Jump to content

Kinslayer

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by Kinslayer

  1. Tnx for the quick reply, took a couple of days before i had time to test it. You are absolutely right, i somehow missed this step. Got the station in now. Tnx!
  2. Hey guys, awsome mod! It's amazing how much effort went into this already and to see what is possible for DCS but misssing unless you have this mod. Cargo dropping, stuff you load in actualy showing up, paratroopers, etc. I do have a questions: I watched some vids on how to operate the hercules and i see a battlepanel on the loadmaster (3) station where you can arm the bombs. I do get the loadchart where i can flick threw some information. I however do not see the weapon armament controls, nor am i able to drop bombs or fire canons. I looked around on the forum, but couldnt find an answer. What am i missing? I am in VR, dont know if that could be a problem? I uploaded a picture of the panel im refering to
  3. Hey guys, beside all already named functions to bind to our expensive Hotas sets ;-) I ran into another problem in this category: I use Grizlies Warthog profile for the Warthog in T.A.R.G.E.T. This allows me to use the warthog bindings in all states (forward, back and center). This works in all planes except the JF17. I cannot bind any controls to my virtual device (which is in fact my throttle running through target) They are simply all blacked out. Could you please open al bindings and axis for the virtual device?
  4. Awsome, thanks for the quick response guys. 1 more question @rudel: where did you find that info on the cc's nav suite? I couldnt find it. Apreciated!
  5. Hey Guys, Just got this jet and i love the attention to the small details, like the Generator and connection actually showing up, the ladders, the helmets next to then, the map in the mapbox, etc. I have two things i cant figure out though: 1 is with the aircraft: While diving my 'Tran' (i understand it means gear) caution sometimes lights up. cancelling the caution does not cancel the audio warning. Why is this alarm going of and how do i avoid it? (gear is up) 2. What do i name the kneeboard folder? (or is this not yet a feature) I tried c-101 and c101cc but cant seem to create custom kneeboard pages. Tnx!
  6. I understand this, if you use a wheel as axis, I use the slider on my warthog and might as well assign it to a button since it has the same effect now. Since not everyone has an actual fa18 hotas or a scroll wheel (for which it would make more sense) it would be nice if both would be an option. Referring to the real hornet doesn't realy help if you don't have the actual stick and throttle.
  7. Daar devs, Despite the latest release notes claiming this campaign is fixed, i stil experience this problem. Hope you can fix this Regards
  8. At the start of this mission the flight (102) lead creeps forward real slow, decending a bit, eventualy hitting the farp with his tale. I saw a few bits comming off. Then he flies off as aspected. After strafing the units firing on the downed pilot 102 gives a 'they are supressed' message, and he asks me to cover him while he lands to pick up the soldier. He makes his approach and when he is about 20 - 40 meters above the ground he starts gaining some altitude again. After this he enters a loop where he keeps ascending and descending, but never landing. I've tried flying around, landing next to the soldier after killing all the enemy troops, fast forward, but it changed nothing. Since i cant actualy pick up the downed pilot, i cant continue the mission.
  9. Keep up the good fight drex! Loving ur server. Since blueflag and open conflict stopped because of all these issues urs is the only one that provides a teamwork experience, and that is what mp is all about for me! Keep dcs mp Alive ;-)
  10. If anyone is having the same problem i had, see the post by Pacman here for the sollution! Be aware though, DCS will recognise both the virtual throttle as the actual, so be sure to unbind the actual throttle @Gizzy it is not your profile, its the thrustmaster software. http://forum.teamspeak.com/threads/128245-conflict-with-target-gui-from-thrusmaster
  11. Tnx for the quick respond :-) In the analyser all is well. When trying to set it as enable/disable mic mute (so it mutes teamspeak when i talk on Simpleradio) it either reads button 2, but doesnt close the input windows (ie when pressing escape to exit my hotkey says button 2 + esc) or it reads all buttons on the throttle at once (not just the mic). I also have to reset the gamepad/joystick ad on and not touch any buttons until i get to the input window or it wont read any key at all. SR does recognise the key just fine and i hear it clicking while i try to input it in TS, so i guess its a TS problem. TS doesnt read any other button on the throttle either. Ill do some more trying, maybe try reinstalling TS. Thanks for taking the time to check it out
  12. Gizzy i absolutely love your profile! Just got the warthog and was a bit confused the buttons only had 1 state in DCS, but your profile cleared it right up :-) I have one issue: I cant get button 2 (mic switch push) bound to teamspeak when the profile is running. Without target it works, but it wont recognise the bound switch while running the profile. (2nd part of that makes sense) Do you have a fix for that?
  13. Old post, but thanks a lot :-) Im not technical at all, but this was an easy fix. 15 minutes and it works fine again :)
  14. I tried a restart of my PC after changing the pagefile (should have thought of that sooner) and i am currently online Looking at a beautifull KA50 on High settings! Thank you very much! I hope this fix will last :D :thumbup::thumbup::thumbup:
  15. Yes, the drivers are up to date. I had to google to find the page file setting, never heard of that before XD. It was not set to system managed. Should it be? Did a test run with it set on system managed. Still crashes.
  16. Thank you for your reaction :thumbup: I tried uploading the crash/log file, but it says its an invalid attachment. EDIT1 . u asked to zip it, ill attach it to this message in a bit. Edit 2. Added Bitdefender never gave me trouble on DCS, but i added it to the firewall exeptions to be sure. Logs.zip
  17. Hi all, I have been trying to fix my DCS, but i cant get it to work. I realy need some help. I've been playing for a couple of months now, finaly got some headtracking gear, and am anxious to get back in it. I have installed the base game, FC3 and KA50. will get the a10c or m2000 (not sure yet) on the next flash sale. My Geforce 760 didnt realy like the game though and with bf1 comming up as well i decided to upgrade. I got an Geforce 1060 MSI Gaming X and a new SSD 500GB hard disk. After installing i just pressed High settings, even upped tree/preload a bit and it ran like a charm. Absolutly beautifful sights compared to the lowest settings i had previously played on. After a videocard test i uninstalled DCS and reinstalled it on my SSD. (It was previously on a 'normal' hard disc. (my system is running on a 250gb SSD, so in total 3 hdd) Since that moment loading times got much better, however the game crashes on, or just before te 'select role' screen. I turnt the graphics back to medium, but no luck there. Sometimes it just crashes and shuts down, sometimes i get a 'DCS stopped working' message, sometimes i get a message it was shut down due to a shortage of memory (i have 8gb, and taskmanager puts usage at around 65/70 %) and sometimes my pc actualy freezes and i need to turn it off using the on/of button. ( I once saw 100% processor usage) I havent seen a PC freeze completly in years :-( I uninstalled DCS again, since i found it rememberd all my settings, and deleted the files in the 'users' directory. Clean reinstall (can do my controlls all over again :( ), but the problem persists. It seemed to be fine at 1st on the new graphicscard and i can run farcry 4 and rainbow 6 siege on ultra/high settings just fine. The monitoring software says my HDD is in a good state too. I tried without the opentrack plug-in to see if that was the problem, but i still crash. On the lowest setting it sometimes works and sometimes crashes. I am realy frustrated right now and just want to get in to the game. I realy hope someone can help me out. I tried adding 2 crashlogs, but they dont seem to upload. System: Windows 10 64x I5-4670K processor 8GB ram Geforce 1060 Gaming X Samsung EVO 250 GB + Evo 500 GB + 2 TB regular hdd Resolution 1060*1050 Bitdefender anti virus
×
×
  • Create New...