Sensitivity TDC

[AlexRandom]

Hello. Is there any way to increase the sensitivity of the TDC on the radar screen? I use the axis on the joystick and it would be easier for me to control the radar if the TDC moved faster. If it is necessary to correct where that lua file, such as with a page ALE-47, tell me where to look.

[majapahit]

Hello. Is there any way to increase the sensitivity of the TDC on the radar screen? I use the axis on the joystick and it would be easier for me to control the radar if the TDC moved faster. If it is necessary to correct where that lua file, such as with a page ALE-47, tell me where to look.

Control>Axis (find your slew XY axis, move and indicators show)>"Axis Tune"?

[Wait4It]

Try the saturation for the axis, so you dont have to push so hard.

 

Saturation plus a curve worked wonders for me

[AlexRandom]

no no no. these axes move the TDC with the maximum possible speed. all attempts to move the settings only aggravate the situation. the speed of TDC is not increased. this speed is usually small. although the video with the real aircraft I saw TDC can be moved in a second, maybe less. I would use radar control with TDC, but this shit crawls too slowly)) it's easier to press the mouse or the button on the panel from thrusmaster.

[LeCuvier]

In the past I had the Y-Saturation reduced to about 40% or less (like on the A-10C) because I found the cursor speed too high for accurate positioning. And I thought it could be accelerated by reducing X-Saturation. But I find that now these parameters have no effect at all on the TDC cursor. For me, it's fine but I agree there should be a way to adjust the speed.

[Wait4It]

If you mean the maximum speed within the DDI it moves from left to right. There probably is an option. There is in the a10c. Not sure about f18

 

But again, mine moves pretty fast when given full input from the Warthog mini stick. 1-2 seconds left to right i guess. This full input is given faster through axis saturation.

Edited July 11, 2019 by Wait4It

[Ziptie]

I use the "mini-stick" on the throttle of the TM Warthog HOTAS and also had some issues with the TDC cursor (in the F/A-18C as well as the A10C).

 

Under the axis commands, there are two categories - one for TDC vertical and the other for horizontal. They are adjustable (independently of each other in fact) without adjust the axis for the actual pitch and roll of the aircraft. *Seems like you were concerned about adjusting for the desired TDC cursor slew but adjusting the pitch and roll inputs at the same time*

 

The verbiage was slightly confusing to me with your first and second posts - as it seems some others might have been as well. Possibly misunderstanding some of the guidance that others provided to you as well.

 

Axis commands should be towards the bottom right of the controls screen, the look for the TDC sensor slew vertical and horizontal (which again, are not going to adjust the actual inputs of pitch and roll of the airframe).

 

You are using a modifier to achieve this while using the actual joystick (similar to the RIO position in the F-14 correct?).

 

The modifier feature is quite handy, for me personally, in many different aircraft - even though the TM Warthog HOTAS has plenty of switches and buttons to bind. Just cleans things up for me and makes transitioning from different aircraft much less confusing when getting into the "heat of the battle moments."

 

 

I would post screen shots to make it easier if I was not out of the area and had access to my gaming PC.

 

 

Cheers,

 

Donald Aarseth