ebabil Posted October 25, 2014 Posted October 25, 2014 i use ch pro pedals, i couldn't set toe brakes. can you help me? FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 | Mi-24 | F-5 | F-15E| F-4| Tornado Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60 Youtube MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5
Fughuert Posted October 26, 2014 Posted October 26, 2014 Mi8 does not have toe brakes it uses buttons on the cyclic http://www.digitalcombatsimulator.com/en/products/magnificent_eight/?PAGEN_2=3#446367
Devrim Posted October 26, 2014 Posted October 26, 2014 That's right but, I'd like to assign it to the pedal... This is same in Ka-50, but we can assign toe brakes... Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64) Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR >>MY MODS<< | Discord: Devrim#1068
T_A Posted October 26, 2014 Posted October 26, 2014 If there is no Axis for braking on that plane (some don't have it) then you need to use your pedal`s software to set it . also you wont get differential braking of course IAF.Tomer My Rig: Core i7 6700K + Corsair Hydro H100i GTX Gigabyte Z170X Gaming 7,G.Skill 32GB DDR4 3000Mhz Gigabyte GTX 980 OC Samsung 840EVO 250GB + 3xCrucial 275GB in RAID 0 (1500 MB/s) Asus MG279Q | TM Warthog + Saitek Combat Pedals + TrackIR 5 [sIGPIC][/sIGPIC]
ebabil Posted October 26, 2014 Author Posted October 26, 2014 i see no option for toe brakes in settings, so i couldn't set. how can i do that? FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 | Mi-24 | F-5 | F-15E| F-4| Tornado Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60 Youtube MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5
Auger73 Posted October 28, 2014 Posted October 28, 2014 i see no option for toe brakes in settings, so i couldn't set. how can i do that? It is a 2 part process: 1. Map toe brake through CH Control Manager to a button. 2. Map button to wheel brake in DCS. You have to use the CH Control Manager software (and the Control Manager has to be running while you are in DCS). You may need to look for help on the CH forum on how to map the brake pedal axis to a button. I am 99% certain this can be done. I used to have a CH HOTAS setup, although I haven't had it for about 5 years, so I am fuzzy on the details.
EagleFox Posted January 9, 2015 Posted January 9, 2015 Mi8 does not have toe brakes it uses buttons on the cyclic http://www.digitalcombatsimulator.com/en/products/magnificent_eight/?PAGEN_2=3#446367 It dosen't use buttons on stick it has handle on stick that you press with your finngers
Socket7 Posted January 10, 2015 Posted January 10, 2015 There is no brake axis for the MI-8. Therefore, you cannot assign the toe brakes, because they are seen by DCS as an axis. What you need to do, make the toe brake be seen by DCS as a button. You will have to use the CH control manager to accomplish this. If you uncheck DX mode, it will allow you to configure any given axis as key presses, instead of a joystick axis. Once you've setup the CH control manager properly, you'll be able to assign the MI-8's brakes to your ProPedals toe brakes. I just played with the manager a bit to confirm that it's possible, but I didn't work out exactly the correct steps. You'll have to experiment. Practice makes perfect.
King_Hrothgar Posted January 24, 2015 Posted January 24, 2015 The Mi-8 appears to use the standard Russian braking system of a lever on the flight/cyclic stick. This lever does both total braking and differential braking (by slaving to rudder pedals). I don't know if the real Mi-8 has differential brakes or not, but it definitely has a braking axis in the form of that lever on the stick. It is not an on/off button. Hell, you can even see it as a lever very clearly in our Mi-8 cockpit. I don't know why it wasn't put in as an axis.
AlphaOneSix Posted January 24, 2015 Posted January 24, 2015 I don't know if the real Mi-8 has differential brakes or not It does not. It should, however, be an axis...not sure why it's not.
Rogue Trooper Posted July 10, 2015 Posted July 10, 2015 It does not. It should, however, be an axis...not sure why it's not. I think it is just a beta thing.:) HP G2 Reverb (Needs upgrading), Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. set to OpenXR, but Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), DLSS setting is quality at 1.0. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC... Everything needs upgrading in this system!. Vaicom user and what a superb freebie it is! Virpil Mongoose T50M3 base & Mongoose CM2 Grip (not set for dead stick), Virpil TCS collective with counterbalance kit (woof woof). Virpil Apache Grip (OMG). MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound... goodbye VRS.
DieHard Posted July 10, 2015 Posted July 10, 2015 (edited) i use ch pro pedals, i couldn't set toe brakes. can you help me? "Control Manager for Dummies" http://www.ch-hangar.com/forum/index.php/files/file/109-control-manager-dummies-guide/ See Page 75 or thereabouts, page 93 specifically for the Mi-8's situation. Ka-50 Profile http://www.ch-hangar.com/forum/index.php/files/file/131-dcs-blackshark/ You can take a look at his and figure out how he did it. I use this profile since BS1. Add your own controls http://forums.eagle.ru/showthread.php?t=115325&highlight=Add+Controls+UH-1H+Pilot+Sight Edited July 19, 2015 by DieHard [sIGPIC][/sIGPIC]
Recommended Posts