KAMOV

Good evening Strut, I think that's possible, but it should be added to the list of coalition (ED has added ITALY in DCS WORLD)

Hi beczl,why do not you do an MTP-LB ? =>http://worldwide-defence.blogspot.fr/2011/12/mtp-lb-tracked-maintenance-vehicle-nva.html

Hi Alls the MOD Hello to all, the Cougar TM is a very good Joystick, but as some have noticed him he suffers some defects Citation: The defects of the ancestor (how not to repeat the mistakes of the past). Despite a level of quality rarely matched the time the Cougar was victim of errors of design and production: • Evil material adapted to the repeated stress which resulted over time in the stick game • Sometimes perfectible Assembly which provoked case parts • A system of slew (cursor radar device) difficult to exploitable…. • Potentiometers to squirt or making the soul prematurely...... Aware of its responsibilities the Thrustmaster SAV was excellent for the problems of parts As I l have pointed out, one of its default is (inevitable with time) mechanical potentiometers fouling more these potentiometers are almost not found (even if the Thrustmaster SAV is competent) he is to strong a bet qu with time have will be more, I am therefore reviewed the case of the Tm Cougar potentiometers and I noticed that the only viable solution was to delete contacts between parts moving and therefore replace the potentiometer by Hall effect sensors With this MOD I propose to replace these potentiometers Hall effect sensor (without contact, and therefore less sensitive to wear and widespread in trade) Benefits: -Not of contact mechanics, therefore not extended (long life) wear d -The price of a Hall effect sensor (5-8 € ) -Retro compatibility total (if one day you want to restore your mechanical potentiometers) With this MOD, I do not propose to rejuvenate your TM Cougar, but rather a modernization that will allow you to keep a little longer without having to regularly replace mechanical potentiometers (A) Supplies To replace your mechanical potentiometers by Hall Effect sensors need you: 2 - Hall effect sensor:Ref SS495A1 ( have chosen these sensors, but there are other brands) 4-Magnets (dimensions: 12 x 7 x 5) 1- Baguette of protection (for support of the sensors) (B) Essential equipment 1 -Pistol with a glue stick glue 1 -Soldering (40W) with iron a little wire 1-Phillips screwdriver 1 -6 Key (flat or tube) 1 -Pot of glue cyanolite (preferably Loctite super glue 3) 1 -Small saw or a large cutter (for cutting the supports) © in the first place he must open the beast -(PC off) (1) Disconnect the TM cougar of the computer (USB port) then remove the base of the joystick handle (2) return the basement of the cougar and devise the 4 screws under the lid (to keep carefully) (3) Now we remove the printed circuit plate. Remove 4 Phillips screws; don't forget to unscrew the 4 screws of fixations of the external ports of the cougar with a key of 6 (on making rudder and making TQS). Then raise the plate gently (there must be no resistance, if not c is that you forgot a screw) (4) Gently unplug the catch of the potentiometer of the Axes X and Y on the printed circuit board (5) Remove potentiometers unscrewing the screws of the media and by gently dragging back, recover the 4 screws of fixations (not force) (D) First operation (1) Take 2 magnets and verify which attract each other (2) Of the first (a little delicate operation) Attention cyanolite fingers (or even more attached Pictures) (3) Paste the second magnet on the opposite corner of the Gimbal X (while ensuring qu they at the same height and always drawn either in the same magnetic direction on this schematic) (4) Repeat this operation for the other 2 magnets on the Gimbal Y (E) 2nd operation,installation of sensors (delicate operation) (1) take the old potentiometers and cut the wires close to raz, expose 3 wire tip, then must be solder the wires to the hall effect sensor within the meaning of the attached wiring for each sensor For good do I you Council of welding wire first orange (2) once sensors welded, you must make the supports for cella we will use a piece of protection rod, qu it will cut about 2 centimeters in the meaning of the width and 1.5 centimeter in the meaning of the length for each medium, when c is done, position your sensor in support, and paste the with the glue gun, in the final it should look like has it: is not very aesthetic, but the important is whether functional (3) In the cougar, try positioning sensors in two magnets and attach them in tightening the screws on the support (see above attached Pictures) (4) plug catch sensors X & Y on the printed circuit board (5) rest gently the printed circuit board by attention to the cables, re - cover the 4 screws on the printed circuit board (Attention on some versions there is a cable of mass) and the 4 screws of fixations of the external ports always with the 6 key (6) Rest and close the lid with the screws (4) (7) Provide on the basis of the joystick handle (F) Connection and final calibration (PC off) (1) Connect the taking of the throttle on the cougar and the taking of the rudder (if equipped) (2) Re - connect taking USB of your cougar on a USB of your PC, then you can turn on your PC (3) So that everything works correctly, it is essential to re-doing a calibration of the cougar, this TM should launch the Hotas Cougar control Panel, and then go to "Startup & Calibration" click on the Manual Calibration button and follow the instructions, remain you more qu to name and save the calibration file and is good Thank to NN APACHE for his precious advice

Hi,Kobac, This is the original file for the Canadian skin livery = { {"KA-50-lamp", 0, "KA-50-PAINT-02-CAN1.bmp", true}, {"KA-50-PAINT1", 0, "KA-50-PAINT-01-CAN1.bmp", true}, {"KA-50-PAINT1_M", 0, "KA-50-PAINT-01-CAN1.bmp", true}, {"KA-50-PAINT2", 0, "KA-50-PAINT-02-CAN1.bmp", true}, {"KA-50-PAINT3", 0, "KA-50-PAINT2-DEF-03.bmp", true}, {"KA-50-PAINT4", 0, "KA-50-PAINT-04-CAN1.bmp", true}, {"KA-50-PAINT5", 0, "KA-50-PAINT1-DEF-05-SP2.bmp", true}, {"KA-50-PAINT6", 0, "KA-50-PAINT-06-CAN1.bmp", true}, {"KA-50-Vtulka_met", 0, "KA-50-PAINT-02-CAN1.bmp", true}, {"SOPLA_KA-50-PAINT3", 0, "KA-50-PAINT2-DEF-03.bmp", true}, {"KA-50-gear-rubber", 0, "KA-50-PAINT1-DEF-05-SP2.bmp", true}, {"KA-50_ST-rm_paint1", 0, "Ka-50_St_Paint2.bmp", true}, {"KA-50_Lifting_rotor_mast", 0, "KA-50-LRM-CAN1.bmp", true}, {"KA-50_LRM_Part", 0, "KA-50-LRMpart-CAN1.bmp", true}, {"KA-50_LRM-CENTRE", 0, "KA-50-LRM_centre-CAN1.bmp", true}, {"KA-50-LRM_B", 0, "KA-50-LRM_B-CAN1.bmp", true}, {"KA-50_BORT_NUMBERs", 0, "empty.tga", true}, {"KA-50_Turkey_Numbers", 0, "TactNumbers-USAF-black.tga", true}, } id = 5 name = "Canadian Forces" countries = { "CAN", } at the end of the file have see two lines {"KA-50_BORT_NUMBERs", 0, "empty.tga", true}, {"KA-50_Turkey_Numbers", 0, "TactNumbers-USAF-black.tga", true}, I think qu should place them in this way, to make this work

Hi PoleCat Déscription : just wait 20 seconds to Download

Hi,halls ,here is a new mod for TM Cougar :thumbup: =>Clic Here to Download

Hi Colonel T,you must save the file "loogbok" in "C:\{user_name}\saved_games\DCS Warthog\missionEditor "

Bonsoir Steffj pour des problèmes de ce genre ,merci de m envoyer un MP PS:compte utilisateur enregistré et activé :steffj (mail de confirmation envoyé le 26/12/2011)

Bonsoir Steffi quelle est la taille de ton écran ? et sa résolution max ? pour ça il faut aller dans le logbook et modifier les données ,mais je me souvient plus ou il est placé

Bonsoir Azaryen je suis tout à fait d accord avec toi,mais apparemment certains distributeurs vendent DCS A-10C version 1.1.1.0 alors qu il sont en version 1.1.0.7,je ne fait que rapporter une solution Viable au possesseur de la version DVD

Bonjour apparemment certain ont eu des problème avec l installation de DCS A-10C version Boite (DVD) ,voici la Solution 1-dés-installer DCS A-10C Warthog normalement sans utiliser de logiciel de désinstallation (ccleaner etc…) 2-pour Windows VISTA & 7 , aller dans C:\{nom_d utilisateur}\Parties enregistrées\DCS Warthog et éffacer le dossier DCS Warthog 3-Rebooter le PC 4-Installer DCS A-10C Warthog 1.1.0.7 ( donc la version Boite DVD EN) 5-Installer le Patch 1.1.0.8 6-Installer le Patch 1.1.0.9 7-lancer DCS A-10C --> Éditeur de mission-->Misc ou help /Crédit : vérifier la version du patch installé (1.1.0.9 Normalement) ATTENTION : ne pas essayer de passer directement au Patch 1.1.1.1 sinon réponse 10 Should be installed et plantage du jeu -Installer le Patch 1.1.1.0 -Installer le Patch 1.1.1.1 -Normalement c est tout bon :thumbup:

Hi,AlphaOneSix, can you please add "127Th Sibérian Tiger" in french squadrons web site/forum : http://siberian.tiger.ze-forum.com We are involved with BS1,BS2 and DCS :A-10C Warthog . thank

Hi alls, problem solved :thumbup: =>Look Here => And Here

Hi Alls, here is the complement to the blue door and some corrections (with the permission of LEFUNEST) :thumbup: =>clic Here

Bonsoir steffj c est NORMALE car comme indiqué c est la procédure pour Black Shark 2 pour Black Shark (Premier du nom) =>Voir ICI

Hi Timm, it is in C: \ Eagle Dynamics \ DCS Black Shark 2 \ Bazar \ World \ textures and for the Ka-50 Fictional skin Belgium Camo (for example) it is ka-50-paint1-def-03-bel-sar.bmp.dds , it is similar to other skins

Hi Alls ,in fact the real question, why you would rather ask this question then you have the answer for 7 days? (date: 11/13/2011, at 21h55 ) :music_whistling: http://www.checksix-forums.com/showpost.php?p=1222513&postcount=15 creation date of the post 11-20-2011,at 10:18 PM

Hi,alls Here is the return of the KA50 United Nations creates by ITY =>LOOK Here for install, extract and merge the "Bazar" file in "DCS Black Shark 2" (see picture BS2 Fusion included in the compressed file) Once installed, the name of the skin will appear in hardpoints Editor (replacing the SKIN NEW YEAR 2009) PS: made a backup of your files before all manipulations

Bonsoir , voici la méthode quand votre throttle n est pas reconnue dans le jeux il faut aller dans C:\{nom_d utilsateur}\Parties enregistrées\DCS BlackShark 2\config\input\ka50\joystick puis effacer le profil de votre joystick par défaut ,fermer le dossier,lancer BS2 aller dans OPTIONS => CONTROLS ,dans controls ,choisir "Axis command " et puis aller sur la ligne Flight controle collective dans la colonne représentant votre joystick, cliquer sur "Clear" puis "Add" la il faut bouger la manette des Gaz ,le programme reconnaitra l axe "JOY Z",une fois que c est fait cliquer sur OK et normalement c est bon votre collectif et bien reconnue dans le jeu

hi kyletiernan ,Great job

Hi Rflagg88 If you use the Photoshop software, need you the Plugins that serves as a back up images to the DDS format (is a NVIDIA plugins, but it also works with ATI graphic cards) Plugins available here Once the Template changed, it back up in the DXT3 format (as in the above example below) registration takes a little time

Hi Nayles the installation is different in XP and Vista or 7, and 7 as Vista should avoid installing in "Program File" and start the installation directly on the hard disk "c:\" default look =>here

Bonsoir,quelqu'un peu me dire si c est un Mortier de 120 ou 160 mm ? (ou autre)

Bonsoir Polux,je crois que la seul solution c est de faire déplacer un camion et activer le manpads lorsque le camion s arrete (utilisation d un trriger +zone de déclenchement) ,ç est plus réaliste :thumbup:

Bonsoir, petite info intéressante Grâce à votre ticket d’entrée, vous bénéficierez d’une remise de 30€*pendant un mois sur les plus prestigieux accessoires destinés aux passionnées du pilotage virtuel de la célèbre marque Thrustmaster. Les produits concernés sont l’ensemble joystick + manette des gaz Hotas Warthog qui font rêver de nombreux « simeurs » ainsi que 2 volants renommés : le T500 RS qui pousse encore plus loin les limites du réalisme et le Ferrari Wireless GT Cockpit 430 Scuderia Edition qui se déploie et se range en toute simplicité grâce à son concept innovant et sans fil. Alors conservez bien votre ticket d’entrée au Mondial de la simulation pour bénéficier des 30€ de remise différée pour tout achat d’un de ses produits effectué entre le 30/09/2011 et le 31/10/2011. *Voir modalités complètes sur le stand Thrustmaster source => C6