chromium Posted November 14, 2016 Author Share Posted November 14, 2016 I have to say that this is strange cause technically mist is not that much used in the package and shouldn't cause issue if loaded after DAWS. I have to check this before next release :). Thanks for the report Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
ESAc_matador Posted November 22, 2016 Share Posted November 22, 2016 Hello Chromium. I am not able to save it with the Infantry units deployed throgh the CTLD... nor spawn. It used to work, but it does not now. It seems that this infantry fix you made long ago doesnt work anyore. :( Link to comment Share on other sites More sharing options...
chromium Posted November 22, 2016 Author Share Posted November 22, 2016 Please check if the function It's enabled in the lua file. Soon or later i Will release that ****ing new version... Hope before christmas but my real work is Pretty intensive (and fantastic too) Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 23, 2016 Share Posted November 23, 2016 Hi Chromium, I have an issue you many be able to cast some light on. I have the DAWS latest version, when i enable this through JSGME and launch DCS 1.5.5 OB, load a mission in the mission editor, all the previous waypoints and names of units change to Dict_Kkey_xxxx - the xxx being numbers unique for each item. I disable the mod and can load the mission perfectly well. with the mod enabled, i am not able to launch a multiplayer mission with any mission loaded either. Any suggestions? Many thanks Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 23, 2016 Author Share Posted November 23, 2016 Are you Talking about saved missions with wp retained, are you? Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 23, 2016 Share Posted November 23, 2016 Hi This is with any mission, if the DAWS mod is installed then the view i get is attached, i remove the DAWS mod with JSGME and load the exact same mission i its perfect. Cheers Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 23, 2016 Author Share Posted November 23, 2016 Please try also with stable cause ob is not supported. I Will check anyway this evening. Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
ESAc_matador Posted November 23, 2016 Share Posted November 23, 2016 Please check if the function It's enabled in the lua file. Soon or later i Will release that ****ing new version... Hope before christmas but my real work is Pretty intensive (and fantastic too) Inviato dal mio SM-G850F utilizzando Tapatalk I do apologize.... I am embarrased... i forgot to re-configure after downloading! SOrry:huh::huh::huh::chair::chair: Link to comment Share on other sites More sharing options...
chromium Posted November 23, 2016 Author Share Posted November 23, 2016 :) Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
chromium Posted November 23, 2016 Author Share Posted November 23, 2016 Hi This is with any mission, if the DAWS mod is installed then the view i get is attached, i remove the DAWS mod with JSGME and load the exact same mission i its perfect. Cheers Can't reproduce the issue. If it's OB related, there won't be a solution for the moment :) Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 23, 2016 Share Posted November 23, 2016 Hi Chromium. I have done some further testing this evening. A friend of mine wrote the mission in 1.5.5 OB and also has DAWS installed and working in 1.5.5 OB When I have DAWS enabled in JSGME and try to launch any multiplayer server i cannot no matter what i do press the Start button on the screen you select the mission If however i disable DAWS in JSGME i can run any mission in Multiplayer. I am at a loss why this isnt working. Thanks Mith Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 23, 2016 Author Share Posted November 23, 2016 I have to say that it's probably caused by another mod installed or permission issues or something else specifically related to your installation. Sadly nothing that I could address from my position :(. Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 24, 2016 Share Posted November 24, 2016 I have to say that it's probably caused by another mod installed or permission issues or something else specifically related to your installation. Sadly nothing that I could address from my position :(. I just updated live to 1.5.5 and removed all mods apart from DAWS and tried in Live, didnt work, wont let me click the start button to launch a multiplayer mission, any help here would be great as I am supposed to be hosting a mission tonight, the start of the perpetual campaign many thanks Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 24, 2016 Author Share Posted November 24, 2016 Impossibile in this timeframe, sorry. I Will send you a debug version before saturday to let you collect relevant information to understand the issue. Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 24, 2016 Share Posted November 24, 2016 thanks Chromium, appreciated Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 24, 2016 Author Share Posted November 24, 2016 Anyway please try to remove all the mods, then do a repair and retry with last daws version in 1.5.5 stable. If It's not working this way, it Will for sure be something about your pc & daws. Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 25, 2016 Share Posted November 25, 2016 Hi Chromium, Tried that and it didnt work, I have put together a video of the process and the problem hope this helps. VIDEO LINK Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Pikey Posted November 25, 2016 Share Posted November 25, 2016 Something I noticed in the video Spec, You did a repair with the DAWS mod activated. After the repair you took it off then activated it again in one go. Youve essentially changed nothing in the DAWS mod by doing that, but also introduced the possibility that anything the DAWS mod had before the repair was kept and just "captured". What you need to do it deactivate all mods, demonstrate the issue is not present, then download and install a completely fresh "DAWS2" mod, put it in _mods folder, then activate it and launch DCS and demonstrate the problem exists. Your current steps dont show that the DAWS mod was not corrupt initially by a previous upgrade of DCS. Also the black screen around that time for two seconds does introduce a question on wether you are doing something different in that time. I recently introduced an unrelated issue in DCS by not disabling mods before updating, I have a strong suspicion that theres something in your current DAWS mod that is undesirable, I've seen that before and I'll have a sportsmans bet its where your issue is :) happy hunting! ___________________________________________________________________________ SIMPLE SCENERY SAVING * SIMPLE GROUP SAVING * SIMPLE STATIC SAVING * Link to comment Share on other sites More sharing options...
Pikey Posted November 25, 2016 Share Posted November 25, 2016 Just tested this myself, works exactly as it's intended. You just need to get rid of that old DAWS mod and whatever is in it. Here's my demo 1. download DAWS mod fromt he first page link .2. Create a new folder in your JSGME mods called something unique. 3. put the contents of the download in it. 4. Open JSGME and deactivate everything. 4. (optional) repair DCS, I skipped this step, if you have it working without mods i would skip it too. 5. Enable the mod. 6. Play. ___________________________________________________________________________ SIMPLE SCENERY SAVING * SIMPLE GROUP SAVING * SIMPLE STATIC SAVING * Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 25, 2016 Share Posted November 25, 2016 Hi Mate, i tried the repair before hand with the mod not enabled and that didn't work either, i must admit in the video i forgot to remove the mod, but as i said that is the second repair i have done with DAWS added and removed. still makes no difference what i do. Chromium is going to provide a debug version, hopefully that will shed some light on this, Tony is running 1.5.5 with the mod enabled and thats working, i just dont know what the hell is happening here and there is nothing in the logs to point to the cause mate Cheers Spec Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 25, 2016 Share Posted November 25, 2016 Hi This is a re-recording of exactly what you have done - still doesnt work. https://youtu.be/G-jjv3HEGI0 Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 25, 2016 Share Posted November 25, 2016 OK, I have just run another test, Completely removed DCS World LIVE from my machine Removed: C:\Program Files\Eagle Dynamics\DCS World - folder C:\Users\Mithandra\Saved Games\DCS - folder re-installed DCS from the web site Installed all the modules i own launched DCS with DAWS enabled and tried to start a multiplayer mission - Same issue checking the logs i see (from a default install i am getting the following errors in the logs [C]: ? [string "./MissionEditor/modules/mul_create_server.lua"]:266: in function 'onChange' [string "./dxgui/bind/Button.lua"]:22: in function 'callback' [string "./dxgui/bind/Widget.lua"]:318: in function <[string "./dxgui/bind/Widget.lua"]:313> 00034.189 ERROR VFS: VFS_open_write: CreateFile(C:\Program Files\Eagle Dynamics\DCS World\AMVI/SaveMission/mixpath.txt): Access is denied. 00034.189 ALERT LUACOMMON: Error: GUI Error: [string "./MissionEditor/modules/mul_create_server.lua"]:266: attempt to index local 'i' (a nil value) GUI debug.traceback: stack traceback: Line 266 of ./MissionEditor/modules/mul_create_server.lua is --DAWS Addition print("DAWS loading... " .. tbl.missionList[1]) local logpath = lfs.currentdir() .. "AMVI/SaveMission/mixpath.txt" local i, erri = io.open(logpath, "w") i:write(tbl.missionList[1]) i:close() --END DAWS Addition Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
chromium Posted November 25, 2016 Author Share Posted November 25, 2016 You have to unprotect your dcs folder from user permission and retry Inviato dal mio SM-G850F utilizzando Tapatalk Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously. Link to comment Share on other sites More sharing options...
Raz_Specter Posted November 25, 2016 Share Posted November 25, 2016 thanks Chromium on the DCS folder - > Properties - > Security I added my user to have full control and that has done the trick. Strange one to be honest as its a default install of windows 10. I am a happy bunny now :) thanks for the assistance Cheers Spec Custom built W10 Pro 64Bit, Intel Core i9 9900k, Asus ROG Maximus Code XI Z390, 64GB DDR4 3200 RGB, Samsung 1TB NVme M.2 Drive, Gigabyte AORUS 2080TI, 40" Iiyama Display. Wacom Cintiq Pro 24, HOTAS Virpil T50 Stick / FA-18C TM Stick and Virpil T50 Throttle, MFG Crosswind Graphite Pedals. HP Reverb SPECTER [sIGPIC][/sIGPIC] Lead Terrain Developer / Texture Artist Link to comment Share on other sites More sharing options...
Pikey Posted November 25, 2016 Share Posted November 25, 2016 Hmm, try editing the mixpath.txt to give a valid UNC path rather than the default one. Looks permisison related but I have no real idea why. I can see you have UAC on, I dont have that, other than that your test looks valid. If you copy any files across drives remember the NTFS permissions drop off. Off out now :/ ___________________________________________________________________________ SIMPLE SCENERY SAVING * SIMPLE GROUP SAVING * SIMPLE STATIC SAVING * Link to comment Share on other sites More sharing options...
Recommended Posts