kilo19 Posted October 9, 2016 Posted October 9, 2016 Hi Guys, was crossed between acquiring a RX480 or a GTX 1060 just for the full glory of DCS and finally got my hands on a Gigabyte RX480 G1 Gaming 8GB. I have been testing it out at full throttle since yesterday to utter disappointment the game just crashes with solid Pink colour on my monitors. I have turned the compatibility mode ON in Wattman but to no avail. I have been keeping a record of power draw which is 150W Max and Voltage slightly above 1.000, I have done no overclocking what so ever and even the card is not so hot at 71C. I turned down a settings a notch and still the game crashes as above. I'm just curious if anyone else is facing the same issue because this is a major let down for me. Right now I'm failing to isolate the problem to the hardware or the drivers because I have done this by the book and Microsoft Flight Simulator: SE is running fine. Please note that I'm able to start the game and fly and the game crashes anywhere between the 1min to 10min mark randomly, this is just to clarify because some people are not even able to start the game since the RX480. Another observation is that DCS consumes GPU Load constant at 100% and at 150W at Ultra unlike other games, shouldn't the GPU be supposed to handle such loads? NEED HELP!
kilo19 Posted October 9, 2016 Author Posted October 9, 2016 Ok so new results: Reduced MSAA to 4x, Anso to 4x, Reduced Terrain draw and trees, turned off field of view so basically with these reduced settings the GPU core clock never exceeds 800MHz and the VDDC remains just below 1.000V. Things are stable @60fps, this is basically the card operating at 62%. Anything beyond this results in crash i.e any consistant VDDC closer 1.1V. I have a Corsair VS650 PSU. What is to blame here?
razo+r Posted October 9, 2016 Posted October 9, 2016 Maybe you could post your crash logs and your full system specs Have you upgraded your GPU or bought a new PC? Then make sure correct Drivers are installed, especially when you had NVidia earlier What you also could do is watch how much of your RAM is used
kilo19 Posted October 9, 2016 Author Posted October 9, 2016 (edited) i3 6100, Corsair 8gb Vengence, Corsair VS 650 PSU, GB Z170 HD3 DDR4, Win 10 64-bit, 320gb 7200 rpm (with 3gb free space on the partition DCS is sitting on). I previously had a 750ti which would give lesser frames but would never freeze. Just added the above mentioned GPU. Used DDU to cleanup previous drivers. UNable to upload dcs.log file.DxDiag.txt Edited October 9, 2016 by kilo19
razo+r Posted October 9, 2016 Posted October 9, 2016 Zip the logs file and then you should be able to upload the logs, otherwise wait for BIGNEWY, he has a guide for that What settings are you playing on? The next time you play, press RCtrl + pause twice to see how much RAM DCS is using, maybe this is your problem
kilo19 Posted October 10, 2016 Author Posted October 10, 2016 Yes that is always ON! are you suggesting that system 8GB RAM is not enough? I obviously hit all settings At all settings ULTRA for starters with card drawing massive power and VDDC almost 1.2V. Now stable at Reduced MSAA to 4x, Anso to 4x, Reduced Terrain draw and trees, turned off field of view so basically with these reduced settings the GPU core clock never exceeds 800MHz and the VDDC remains just below 1.000V.
Oceandar Posted October 10, 2016 Posted October 10, 2016 Looking back at 1.2 version experiences, DCS doesn't work very well with AMD driver. I suspect this is driver related problem, particularly this RX 480 is quite new. If you just play DCS I'd swap the card to 1060. Otherwise, play with current setting that work for you and patiently wait for DCS 2.5. Good luck Gam Zeh Ya'avor - King Salomon Mastering others is strength. Mastering yourself is true power. - Lao Tze
HellsBells Posted October 10, 2016 Posted October 10, 2016 Looking back at 1.2 version experiences, DCS doesn't work very well with AMD driver. I suspect this is driver related problem, particularly this RX 480 is quite new. If you just play DCS I'd swap the card to 1060. Otherwise, play with current setting that work for you and patiently wait for DCS 2.5. Good luck Gam Zeh Ya'avor - King Salomon I've used AMD from day one simply because I use Eyefinity + 2 Lilliputs. Nvidia cards could not handle the 5th monitor unless same resolution.so I returned the 2 x GTX 1070 and purchased 2 x RX480. Drivers are no problem and works great. | i9 9900K Octa Core 2TB SSD +32GB Spectrix DDR4 @3200MHz RGB | 2 x Radeon RX480 in Crossfire. | TrackIR5 HOTAS Warthog,MFG Crosswind Pedals | Cougar MFDs | [OCG] Oceanic Combat Group discord.gg/ZmXEBSU "Through The Inferno" by deadlyfishes Official Australian Servers SRS: All Servers have Auto-Connect Enabled Server 1: TTI Caucasus Server 2: TTI Persian Gulf Server 3: OCG Training Server 4: OCG NTTR & Multiplayer Missions Australian Website AU Discord Server
kilo19 Posted October 10, 2016 Author Posted October 10, 2016 They have a new bios in today, lets hope this goes in some way to resolve this issue.
kilo19 Posted October 10, 2016 Author Posted October 10, 2016 I've used AMD from day one simply because I use Eyefinity + 2 Lilliputs. Nvidia cards could not handle the 5th monitor unless same resolution.so I returned the 2 x GTX 1070 and purchased 2 x RX480. Drivers are no problem and works great. I have a single 1080p 60hz monitor, and at all settings Ultra the card was reaching temperatures above 80C within a few mins, and VDDC was closer to 1.2V and power draw was 150W constant, I think this high consistent power draw might be the problem. Do you have Gigabyte G1 ?
kilo19 Posted October 10, 2016 Author Posted October 10, 2016 No luck even after the F7 BIOS today. Now trying to return the card.
HellsBells Posted October 10, 2016 Posted October 10, 2016 I have ASUS Maximus Mobo and Asus Radeon RX480 cards It comes with Asus GPU Tweak software that lets you change the Fan speed. http://downloads.tomsguide.com/ASUS-GPU-Tweak,0305-49504.html I tested using only 1 card Auto 50% 70% Different tests I performed. Hope it helps Use the Asus GPU Tweak Software it should work on any card | i9 9900K Octa Core 2TB SSD +32GB Spectrix DDR4 @3200MHz RGB | 2 x Radeon RX480 in Crossfire. | TrackIR5 HOTAS Warthog,MFG Crosswind Pedals | Cougar MFDs | [OCG] Oceanic Combat Group discord.gg/ZmXEBSU "Through The Inferno" by deadlyfishes Official Australian Servers SRS: All Servers have Auto-Connect Enabled Server 1: TTI Caucasus Server 2: TTI Persian Gulf Server 3: OCG Training Server 4: OCG NTTR & Multiplayer Missions Australian Website AU Discord Server
BitMaster Posted October 11, 2016 Posted October 11, 2016 8GB RAM and 3GB free HD-Space ?? you gotta be jokin' pal ! Fix that 1st and then we might be able to fix things that are fixable but we cant do wonders ;) Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
BitMaster Posted October 12, 2016 Posted October 12, 2016 as a rule of thumb, my DCS eats away 10GB RAM and about 12-12GB SWAP on BlueFlag, loading also takes a while and I wouldnt wanna do this with less RAM and no SSD. You are lost before you even hit the launch knob. Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
kilo19 Posted October 18, 2016 Author Posted October 18, 2016 No problems with my older GTX 750ti and medium settings, just like absolutely no problems with the replaced RX480 for an Asus Dual GTX 1060 6gb OC. I know I'm on the edge with ram and the HDD but it is no fault of those components that the Gigabyte RX480 G1 Gaming was a mess. 60fps Ultra all the time at cooler temperatures and much less power.
BitMaster Posted October 20, 2016 Posted October 20, 2016 Msi gaming x8 is pn my sons list, hope thatone is better than x1 Gesendet von iPhone mit Tapatalk Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
Coug4r Posted October 22, 2016 Posted October 22, 2016 (edited) Had crash problems when switching to the RX480 too, for me a driver cleanup did the trick. Never had issues since, although i don't run the game at high or ultra settings. Prefer a higher fps so i'm at medium-high(ish) settings. https://forums.eagle.ru/showthread.php?t=170509&highlight=RX480 I did what OldE24 suggested, in my case it found 3 old drivers that were (aperently) causing issues. Edited October 22, 2016 by Coug4r - If man were meant to fly he'd be filled with helium.
Recommended Posts