R-22

Sounds Very Similar to my post of ODD Unexplained Behaviour. Hope You get some sort of Solution/Answer.

Situation = I Was in the F15-C 30K@M1.1 with 2 J11-A hot at 36K@ M1.6 60NM, this is about 90 minutes into a mission. I go PRF-High, TWS-On, Lock Bandit, & turn to put the Rear one on the Outer Gimble Limit. Player Wingman is targeting the Leader. High Closure speed, ready to Launch "Charlie" @ 30Nm. Radar Lost contact, display goes Blank, about 5sec later contact shows up. I Lock it & about to turn in when Poof Gone again. This happened about 4 times consecutively in this engagement. My Wingman's shot was Trashed but with my head-Locked to the Radar with the "LOCK & Lose Contact" I ended up taking a 27ET from the Red-Lead. I looked at the Tacview it showed No Beaming. In Cockpit I never got a Jammer Active signal. COULD this be Related to the new F16 ECM pod update? That have somehow migrated into other aircraft ECM's. Not the greatest at explaining but hope you have enough to work with. I tried to make a Track for you but after 10minutes of blue spinning disc I surrendered. I have the Tacview if that would help.

Hey Pauldy: I enjoy flying the 15 quite often & have asked this very question, without a valid response. The F15 even has a "TO trim" button, which is nice for Smooth Take Off's but when you let go of it "good luck" with normal straight flight. I understand exactly what Your asking (If the TRIM don't WORK properly why do we have Buttons to Activate/Control it)? I have even tried several combinations using the "CAS" Computer Augmentation Switches, as yet All to no success. I too would like some Insight into this Issue. Until then I'll continue to NEVER use TRIM in the F15-C.

I would like to add to your Question. 1-Resize so it's semi visual in a Video. 2-Thicker lines same reason as above. 3-Color Change same reason as above or just for Contrast. Currently it's pretty small for someone to follow the Inputs & Watch the Screen.

Hi Throggy & a big welcome to DCS. Have a look at the TAW_NA servers, Were on Holiday schedule right now. Not recruiting until the new year but stop by & say Hi. Discord & Website info I believe is in the server notes.

I have landed other fighters and none give me problems except for the F-15. Landing the bird is not the problem, keeping it on the runway after landing is giving me headaches. What am I doing wrong?? Not much to go on here but I will take a Stab at it. With "Flaps & Gear DOWN" using the lowest approach angle possible. At Threshold Flare & Maintain 22 AOA while reducing speed. On rollout keep the Nose at 22AOA & use your RUDDER to Steer. When rolling speed drops below 100Kts the Nose will Drop, only now use Steering & Brakes. Airbrake as you see fit. Depending on Weight your Landing speed, 150Kts Light or 180Kts Heavy. Don't forget the F15-C has Brittle Landing Gear, so SMOOTH is a Premium or Bent & Broken "Gear&Tires" will follow. Good Luck & Hope this Helps.

Hi Hunter & TKX for the Mission Post. Never would have found out without it. 1- Waypoint Speed is 11, change to 0. 2-Advanced Waypoint - Options - ROE - "set to" WEAPONs FREE. I tested with an F15, It took 5 min before it registered on the RWR & Fired. Hope this Helps.

If you were moving Sam-Units around, perhaps part of the unit is not close enough to the others. OR check & make sure the Unit-Template has not been changed to a Static UNIT.

Hunter:Looks like your doing it right. I'm going out on a limb here but did your trouble start with the last Update?

I did get your message but I couldn't attach the Pic. Let me know if you need more Info.

I hope this will explain it for you. I'm just across the RIVER if you need more Help.

Hi buzz: are you comfortable using "Trigger Zones" & "Setting Triggers"?

TKS Rudel: Quick Reply I will check out the links. Yes I am trying to make rather specific Training Missions. That's why I prefer the Default ME.

Task Only applies to the Unit you selected. Depending on the Bird you selected the Tasks are limited to the Air-frame. An A10's Task cannot be AWACS. What specifically are you trying to do?

Long Story Short: Is there such a thing as an ADVANCED ME-Manual. NOT the user manual with the mission editor basics. (NOT Moose, Mist, CTLD etc.). NOT someone's website (HIT or read forever = MISS) but an actual PDF. I'm looking for an ADVANCE ME Manual to use with Default ME. It should have a basic explanation of say for instance: X: Set Command (816). To tell me what the command for 816 is? Stuff like that. Does such a Manual exist? Can I get a link to it? TKX for your time reading this Gents.

TKX for all the INPUT. After several Hrs. of READING & trials & Testing. Then Reading other posts here & trial's. I finally decided to try it all again. Unistalled World & Saitek/Logitech. Removed all Trace files, Then Reinstalled them Both. It's working now. "wish I could have isolated the problem" Once again TKX for your Help.

TKX Svsmokey: I will look into that on the weekend. You know how that work thing gets in the way.

Svsmokey: I tried Clear & Reset to Default several times = No Joy. Guy7: I have searched for SST v7 = No Joy. The Saitek site has Ver8 the same as the Logitech site. I know there is an Archive of the files but my search has proved worthless. Can someone provide a "working addy" for the archived files? TKX for the replies, gotta figure this issue out.

Hello All: I just built my new Computer. Win 10-64,Zen-5, X470 mb, 16G@3200, 1070ti, 500G-SSD for gaming. Very Happy to retire my XP, C2D-8600, 775mb, 4G, 750G platter. Been playing FC-2 for years on & off, very frustrating with my old system. So now I have a capable system, DCS has an Autumn Sale. "HEY GREAT", I'll buy myself a bunch of modules & get to work on having some fun. "Not so Much" so I plug in my X52 pro & dl Win 10 Drivers ver. 8.0.121.0 & SST ver. 8.0.213.0. I ran Win 10 { joy.cpl } to test her out, all Buttons Working & Axis Calibrated. Then I dl DCS World 2.5.3 & spent a lot of time "in Controls Menu" attempting to Map my X52 pro. in Game. Here is where the problems started. ie: Mode Switch's not recognised, Mouse on Throttle not recognised, could only map 1-Modifier the pinky-shift. OK so it's not the end of the world. I'll program everything into the SST-software & go that way. After quite a while of entering all the Su-25T button presses, I assign all buttons where I want them. Save "Su-25T" the profile, the Pitch, Roll, Yaw & Throttle were programed in Game, Axis Curves adjusted. Lets fire this puppy up & get this game rolling. The Flight controls "Axis" were all over the place, the stick buttons didn't work either. So I'm a smoking Hole in the dirt. Not the First Time for that but "WTF"? Is there a problem with DCS 2.5.3 or the Logitech Drivers & Software? I guess I'll have to wait for the next "Sale" before I can BUY some Modules. Let me Know if there's a SECRET setting somewhere that I'm not aware of. TKX

I'm no expert but I do remember the Training missions are a Download separate from the game. The Missions I would suggest you Open them in the EDITOR & check that the planes are set to PLAYER. Other than that I think you will have to Re-Download & Register.

It Works, Many TKX Cichlidfan.

Cichlid = I'm not in a hurry, I'm just glad you could Help. The Editor in the game works, so I have been getting use to it. Not that I can check the TIMING at all, it won't even let me watch.

That would be Great. My 40 Cardinals would Appreciate it Cichlid.

I thought i was kinda WONKY what they suggested. 1-someone not playing the game won't be reading in this forum. 2-if it's not for sale, why not release the activation security? Thanks for getting back to me, I did read about the Activation security & really didn't think this request would FLY. Too Bad Looks like a nice SIM.

Edited for a better explanation. I have downloaded & Installed it BUT ACTIVATION is a problem. I tried to BUY FC2, without success. I E-Mailed them about the VISA not working and the response said "We no Longer sell FC2". Was also Advised that Maybe someone from the FORUM could Provide Me with the Activation-CODE. My Machine is XP & meets the Hardware requirements. I can't afford to Upgrade High enough for the DCS series right Now. I'm no Freeloader! Just want to get back in touch with Flight Sim. Can forward the E-Mail Response from Support@Eagle.R.U. if it would help. TKX for the reply GOLF.