TripRodriguez Posted May 27, 2017 Posted May 27, 2017 Gotcha. I'll be doing this with typical toggle switch guards purchased on ebay (I already have them). Smil's type installation may work for me, I'll have to get one of the covers out and tinker a bit. [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim:
kadda Posted May 30, 2017 Author Posted May 30, 2017 Very impressive! Looks like you've found yourself a project to keep you busy for some time to come. :music_whistling: With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
kadda Posted June 1, 2017 Author Posted June 1, 2017 Can either of you guys show a picture of exactly how you installed your buttons actuated by the covers? I'm sure I can figure it out but it's always better to replicate something you know for sure worked well! This is the method I'd prefer, due to my looking at the pit in VR. found some old photos before i remove them :) i did the same for stop/idle , but i can show it it s in the iner mechanism ... With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
TripRodriguez Posted June 2, 2017 Posted June 2, 2017 Thanks Kadda, I appreciate the pictures. [sIGPIC][/sIGPIC] Demo of my 6DOF Motion VR Sim:
Baldawg Posted June 4, 2017 Posted June 4, 2017 @Kadda I did the very same thing with my switch gaurds, I put a simple momentary switch above the guard which is depressed when opened. The issue I have is that the guard doesn't hold enough pressure to keep the momentary down. I was going to bypass that idea and attach the signal wire directly to the guard and the ground to a solid location to make the connection. Win 10 Pro - Intel I7 12700k@4.9ghz water cooled - ASUS TUF Z690 -EVGA RTX 3080 12G Hybrid - EVGA 1000W PSU - 32GB 3200 G-Skill XMP- Reverb G2 -Custom mip and side panels - Leo Bodnar BBI32x2, BBI64x4 - TM Warthog HOTAS - TM Cougar MFD's x 3 - TM TPR pedals
kadda Posted June 4, 2017 Author Posted June 4, 2017 @Baldawg , yes in my case the covers had enough presure to close the switch, but i decided that it was a very rude sollution, i think i can solve it be some coding :) With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
draken152 Posted June 4, 2017 Posted June 4, 2017 Men for some unknow reason this build had flown under my radar. Really great work men:thumbup::thumbup::thumbup:. In my pit, I am currently ending my stage one (all inputs workable) and preparing myself for instruments creation. I have some basic knowledge but zero experience with instruments creation. So any advice for newbie:lol:??? [sIGPIC][/sIGPIC] Building FW190D pit ,,To Dora with love" http://forums.eagle.ru/showthread.php?t=132743
kadda Posted June 4, 2017 Author Posted June 4, 2017 (edited) @draken152, Patience, passion, and good working pressure , and feel free to write me when you get stuck or when you have questions , don t forget i m not an expert too , so as i made it you will make it too :thumbup::thumbup::thumbup: Edited June 4, 2017 by kadda With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
BravoYankee4 Posted June 4, 2017 Posted June 4, 2017 When it comes to the switch guards there is a great product that can be used - the arcade coin switch. It has a small lever that can be modified and it only requires a very small ammount of force.
kadda Posted June 4, 2017 Author Posted June 4, 2017 (edited) When it comes to the switch guards there is a great product that can be used - the arcade coin switch. It has a small lever that can be modified and it only requires a very small ammount of force. Thank you BravoYankee for the info, but in my case i can t buy from the net, we ve not the delivery services :( I ve installed back my switches until i find a soft sollution for this ... Envoyé de mon X5max en utilisant Tapatalk Edited June 4, 2017 by kadda With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
kadda Posted July 1, 2017 Author Posted July 1, 2017 My new RPM indicator, have to reprint the plastic transmition shaft ... But working fine Will start the variometer very soon ... With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
kadda Posted July 6, 2017 Author Posted July 6, 2017 (edited) @JG14_smil the export that i found for IKARUS and DAC some changes done for the altimeter arg using them before final installing of the Master panel in the cockpit, and for the sreen for the instructorDCS-ExportScripts-master (1).zip Edited July 6, 2017 by kadda With respect _________________ Kadda _________________ My works TL-39 (NewGen) project (Ру)/(EN)
JG14_Smil Posted July 6, 2017 Posted July 6, 2017 Got it. Thanks, Bud. Pretty busy lately and might be a day or two before I get to it.
Recommended Posts