hornblower793

While I don't normally use the function, I have just tested and got the Huey dial to move after a command is issued when Dial Oper is selected. I cannot help with SRS as I don't have it

If JTAC doesn't work try the callsign of your JTAC

JTAC and Crystal Palace

There are two radios - TX1 is showing the ARC-182 and TX2 is the ARC-159 in my VAICOM config once I am in mission. It is the second of these that is tuned to the George Washington, while the other is tuned to 124Mhz which is the frequency for Krymsk ATC. I would guess you have therefore used TX1 instead of TX2. I haven't flown the F-14 recently so can't remember if these used to come up the other way

Does it respond correctly if you use the Vaicom Options command followed by 'Take ' to use the DCS comms menu? Will try the mission after work today Away from PC - sent using Tapatalk

This is a bit harsh - I had no problems interpreting what was meant although an explicit statement about SP would have helped. Away from PC - sent using Tapatalk

Great - in the future you don't need to copy Export.lua before deleting it unless you also use Tacview or SRS

Copy the export.lua in your saved games folder and then delete export.lua. Close and then restart VA / Vaicom and then DCS

Are the Show commands in the VA list of commands (the pencil icon next to the profile name in the VA main screen and not the VAICOM config list)? It sounds like they are not in there. If not, then you need to go into VAICOM config, hit the FINISH button on the Editor tab and follow the instructions

Try the following (I have set the VAICOM option so I do not need to say Page to switch between them) Chief = Ref tab ATC, Air Traffic Control or an airfield name = ATC tab (ATC is the least reliable of these for me) Show Log or Show Tasking Order will bring up the ATO page

I have just tried it with the Tomcat on the supercarrier deck and used ATC, Air Traffic Control and George Washington to get the ATC tab up, but it didn't appear 100% of the time and I needed to remember to release and the press the PTT button between each attempt

It is there, but as a very small set of downward arrows to the left of the thread title Away from PC - sent using Tapatalk

I have just set up a simple mission with the A10-C II and Darkstar - it works fine for me and the 9 line / remarks to the kneeboard is fantastic. Can't wait to try this in VR later

Agreed - most of my forum is showing as last posted yesterday

@BIGNEWY is aware of this and has fed it back to the site admin

@Drac - no problem. Just to be clear I am an ordinary user - @Hollywood_315 is the genius behind Vaicom:)

Do you have custom aliases in your profile - if so, and you have reset Vaicom these might now be missing from the main set. If everything appears to be working fine and the Test button says that the Vaicom and VA lists match I wouldn't worry about it. Away from PC - sent using Tapatalk

OK - I am running that way as well. To move to a tab I push a TX, say the name of the tab (e.g. JTAC or AWACS) and it then moves to that tab. This will not work for Notes or the Briefing tab where you have to use a command of the form Show...Notes For some of the other tabs you can use the following Chief = Ref tab Air Traffic Control or an airfield name = ATC tab Tanker or a tanker callsign = AAR tab Crystal Palace = AOCS tab If this doesn't work, are you running Easy Comms on or off and which airframe are you trying it in?

How are you trying to move between the tabs? Is the Auto Browse checkbox bottom right of the EX tab in VAICOM Config checked or unchecked?

ATC for land based does appear - will try carrier later Away from PC - sent using Tapatalk

I have just tried this map as well without stutters (in VR) so it will be interesting to see what the cause is

I have just had a quick test flight and haven't noticed this - will try in more depth later

Glad you did it - a short extension is definitely worth it - even the 5cm extension I have makes a lot of difference to the level of control - it also allows you to easily adjust the rotation of the grip on the base

I have both long and short Monstertech mounts, and have a Warthog grip - used to be on the Thrustmaster base with a 10cm extension, but now on a VPC WarBRD base with a 5cm extension. The longer mount is definitely worth it for me, with my dual office / gaming setup being the limiting factor on how low I can mount the stick. The mount is just below the level I could achieve with the short mount - I ideally wanted a bit lower but compromised to maintain a setup which allows me to reach my pedals without having to re-arrange the furniture each time I change from work to play. Can send you some pictures if you like, but have also found Monstertech to be incredibly helpful, so if you wanted a length between the short and long mounts they might well be able to do for you. Their mounts are really good quality and happy to post some photos of my setup if that will help you

No - post in the Heatblur thread earlier today explaining this should now be coming on the 18th November with the release of the F-14A Having said this, there is another post from @IronMike saying the AIM-54 guidance changes are in and asking for feedback on this as it is not fully tested (https://forums.eagle.ru/forum/english/licensed-third-party-projects/heatblur-simulations/dcs-f-14a-b/7126386-aim-54-changes-new-api-fixes-are-live-in-today-s-patch#post7126386)