A10-C Panel models and knobs

[LynxDK]

That is a very nice Panel :)

 

Nicely done, both Lars and ClayM :) i see you have found out how to engrave the panels, it looks superb :)

[tbies]

Looks fantastic! :thumbup: Can I ask what you using to make these? CNC machine on metal?

 

Lars

 

What do you think?

 

[ATTACH]126831[/ATTACH]

 

I draw up the buttons myself but the actual panel is from your files.

 

VFD display doesn't show well in pictures!

 

Thanks

 

Clay

[ClayM]

Thanks for the kind comments!

 

This is made from multiple layers of 2 color plastic sheets 1/16" thick. I have cheap made in china 3040 cnc. Works good with plastic. Not so well in metal!

 

Clay

[LynxDK]

Clay Can i ask what Display you have used, and is it connected to DCS Bios?

[ClayM]

Lynx

 

http://www.digikey.ca/product-detail/en/M0220SD-202SDAR1/M0220SD-202SDAR1-ND/1739773

 

For some reason pictures make display look blue. It actually looks green. The display is driven by its own program that Ian( FSFIan) wrote some time ago. I have it running from its own arduino uno that only handles the display. Works great but at some point I am going to integrate it with the arduino mega that i have controlling the switches and pots with DCSBios.

 

Clay

[Hansolo]

Very nice looking panel there ClayM :thumbup: Nice work sir

 

Cheers

Hans

[Lars]

Good job ClayM, I like it a lot!

I will do some tuning on the lines next to the text. It looks like the lines are to near and touch the text some places.

Did you make the back plate of aluminium?

 

Continue posting pictures of your panels!

 

-Lars

[LynxDK]

Lars, as i took a glimt at some of your panels, it seemed that the Fuel Control Panel is a bit to long, 1 DZUS too long accually. i dont know if someone can confirm that?

 

I have been trying to PM you, but im not sure if you recieve my Messages.

[Lars]

I will take a look at it. Thanks for the heads up.

 

I have not revived any PM from you lately.

(If the real panel is 7 1⁄8 inches my panel should have the correct dimensions...)

Edited November 10, 2015 by Lars

[Hansolo]

Lars, I am afraid I do not have a caliper that big so I measured it to a little over 180mm with a metal ruler. Sorry I don't have better tools for it :cry:

 

Cheers

Hans

[Lars]

Thanks HMA! kind of you to help out.

It looks like my panels is accurate then with 180.9750 mm

[LynxDK]

Your right, i thought it looked wrong, but after looking at it again, there is nothing wrong, sorry for the Misunderstanding :)

 

I have been writing you PM, dont know why you arent recieving them.... if you want, you can contact me on info@lynx.dk then we can talk :) Im very interested in Borrowing the seatpan for the ACESII :)

[agrasyuk]

I have been writing you PM, dont know why you arent recieving them.

 

Unless his inbox is full he did receive them. They will not show in your sent folder unless you explicitly choose to save them before (that check box is off by default)

[Lars]

Does anyone know if the parachute container for the F16 is the same used on the A10-C ACES II ?

[Deadman]

irreverent

Edited November 21, 2015 by Deadman
I guess he really did not want the question answered

[Deadman]

Lars, I am afraid I do not have a caliper that big so I measured it to a little over 180mm with a metal ruler. Sorry I don't have better tools for it :cry:

 

Cheers

Hans

 

Hans don't worry the cost of a good set of calipers to measure panels is over $100.00. That is a bit much if you don't have a ton of panels to measure.

[Hansolo]

Thanks HMA! kind of you to help out.

It looks like my panels is accurate then with 180.9750 mm

No problem Lars. Glad to sort it out :-)

 

 

Hans don't worry the cost of a good set of calipers to measure panels is over $100.00. That is a bit much if you don't have a ton of panels to measure.

Yeah I don't have that many panels so that would be too much

 

Cheers

Hans

[ClayM]

Lars

 

Cut SAS last night.

 

 

You were thinking the text on my CMSP was a little thick. As you can see SAS turned out great with thinner lines.

 

So ,if you have the same font in all your panels, I did something wrong on the CMSP. Possibly cut a little too deep?? Not sure.

 

When I have some time I will cut CMSP again making sure I use same settings as SAS ( which I thought I did ) and let you know what happens.

 

Thanks

 

Clay

[Warhog]

Clay, I don't think you did anything wrong. :music_whistling: Well maybe you did. :lol::smilewink:

 

With all the checking of your x and y axis for accuracy and reputability, did you do the same for the Z axis?

 

What I suspect is that your process of setting zero on the Z axis is not consistent from project to project. That would account for why your fonts are thicker or thinner from one setup to another.

[ClayM]

John

 

If you compare the CMSP and SAS pics how much error in Z height would you guess it is off by? Assuming same 60 degree .010" cutter. Realistically I think I must be + - .001" at the worst. Wouldn't it take 2 or 3 thou at least to have that much effect on line thickness?

 

Thanks

 

Clay

[Warhog]

Hi Clay

 

So I did some calcs based on the pics you provided. Bear in mind that because your pictures are not razor sharp pictures :music_whistling: I had to estimate the actual thickness of any particular line within a letter. Regardless, the estimates I got are pretty good for this exercise.

 

The change in thickness of the cut line from one panel to the other using a 60 degree v bit would require a change in cutting depth 0.005".

 

There you have it Clay. Thats what you need to be able to control to maintain consistent line thicknesses from panel to panel.

 

Hope that helps.

 

John

[Deadman]

John thanks for the in site of how precise your control and equipment has to be to achieve the high quality of light plates.

[ClayM]

Cut CMSP again

 

 

Looks much better.

 

Used the exact same settings. Changed NOTHING!

 

Set my z zero based on advice from Warhog.

 

So operator error on the last one.

 

Thanks Lars and John!

 

Clay

[Lars]

Very good Job Clay! Continue posting them pictures :)

[Warhog]

My pleasure Clay. I'm glad you were able to resolve the problem.:)