joojoo Posted September 23, 2019 Posted September 23, 2019 hey to all I have a little issue when I begin from Stennis. When I go from ramp or parking hot, when I attach to the catapult the aircraft starts trembling and never takes off. When I try runway hot everything its ok. Any idea? Thanx
AG-51_Razor Posted September 23, 2019 Posted September 23, 2019 Have you looked at your plane from the F2 view? Maybe the chocks are still in place. [sIGPIC][/sIGPIC]
joojoo Posted September 23, 2019 Author Posted September 23, 2019 nope, the plane trembles only when I attach to the catapult
Swift. Posted September 23, 2019 Posted September 23, 2019 I have seen the same issue happening, its a bug. IDK if its been reported yet all of my tracks were too large. The workaround is just to respawn in a new jet. 476th Discord | 476th Website | Swift Youtube Ryzen 5800x, RTX 4070ti, 64GB, Quest 2
Devrim Posted September 23, 2019 Posted September 23, 2019 A track would be nice to see what's going on. Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64) Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR >>MY MODS<< | Discord: Devrim#1068
joojoo Posted September 23, 2019 Author Posted September 23, 2019 I can sent a track but there are several mods in the mission
maxTRX Posted September 23, 2019 Posted September 23, 2019 I've had similar issue couple of times. The problem was silly ATC (Lockon era leftover). Now, I don't request any clearances before taxi or launch. I do set one of the radios to land/launch frequency (I set it to 127.500) and start taxiing when safe. As soon as "controller" starts repeating "hold position" over and over I switch to a different channel and ignore him. After hookup to the shuttle I go back to tower channel and the launch clearance comes in automatically. Launch bar switch to up, power to mil or full and...:pilotfly: This was the issue I've had, I'm sure there might be other problems.
Preendog Posted September 23, 2019 Posted September 23, 2019 +1. Never ask for clearance and never seen this bug.
Harker Posted September 23, 2019 Posted September 23, 2019 I saw this thread and funnily enough, I experienced it today for the first time. I was doing some CASE I training and hooked back to the catapult after landing on the carrier. Couldn't launch. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
Ziptie Posted September 24, 2019 Posted September 24, 2019 I saw this thread and funnily enough, I experienced it today for the first time. I was doing some CASE I training and hooked back to the catapult after landing on the carrier. Couldn't launch. Could it be due to the "bug" where you need to place wheel chocks and then remove them prior to take off from a carrier? The Grim Reapers actually found a work around for it, and ED posted it in there official updates post as a temporary workaround. Wondering if the pitching deck is taking effect and somehow causing an issue. If the issue is persistent for you, or any other. If you are hooked to the catapult to start the mission, press U to unhook, then retract the launch bar. Request wheel chocks and the request to remove. Extend launch bar, press U to hook back up to the catapult, then take off and try to land and launch again - see if that fixes your issue. Cheers, Don i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x1TB SSD drives (one solely for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, UH=1H, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria
Harker Posted September 24, 2019 Posted September 24, 2019 Could it be due to the "bug" where you need to place wheel chocks and then remove them prior to take off from a carrier? The Grim Reapers actually found a work around for it, and ED posted it in there official updates post as a temporary workaround. Wondering if the pitching deck is taking effect and somehow causing an issue. If the issue is persistent for you, or any other. If you are hooked to the catapult to start the mission, press U to unhook, then retract the launch bar. Request wheel chocks and the request to remove. Extend launch bar, press U to hook back up to the catapult, then take off and try to land and launch again - see if that fixes your issue. Cheers, DonGood to know, thanks. I didn't know there was a workaround. If it happens again, I'll try that. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
Stubbies2003 Posted September 25, 2019 Posted September 25, 2019 Could it be due to the "bug" where you need to place wheel chocks and then remove them prior to take off from a carrier? The Grim Reapers actually found a work around for it, and ED posted it in there official updates post as a temporary workaround. Wondering if the pitching deck is taking effect and somehow causing an issue. If the issue is persistent for you, or any other. If you are hooked to the catapult to start the mission, press U to unhook, then retract the launch bar. Request wheel chocks and the request to remove. Extend launch bar, press U to hook back up to the catapult, then take off and try to land and launch again - see if that fixes your issue. Cheers, Don Perhaps the problems could be intertwined but that video is for a temp fix on a completely different problem. I'm in the same boat (pun!) as Preendog. I've never asked for clearance and I've never seen this bug. It isn't for a lack of trapping and catapulting from carriers on my part.
Recommended Posts