gazmonalpha Posted January 9, 2016 Posted January 9, 2016 Hi, I just bought this hotas which i am very pleased with but i havent got any dedicated pedals yet so i need to assign some control feature for this until i get pedals! was just wondering what others were using or the best button/control input to assign while i wait for pedals thanks for you thoughts gazmon System Specs, Core i7 950 OC 4.2Ghz, 1.5TB Hdd, MSI GTX 980 Ti, 24GB Ram, WIN 10 64 Bit, 1000w PSU ,Trackir5, Thrustmaster Warthog:)
tintifaxl Posted January 9, 2016 Posted January 9, 2016 You could try the incr/decr axis on the throttle or use the keyboard. Windows 10 64bit, Intel i9-9900@5Ghz, 32 Gig RAM, MSI RTX 3080 TI, 2 TB SSD, 43" 2160p@1440p monitor.
hansangb Posted January 9, 2016 Posted January 9, 2016 You could use the incr/decr, or just map both throttle to one, and use the other for rudders. But best is to save up and my MFG pedals. They are *AWESOME* hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Yurgon Posted January 9, 2016 Posted January 9, 2016 Agreed on both accounts. ;) I'd also use what is the friction slider in the real aircraft (that reads INCR and DECR) as rudder axis for the time being. And as soon as possible, get a set of rudder pedals, they really help a lot. Personally, I can't praise the MFG Crosswinds enough. :) Once the friction slider is freed up, it works very well as Zoom view in all aircraft. :thumbup:
gazmonalpha Posted January 9, 2016 Author Posted January 9, 2016 Thanks for the advice Sent from my iPhone using Tapatalk System Specs, Core i7 950 OC 4.2Ghz, 1.5TB Hdd, MSI GTX 980 Ti, 24GB Ram, WIN 10 64 Bit, 1000w PSU ,Trackir5, Thrustmaster Warthog:)
bushido Posted January 9, 2016 Posted January 9, 2016 I personnaly use the buton 4 (the triger at the bottom of the stick) as a modifier and use the trim control left and right for rudder. So basicaly when I need to use the rudder (mainly on ground for the A10) I press the botom triger and use the trim button, work well so far.
GurbY Posted January 10, 2016 Posted January 10, 2016 I personnaly use the buton 4 (the triger at the bottom of the stick) as a modifier and use the trim control left and right for rudder. So basicaly when I need to use the rudder (mainly on ground for the A10) I press the botom triger and use the trim button, work well so far. Almost the same as I did before I had my pedals: the pinky switch (not the NWS button) as modifier, and throttle coolie hat left/right as rudder. Worked rather ok. I needed the axis from the INC/DECR slider for zoom in/out.
Recommended Posts