subseauk

Have you managed to bind them with the CH47?? Thanks

I have a TM TPR for my rudder but I cannot get the toe breaks to work with this module!! They work on every other module I have tried them on but not this one!!! I have unbound all the axis controls and rebound but the toe brakes are not seen!!! Any help would be appreciated. Cheers

Hi, I have installed "The Way" as directed and made a waypoint list, then imported into DCS AH64 all without issue. I then watched the data being input into the AH64 keyboard but nothing shows on the MFD map? I cannot see what the issue is, do you have any suggestions? I would also like to use this for the new OH Kiowa but it say it won't work, any thoughts? Thanks

Thanks AdrianL

Hi I have been a user of DCS for several years now and got really excited when the hi-fidelity modules came on the scene. One of these being the F15E which I purchased almost immediately in the hope that it would be continued with it's development. Unfortunately it now seems, due to issues between ED and Razbam, that future support is not likely to be forthcoming and the module will likely fail due to lack of updates. If this is the case can I request a store credit to use against future purchases from ED? Whilst I know there is not normally a refund policy I don't think this falls within the "normal" range of reasons for a refund. It can be reasonably argued that the module will soon fail to perform after further updates to DCS and not the module, rendering it not fit for purpose!! As a purchaser of over 40+ other DCS Airframes, Terrains and modules it is easy to see I would not usually complain about the slowness to update etc but when a module fails, as the F15E will eventually do, due to lack of completing required updates going then the story becomes very different and at $63.99 it is not a cheap purchase by any means. I look forward to hearing your thoughts on this matter. Best Rgds SubseaUK

With a release date of 26th June @BIGNEWY is that still the target or has that slipped yet?? We need some cheering up after the F15E debacle!!!!!

Can someone with a bit more knowledge than me please tell me how to contact ED support ref a store credit as I cannot seem to find the relevant place to do this? Thanks.

Hi Hannibal, I have also made similar 3d Print on my Prusa, and have completed nearly all the wiring except the 3 rotary controls on the top right and top left of the Screen. Can you tell me what you used for these controllers and did you use the Leo Bodnar BU0836X to convert to USB? I have 3 rotary encoders I could use but I don't know what signal DCS needs from the controls. I have been told I will need to use Leo Bodnar software but again I don't know how to do this bit!! Any help or info would be greatly appreciated mate. Cheers

Hi all Appologies if this is the wrong area to ask this but I am in the process of building a 3d Printed Apache CPG TEDAC unit and need some information regarding 3 specific controls fitted and what signal DCS requires to operate the associated item. fIrst one is the OFF - DAY - NIGHT rotary switch on the top right of the TEDAC screen. Second and Third is the GAIN & LEVEL rotary controllers. I need to know what sort of signal input is accepted by DCS from these so I can install the correct parts ie Rotary Encoders or Potentiometers. Any help would be greatly appreciated as these are the last 3 items I need to complete the project. Rgds SubseaUK

your link to the file is not working mate!!!

Thanks Iwalter, unfortunately it won't run on my iPad ( 4th Gen ) but I appreciate the help.

Hi, this looks great and exactly what I was looking for. However I cannot find it in the App Store!!!! Has something changed?? Cheers SubseaUK

Hi Bailey, Thank you so much for the above info mate. Fingers crossed I don't mess up the install!!!! I will let you know how it goes, keep up the great work mate

Hi Bailey, I downloaded you Hind VA Profile as I have used a couple of you others which were excellent ( Keep up the great work ).However I am at a bit of a loss with the Hind Profile as you refer to DCS-Bios being needed. I have no idea what this is, is it a separate add-on or do you need to edit something in DCS and if so would this affect other modules? Any help would be greatly appreciated (also is there a guide to installing / editing this DCS_Bios??? Cheers

Hi all, Firstly appologies if this has been dealt with previously or put in the wrong place!!! I have two Thrustmaster MFD surrounds and two additional monitors to suit but I am looking to try and find out the easiest / best way to send the info from the main monitor to these as would happen with A10C etc. My problem? I would like to do this with Helicopter screens such as the Gazelle, Mil, Hind and hopefully Kiowa and Apache if and when they come out. Can anyone tell me if it is possible to do this?? Many thanks K

Thanks DB, I think it was you who helped me last time LoL Hi mate, I tried with the Updater but it was beyond me to get it working reliably so I now have a clean install of latest DCS. Thanks

Hi Gary, looks good but I cannot see how they are connecting to DCS? Is it via USB as this is how my monitors are run at the moment. Also would be nice to know if there are any conflicts with say VoiceAttack etc? Cheers

Hi guys, Hopefully the right area for this question! I have a couple of Thrustmaster MFDs fitted with Screens but I am struggling to get the aircraft MFDs to transfer to them! I thought if the aircraft in DCS had a screen then they would be transferrable to the small monitors or is this not the case?? I primarily fly choppers and would really like to get the gazelle, Hind and upcoming Apache and Kiowa out to these. Can anyone help a very inexperienced Windows user with the best way to go ( if at all possible ). Thanks Subsea

Hi guys, I have been out of VR for some time now but used to have my Quest running with DCS. Now I have latest DCS version with upgraded PC including a 2080ti card I thought I would give it another go. Unfortunately I have. forgotten the start up procedure and the the Quest starts as soon as I click on DCS which does not go to full screen in the headset like it used to. ( I am sure I had to start DCS from within Quest before but no sure ). All to often I get taken to the Quest desktop which is a pain in the rear to get out off!!!! Can anyone help with this please? Thanks Kev

Yep, also suffering from the "Listening Suspended" issue after reinstalling a fresh DCS Open Beta and updating Voice Attack as suggested by VA!!!! Arghhhh!!!!!! What is the solution guys?

Hi, I have the latest DCS open beta version and also latest SRS and I can get the server list up in Multi-player. However I cannot connect to several of the servers listed!! They are not passworded or crowded but appear greyed out in the menu. On another one I can select it from a search and get the list of aircraft in the server but the join button appears dim and will not let me click. Yet on another I can get straight in and SRS works fine!!! I am at the pulling of hair stage at the moment, I have done a full repair, unplugged and replugged all equipment into a powered usb, undone and removed all bindings, disabled all but 1 aircraft, tried with and without SRS running!!! No difference. I don't have antivirus running and unless windows 10 is doing something screwy I don't know about!!! but how can I connect to one server and not a lot of servers I have previously been on and now cannot get to?? Any help appreciated guys. Cheers

Sorted now guys, I think the problem lay with voice attack!!! I uninstalled it and the issue resolved itself!!! Cheers

Apologies if this is in the wrong place!! Hi all, been using DCS for a few months now and had just started getting into multi-player online ( I fly only choppers at the moment ) so installed SRS which took some time but finally got it running. Then after a DCS update a month or so ago I started having problems where the DCS comms menu started popping open by itself aver few seconds. I removed the SRS link, I removed all the mappings within DCS for the Huey and started from scratch. This seemed to cure the automatic pop up issue but now pressing the re-assigned button for SRS brings up the DCS comms menu again and does not activate the SRS comms!!!!! I think I am slowly going mad as I can hear others on the comms but they cannot hear me and I get no indication of transmitting on the SRS. Can anyone help me please? Thanks

Thanks guys, I will have another look at this tonight. I lost a lot of key bindings on the last update. :-(

Hi, pretty new to DCS in general but I liked the idea of a GPS unit that could be integrated into aircraft like the Huey amounts others. However I cant seem to get the GPS to show, can anyone help with how to install it correctly please? Thanks