santanig5 Posted August 29, 2019 Posted August 29, 2019 Greetings, Question for the group, I am new to PC gaming and DCS, I purchased a T-Flight HOTAS One controller and mounted it on a frame I built, but the wire between the throttle and the stick is too short. Can someone point me to directions to modify? I assume some of you have found the same. Thanks Sent from my iPad using Tapatalk
Mars Exulte Posted August 29, 2019 Posted August 29, 2019 Eh, probably wrong thread to get into ''how tos''. Rewiring it persay isn't.the problem, it's that if you start extending the wiring you might get signal issues. In general, people tethering their stuff together like that is to save a few cents on parts on the inside @@ That's really probably not an ideal device for pit building :p Де вороги, знайдуться козаки їх перемогти. 5800x3d * 3090 * 64gb * Reverb G2
ED Team BIGNEWY Posted August 30, 2019 ED Team Posted August 30, 2019 Moved to input / output, might get better answers here Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
santanig5 Posted August 30, 2019 Author Posted August 30, 2019 Moved to input / output, might get better answers here Thanks, posted there, with no replies, yet. Sent from my iPad using Tapatalk
SGT Coyle Posted August 30, 2019 Posted August 30, 2019 Greetings, I am new to PC gaming and DCS, Welcome to the jungle. Life will not be the same. I assume that the cable is "Hard Wired". That being the case, I would start by opening it up to see whats under the hood. That, I also assume, will destroy your warranty. If you go under the hood route, I would look at wiring a longer cable to controller and splicing it to the other, for starters. See if it works. Maybe look into a set of connectors that will allow you to do a more permanent job. I would also think about soldering skills. Most of these wire in the cables are very thin for wire nuts. But, actually I think you bought the wrong controller. The fact that you here tells me your ready to go a step further with a better setup. I don't know your financial situation, but maybe save up for it. This sort of thing can get expensive. Good luck. If you do go the under the hood route. Post photos. We might have use full suggestions. Night Ops in the Harrier IYAOYAS
Supmua Posted August 30, 2019 Posted August 30, 2019 Why not center mount that stick instead, should give you enough reach. Having said that, upgrading to the T16000M HOTAS set might be even better. PC: 5800X3D/4090, 11700K/3090, 9900K/2080Ti. Joystick bases: TMW, VPC WarBRD, MT50CM2, VKB GFII, FSSB R3L Joystick grips: TM (Warthog, F/A-18C), Realsimulator (F-16SGRH, F-18CGRH), VKB (Kosmosima LH, MCG, MCG Pro), VPC MongoosT50-CM2 Throttles: TMW, Winwing Super Taurus, Logitech Throttle Quadrant, Realsimulator Throttle (soon) VR: HTC Vive/Pro, Oculus Rift/Quest 2, Valve Index, Varjo Aero, https://forum.dcs.world/topic/300065-varjo-aero-general-guide-for-new-owners/
Sokol1_br Posted August 30, 2019 Posted August 30, 2019 This cable has a removable plug in one of the controls or they are just "tied" together?
Recommended Posts