://www.conrad.se/TOGGLE-SW.C3921BEAAA-IP67-E-A-T-10%284%29A.htm?websale7=conrad-swe&pi=701423&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E701423-I5%3C/s1%3E/sf}{p1/0d7e3b76f5dec8728f6775c148801294/p1}{md5/94e887a978c2e598c94f1c0544ffd97f/md5} Stall 2 http://www.conrad.se/POTENTIOMETER-16S-W4B8L30-10KLIN.htm?websale7=conrad-swe&pi=449896&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E449896-I5%3C/s1%3E/sf}{p1/0d7e3b76f5dec8728f6775c148801294/p1}{md5/0f29e6631e4de6b807d62818ed5f0ce5/md5} Nav 2 http://www.conrad.se/VIPPBRYTARE-R13-37C-05.htm?websale7=conrad-swe&pi=701037&Ctx={ver/7/ver}{st/3ec/st}{cmd/0/cmd}{m/websale/m}{s/conrad-swe/s}{l/01-aa/l}{sf/%3Cs1%3E701037-I5%3C/s1%3E/sf}{p1/0d7e3b76f5dec8728f6775c148801294/p1}{md5/24f75cb4ac8dbe656769bb73234b9f47/md5} 2 http://www.opencockpits.com/catalog/positions-rotary-switch-p-155.html?cPath=24_55 1 https://www.elfa.se/elfa3~se_sv/elfa/init.do?item=35-223-52&toc=20340

More plans:).. sounds good!! Do you know how many sheet the cockpit will need? Thanks for the hard work!! /David

Nice work!!

i will also be interested in a full set knobs, count me in. If you need some advance payment just let me know. Thanks!!