Shadok

Also, in the rio seat, with ffb activated, Iceman just obei to the speed order and not the others orders.

I try today with ffb not activated. And now the a/p light go on when I press the engage switch, but don't go off (and don't engage autopilot) when I press the auto reference button. Edit: The autopilot work well with ffb not activated AND trim implemantation desactivated in the special options of the F14. I forgot to do the last thing in my today test. Sorry

It seems track file are corrupted in DCS world. That mean you will see my plane crashing in the water. In the tacview file this is what you are supposed to see.

OK, I look at this: https://forum.dcs.world/topic/299867-tracks-crash/ But lauching the mission in a multplayer server don't solve anything.

Hello, In the track below you are supposed to see a plane flying horizontally in a straight line. this was the case the first time i viewed the track, but now i see a plane turning left and down, and crashing into the ocean. This happens every time I make a .trk file and I can't figure out if it's a problem with my PC or with DCS world. I also put the Tacview file corresponding to what I see when I launch the .trk file. Can someone explain me what appens ? Thanks

Hello, It seems there is multiples issues with FFB sticks. I already write about the AP issue with FFB in the feedback thread. Also I noticed that using the engage switch or switch to RIO seat make the plane/Iceman slowly turn right (see attached files). If I test without activating the FFB, I don't have these problems. This 100% reproductible. Using microsoft FFB joystick. Thanks ffb-issues.trk

I don't have a non ffb stick. Trying without ffb (and removing trim implementation, but maybe I don't have to do this for the test) the autopilot work well ! The issue stay the same for the autothrottle non disengaging. Thanks

Hi, Autopilote still don't work for me. Engaging Alt Hold Mode, then the engage switch (a/p ref light on) and autopilot reference (a/p ref light off) but it don't stabilize the plane. I try to make a .trk file but the record don't correspond to what I do (don't know why). Using microsoft ffb joystick and trim implementation in the special option of the F14. Also, autothrottle still not disengage after landing with it.

The game work with the headtracker device unplug. It seems that the problem comes from my side. Thanks for the help.

I had play DCS-world one time after patch, but the game freeze after a while. Then I can't launch the game anymore. Repair doesn't help. dcs.log

I have the same space problem on my harddrive. But to have the mklink fonction working I had to: - remove the "_downloads" folder from "E:\Eagle Dynamics\DCS World\_downloads" - create a "_downloads" folder on a harddrive where i have space (F). - open cmd.exe in admin mod. -and then: mklink /J "E:\Eagle Dynamics\DCS World\_downloads" F:\_downloads note: I use windows 10

Hello, I have move PersianGulf map to an other hard drive and make an mklink the original folder. But when launching DCS world I have this message: It seem to be like I don't buy it before. Any idea? Edit: I'm testing Syria map at the moment, I don't know if there is a correlation.

Hello, If using autothrottle and disengage it, we loss control of the throttle. Thanks

Hello, This is the same for the TF51 with sidewinder FFB2.

Same problem with my MSFFB2 joystick. Also, with the plane well trimmed, engaging auto-throttle and auto carrier landing mode make the plane slowly trim left. And auto-throttle alway re-engage (even with gears up) if I shift autopilot mode. And autolanding mode is still capricious, CMD control rarely engage correctly. Thanks

I just see this post here, seem to be more complex than what i think.

Hello, First, sorry for my english... Since this post, i alway have difficulty to use acls correctly with my MS2 force feedback joystick. The thing is when i try to engage with the NWS button, most part of the time i lose the CMD control, and sometime i can't engage it. The joystick is correctly trimed (trimmed?) but i don't have any room for maneuver, when CMD control is engage, a micro-mouvement (very micro) with the joystick disengage it. adding a dead zone on my joystick can't help because with a force feedback joystick, in a trimed position, the axes aren't centered. Does anybody experience the same issue? Can i modify some .lua file to have more room for maneuver with my joystick? Thanks for the answers.

Hello, Caucasus map, can not load anything at Zestafoni. Also some peoples ask to tell you they like to have SRS on the server, don't know if it was ask before. thanks

Thanks for yours returns ! So I have had toe brakes... and yes it's weird because I have to push up to use them. I try them with the TF51 and it's good (but I need practice, I use to fly helicopters).

Solved:

Thanks ! That was the problem. I carefully look for this for the other air-planes and forget to look for the F14...

Hi, When I use the F14 (in fly or cold) most of the time the virtual stick move randomly and quickly forward and backward and applie it to the jet. This only appens with the f14. I have a microsoft sidewinder forcefeedback joystick, running open beta DCS. A repair haven't change anything. In the track I only move the physical joystick left and right f14.trk

This topic should be move in bugs and problems.

Same problem for me. Also, in the intermediate values, the virtual stick move randomly and quickly forward and backward and applie it to the jet. This only appens with the f14. I have a microsoft sidewinder forcefeedback joystick, running open beta DCS. A repair haven't change anything. In the track I only move the physical joystick left and right f14.trk

Hello, It could be nice to be able to mark the F10 map at the place where we want to put our load and to have a ground guidance at this place. thanks. Edit: this is concerning helicopter !