Unused models in shapes folder.

thanks iii try!!!!

Here it't the modification list.

 

Important:

 

Backup all of original file and always use Notepad++ to file modification.

 

All the best.

Thanks for the help beczl!

I have a problem. Followed the instructions, plus had to create a UH-60A_ER.lua file, otherwise I got an error during program startup. For that, I cloned the UH-60A.lua and changed the first line from

return helicopter("{8CC2AAFA-F5F6-498D-83E0-681561D691B8}", "UH-60A", _("UH-60A"),

to

return helicopter("{A57E6971-D65D-45b4-AB31-545C66240844}", "UH_60A_ER", _("UH_60A_ER"),

.

DCS starts up now, but how do I select the UH-60A_ER as my aircraft? It does not show under Russia, Turkey, or USA in the mission editor.

Thanks again!

the first time we saw the harrier was on the Battle simulator website

http://www.thebattlesim.com/index.php?lang=en&end_pos=148&scr=home

 

So I don't think it was necessary for DCS, probably leftover from that project.

No.

There is still a harrier and Ka-52 mod! Only 2 lua files... But the Harrier have no weapons for now.. http://forums.eagle.ru/showthread.php?t=33537&highlight=Harrier&page=3

@miguez:

Sorry. My fault. I missed some info from the attached doc (crap MSWord). See the corrected docs in attachment.

@Mapi:

As I remember NRG-Vampire working on the Harrier payload. Ask him. :-)

I hope today afternoon I'll be finish the MedEvac skin and the correct pylon position for the UH-60A_ER.lua I'll post them ASAP.

How to add UH-60ER to DCS-BS V1.01.doc

I created a Modman package. This automaticaly install all necessary new file (skin, loadout pic, etc...), but the full installation is remain manually!

http://beczl.tvn.hu/download/UH-60ER_Med_Evac.zip

I created a Modman package. This automaticaly install all necessary new file (skin, loadout pic, etc...), but the full installation is remain manually!

 

http://beczl.tvn.hu/download/UH-60ER_Med_Evac.zip

thanks :thumbup::thumbup: but if i install UH-60 ER EVAC i delete another hellicopter like sea lynk ???

beczl

Thanks for your efforts on this so far.

I have added the UH-60A_ER and I have a small bug. When I fly both helo's at the same time they both have the _pylon skin with the medical crosses showing. ( I have made up my own _pylon skin until yours is ready)

Is the CLSID number for the _ER version's skin correct ?

Have you noticed that the Tail for the _ER sits on the ground, the wheel sinks into the ground up to the airframe.

Wow ! You do an amazing modelingt work Beczl :thumbup::thumbup::thumbup:

@ntonis:

The Lynx don't exist in the game.

@crazyeddie:

Yeah your right. I made a mistake about the skin CLSID.

The correct one is: 11FCBFBC-B061-4b38-87ED-44AEAEC5B6EC You have to check in the unitclasses.lua and the UH-60_ER.lua too.

The download file updated according this issue.

http://beczl.tvn.hu/download/UH-60ER_Med_Evac.zip

@Lotham:

It's not my model :-) It's made by ED. I'm only "activated" them. :-)

thanks!!!!!!! great!!!!!:):):)

i install it but before begin the game at the end loading bar i have CDT:(:( I add using the doc manually and thene with the modman

I checked my mod twice on two different game instance. It's working.

So did you use Notepad++ for the file modification? Did you insert all of modification to the correct file? because if you miss to put in the correct file something, or miss some charachter (especially comma or bracket) the game won't be start.

If you follow beczl's guidelines it does work.

I found one small error in 1 file, forget which one now, there is a " missing at the end of a line (but that might well have been my mistake copying his instructions over).

When you run the game it will throw up an error telling you which file has a mistake in it, just open that file, find the error and fix it. That can take some time, these game files are very complex and a simple full stop in the wrong place will stop it running.

I have decided not to use the _ER mod just yet because of the tail wheel problem, I suspect that is something to do with the _ER .Lom file. There is also a small problem with the tail at a given distance, if you set up a flight of 4 aircraft the one furthest away has its tail broken off and up in the air, again that has to be something in the .Lom file. Not something I know enough about to correct.

Another simple option for the _ER is just replace the existing UH-60A with the _ER Lom and LOD files and use his Texture files to give you the Medical version with the extra tanks, you loose the other version in the process but this one sits on the ground correctly, as far as I can tell.

Have also been playing with the Harrier, a really nice model but it is difficult to find an existing model to clone it to. It sits so low on the back wheel there is no other model with the same height at the back and the angle is impossible to match, closest I have found so far is the F5-E, But even then it looks all wrong on the ground, back wheel is about 1 foot off the runway. I suspect there is a way to add the aircraft to the game in its own right and that should fix that problem, If I can get that sorted I might have a look at loadouts.

.

Hi,

The last remaining error was in the UH-60A_ER.lua. It's already corrected by me. ( Shape = "UH-60A_ER”,)

Have you noticed that the Tail for the _ER sits on the ground, the wheel sinks into the ground up to the airframe.

I haven't noticed yet. But I use a lot of modification at this time :-) Further development in progress.

Does anybody have "How to make flyable some any other helicopter" maual?)

Does anybody have "How to make flyable some any other helicopter" maual?)

Not yet.

Hi,

 

The last remaining error was in the UH-60A_ER.lua. It's already corrected by me. ( Shape = "UH-60A_ER”,)

 

 

I haven't noticed yet. But I use a lot of modification at this time :-) Further development in progress.

Yes, that was the file with the error in it, not a big problem to fix.

Thanks for getting this thread started beczl, I love this sort of problem.

I am wondering what happened to The Sea Lynx, somebody at ED must have been considering it as a new model to have put it into the existing game files, it would be nice to see it but I think they need to create new models for the existing helo's first, the CH-53 and the SH-60A are quite poor now compared to the others.

That would be really my wish flying Harrier or Jaguar Sepecat whit clickable cockpit, I would even consider to do some ground duties :)

Jaguar is on its way from our French friends, French and British versions were being made, not sure how far that has been developed but they did post some nice screen shots of it quite a while ago.

Looking forward to it, a truely "cute" little bomber, aircrew who flew it loved it. Almost retired from UK service now.

Yep, E.D. isn't added (yet) armed naval choppers into DCS. (Ka-27 is unaramed but floatable > has huge inflatable ballons;)) coz depth charges, torpedos and mines/bombs aren't modeled (yet).

---------

AH-1G with minigun

is fliable Uh60 ?

Yep, E.D. isn't added (yet) armed naval choppers into DCS. (Ka-27 is unaramed but floatable > has huge inflatable ballons;)) coz depth charges, torpedos and mines/bombs aren't modeled (yet).

 

---------

 

AH-1G with minigun

 

SH-3B or whatever it is can carry a Penguin anti-ship missile :)

@NRG-Vampire: Hehe. I already working to arm a KA-27 with Glub & Torpedo. Both of them are already in the config files.

For example:

-- bombwsTypes["{897D4395-EE32-4BF4-B225-A6B45383E74A}"] = 24 -- GluB

-- bombwsTypes["{4603A9D4-D1C1-4453-A098-06ECEC4E1CBC}"] = 27 -- Torpedo

AH-1G:

I replaced the AB-212SW model and config to AH-1G. It's launching FFAR ang Guided missiles, but it doesn't fire with his gun.

I have only one other problem. The model doesn't sits on the ground correctly (sink) as UH-60_ER too.

So I changed to the SH-3W to the UH-60A_ER model and config. The model doesn't sink into the ground anymore, but their gears are in above the ground approx. 5-10cm. Everything looks like good except the mentioned model position above the ground.

I have a same positioning problem about the AH-1G. But on the whole it's nicer IMHO than the "ugly" old AB-212 one.

SH-3B or whatever it is can carry a Penguin anti-ship missile :)

O.K. Yes (only) Penguin works by (naval chopper) AI but ....

@NRG-Vampire: Hehe. I already working to arm a KA-27 with Glub & Torpedo. Both of them are already in the config files.

 

For example:

 

and the old "gl-bomba" model in the modelshapes folder too.

...but other WFMs/behaviour for depth charges, torpedos and mines/bombs are missing ...so how will a torpedo works in DCS ?

I think: no way at this time :cry:

Does anybody have "How to make flyable some any other helicopter" maual?)

Not yet.

Hey Beczl, You know it's not exactly true :smilewink: We have this "little" secret

I hope it won't be scandal and flame :megalol:

I'm flying (all) other choppers with Ka-50 cockpit since Xmas ...FMs a bit different for each choppers (i changed FMs):censored::D

Nowadays im working on Harrier FMs (i know: phooey - with Ka-50 cockpit) but better than nothing :)

If you guys wanna see it: you can find me on SWAC server (Special Weapons And Choppers) :D

Ohh ...1 more: R-60, R-73 and R-77 are working on Hokum. Sidewinders are working on Apache and Cobra. :gun_smilie:

@NRG-Vampire:

Yeah I know it's possible, but it's more difficult than LockOn. And it cause several issue and bug.

I created my own PLAB-250 depth bomb and assigned to the Ka-27. Now the helo can attact submarine with his boms. :-)

I reconfigured the UH-60 ER to MH-60L DAP. Now it's capable to support fire with his AGM-114K and FFAR's too. And the skin conflict with UH-60 is resolved too.

I'll be upload some screenshots afternoon.