hansangb Posted December 26, 2017 Posted December 26, 2017 So normally, I just do a clean install of Win10. But I'm feeling a little lazy. I'm thinking of just swapping the MB (so 7700K to 8700K and Z270 with Z370) with everything else staying the same. So, will it boot? Or should I take the time to uninstall everything (Camtasia, Ultraedit, Acronis, O365 and do a fresh install? hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
BitMaster Posted December 27, 2017 Posted December 27, 2017 I carried my10 install over from Z170-->Z270-->ZZ370 Deinstall the drivers and specialties, thats it. If you know what you do, this is 1-2-3 done. DEACTIVATE DCS before ! Tho it did not get the Z170->Z270 change back then but punishes you for tinkering with the RAM on a bad day Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
Cibit Posted December 27, 2017 Posted December 27, 2017 Windows 10 won't bloody activate for me after Hardware changes. Grrrrr been a bad experience for me this last build. I had it linked AFAIK. Better check Han i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
BitMaster Posted December 27, 2017 Posted December 27, 2017 tie it to your ms account, install w/o key and if it wont activate then use the troubleshoot wizard and choose " i changed my hardware recently ", that will take you to your ms account, with all 10 listed that you own under that email. click the one old pc which lic you want to use and say, "use this pc's lic". that's how i do manage my 10 x 10 lics Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Sapphire Nitro+ 7800XT - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus XG27ACG QHD 180Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X
hansangb Posted December 27, 2017 Author Posted December 27, 2017 Thnx. I figured I'd give it a shot, but wanted to check. Thanks for the confirmation guys. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Brainless Posted December 28, 2017 Posted December 28, 2017 I replaced the motherboard of my wife's computer recently. Did not touch any drivers. Windows 10 booted without any problems and installed all needed drivers. Only needed to go through phone activation (no digital license). Few days ago I done the same with the Windows 7 computer of wife's parents. Ryzen 5900X (Water), 64GB DDR4@3600CL16, RTX 3090 (Water), U4021QW, Samsung 980 Pro 2TB, 2x1000GB RAID 1, 2000GB, Thrustmaster Warthog + MFG Crosswind, Reverb G2 V2
hansangb Posted December 28, 2017 Author Posted December 28, 2017 Thanks again! hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Johnny_Rico Posted December 31, 2017 Posted December 31, 2017 (edited) you could probably sysprep it first before the board swap, might make things go easier Edited January 1, 2018 by Johnny_Rico METAR weather for DCS World missions Guide to help out new DCS MOOSE Users -> HERE Havoc Company Dedicated server info Connect IP: 94.23.215.203 SRS enabled - freqs - Main = 243, A2A = 244, A2G = 245 Please contact me HERE if you have any server feedback or METAR issues/requests
hansangb Posted December 31, 2017 Author Posted December 31, 2017 Thanks Johnny. I guess I have that safety net as well. And I'm a compulsory Acronis! :) hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Johnny_Rico Posted January 1, 2018 Posted January 1, 2018 Thanks Johnny. I guess I have that safety net as well. And I'm a compulsory Acronis! :) Me to, I always backup before playing Nvidia driver roulette METAR weather for DCS World missions Guide to help out new DCS MOOSE Users -> HERE Havoc Company Dedicated server info Connect IP: 94.23.215.203 SRS enabled - freqs - Main = 243, A2A = 244, A2G = 245 Please contact me HERE if you have any server feedback or METAR issues/requests
Recommended Posts