SDsc0rch Posted April 25, 2020 Posted April 25, 2020 i was flying online last night with a buddy - i took all IR-MAVs and a TPOD he took MAVs + GBUs we both had difficulty manipulating the TDC slew i was trying to use the TPOD to cue the mavericks - ie.. find the target with the TPOD and then slewing the MAV to the target identified and designated by the TPOD but it was not intuitive you couldn't go back and forth between the MAV and the TPOD vis a vis TDC slew control also, i couldn't ever get the MAV triangle off the HUD in short, i got frustrated and just wanted to "start over" but i couldn't in summary... we should be able to switch SOI between TPOD and MAVs and not have any difficulty or confusion i apologize if this isn't a bug and its just the way the real jet works (( i looked in the three latest pages of bugs and haven't seen any posts on this subject - again, apologies if this has actually been covered )) i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
maxTRX Posted April 26, 2020 Posted April 26, 2020 (edited) i was flying online last night with a buddy - i took all IR-MAVs and a TPOD he took MAVs + GBUs we both had difficulty manipulating the TDC slew i was trying to use the TPOD to cue the mavericks - ie.. find the target with the TPOD and then slewing the MAV to the target identified and designated by the TPOD but it was not intuitive you couldn't go back and forth between the MAV and the TPOD vis a vis TDC slew control also, i couldn't ever get the MAV triangle off the HUD in short, i got frustrated and just wanted to "start over" but i couldn't in summary... we should be able to switch SOI between TPOD and MAVs and not have any difficulty or confusion i apologize if this isn't a bug and its just the way the real jet works (( i looked in the three latest pages of bugs and haven't seen any posts on this subject - again, apologies if this has actually been covered )) The way it works here, it's easier for me to if I stay on Tpod primarily. Fly in general direction of your target. Put your TDC on tpod, find the target (that's a separate subject;)), lock it. If you haven't uncaged the IrMAV beforehand switch your SOI to Mav screen and the mav will uncage and slew. Go back to Tpod. Now you can play with it. Put it in Ptrack on your target. If I have to move the TDC I re-designate. The Mav will update. One thing I noticed here, the Mav locks on the target sooner if its FOV is set to NAR. Once it locks and you're in range you get a firing solution... rifle. I hope it makes sense. Edited April 26, 2020 by Gripes323
SDsc0rch Posted April 26, 2020 Author Posted April 26, 2020 okay... i'll give it a try that way maybe that's the way its supposed to work : ) i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
Darcwaynard Posted April 26, 2020 Posted April 26, 2020 Once you lock your first target via TGP, switch SOI to mav and uncage. Then switch SOI back to TGP you should be able fire all 4 mavs with TGP as SOI. It's one of those things where you just need to learn the tricks to make it work. Its hella easier than doing the dance in the Hog that's for sure. Sent from my SM-A530W using Tapatalk [sIGPIC][/sIGPIC] Amd Fx 8350 4.3 GHz - MSi Gtx 1060 6gb - 16gb DDR3 A-10C - AV8B - F-5E - Mig-21 - FC3 - CA - UH-1H - Black Shark - AJ3-37 - M-2000C - F-16C Viper - F-86F - Spitfire - Fw-190 - F/A-18C - F-14 - Normandy - NTTR - Persian Gulf
SDsc0rch Posted April 26, 2020 Author Posted April 26, 2020 oh wow - that's really interesting i never got into the A-10 --- A-G is kinda new to me... i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 yeah no... just tried it --- this is reported as NO BUG i dispute that - i can't designate the MAV by using the TPOD i can't just SOI over to the MAV and control it from there desig the target from the TPOD, the MAV doesn't slew to the target only workaround is to completely turn off the TPOD and use the MAV only : / i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
maxTRX Posted April 27, 2020 Posted April 27, 2020 yeah no... just tried it --- this is reported as NO BUG i dispute that - i can't designate the MAV by using the TPOD i can't just SOI over to the MAV and control it from there desig the target from the TPOD, the MAV doesn't slew to the target only workaround is to completely turn off the TPOD and use the MAV only : / Once you have it designated on Tpod then SOI to Mav (uncage if it doesn't snap to your tgt.), if the Ir Mav doesn't react then something is not right on your side... I think. Have you checked your key assignments (cage/uncage)? It does work in this build, at least on my rig... and few others:)
Svsmokey Posted April 27, 2020 Posted April 27, 2020 Yeah , i have no probs designating/locking with tpod and -65f's as posted . 9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 Once you have it designated on Tpod then SOI to Mav (uncage if it doesn't snap to your tgt.), if the Ir Mav doesn't react then something is not right on your side... I think. Have you checked your key assignments (cage/uncage)? It does work in this build, at least on my rig... and few others:) okay.. will try again i know cage/uncage is mapped - it works on the TPOD i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 Yeah , i have no probs designating/locking with tpod and -65f's as posted . thx ---- kinda seems like its borked (?) difficulty with TDC control when you switch back and forth maybe i'm missing something here? but it should be more intuitive i'd like to challenge the [NO BUG] status that has been assigned to this report anyone know how i can do that?? i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
Darcwaynard Posted April 27, 2020 Posted April 27, 2020 Dont forget you have to press and hold tdc depress if you want to slew the mav. Sent from my SM-A530W using Tapatalk [sIGPIC][/sIGPIC] Amd Fx 8350 4.3 GHz - MSi Gtx 1060 6gb - 16gb DDR3 A-10C - AV8B - F-5E - Mig-21 - FC3 - CA - UH-1H - Black Shark - AJ3-37 - M-2000C - F-16C Viper - F-86F - Spitfire - Fw-190 - F/A-18C - F-14 - Normandy - NTTR - Persian Gulf
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 i've changed the setting in OPTIONS where i don't have to do that - i just move it normal when the TPOD is not in operation, i can control MAV just fine ED, instead of just dismissing this bug report, why don't you EXPLAIN what i'm doing wrong?!? i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
Svsmokey Posted April 27, 2020 Posted April 27, 2020 (edited) Soi to tpod -slew , then designate . Soi to mav-uncage Soi back to tpod and leave it there Rifle 1st mav Slew and designate tpod only to rifle each remaining mav. Try resetting the mav slew/designate to realistic For the tpod , you do not have to hold the designate button while slewing . Edited April 27, 2020 by Svsmokey 9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2
pimp Posted April 27, 2020 Posted April 27, 2020 It's not a bug. If you designated a target with the TPod, the Mav won't slew manually. You have to undesignate the TPod in order to slew the Mav. i9 14900k @5.6GHz NZXT Kraken |Asus ROG Strix Z790 A-Gaming | Samsung NVMe m.2 990 Pro 2TB | 64GB DDR5 6400MHz EVGA RTX 3090 FTW3 Ultra | PiMAX CRYSTAL LIGHT | HOTAS Warthog | Saitek Flight Pedals
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 Soi to tpod -slew , then designate . Soi to mav-uncage Soi back to tpod and leave it there Rifle 1st mav Slew and designate tpod only to rifle each remaining mav. Try resetting the mav slew/designate to realistic For the tpod , you do not have to hold the designate button while slewing . thx - i'll try this "again" i honestly thought i was doing that ----- when i desig'd with the TPOD, the mav did indeed slew, but NOT entirely to the target - it was slightly off - and nothing i did could get it to slew ON TO the target again, the operation here seems buggy i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
pimp Posted April 27, 2020 Posted April 27, 2020 You might need to create a new post about the slewing of the Mav is bugged. Because I do agree with that. It does snap to objects not even close to what you're trying to lock on to. However, working with the TPod, the Mav works fine. i9 14900k @5.6GHz NZXT Kraken |Asus ROG Strix Z790 A-Gaming | Samsung NVMe m.2 990 Pro 2TB | 64GB DDR5 6400MHz EVGA RTX 3090 FTW3 Ultra | PiMAX CRYSTAL LIGHT | HOTAS Warthog | Saitek Flight Pedals
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 you might be right i'll try people's suggestions again (later tonight? tomorrow? i've got a life...) and if its still wonky (( other ppl seem to be reporting difficulty also - so i'm pretty sure its not all just "me" )) i'll repost with a different name - like you suggest thx i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
maxTRX Posted April 27, 2020 Posted April 27, 2020 thx - i'll try this "again" i honestly thought i was doing that ----- when i desig'd with the TPOD, the mav did indeed slew, but NOT entirely to the target - it was slightly off - and nothing i did could get it to slew ON TO the target again, the operation here seems buggy Also, every time you have your target designated and Mav is on it or 'around' it, change Mav's FOV to narrow. It helps. You don't have to switch SOI from Tpod, Mav has priority. Another thing, if you have to correct your lock on Tpod and you slew around, make sure to press the desig. button (TDC). The Mav will jump over... at least it should;) Stabilize ypur flight path. If you wobble your wings the Mav's seeker will move a little, it 'should' always return to the target.
Darcwaynard Posted April 27, 2020 Posted April 27, 2020 This is a really good video on using the TGP and Mav F in tandem. If the maverick doesnt uncage automatically when you sensor select the mav page you can manually uncage and it should snap to the designated target. If you slew the TGP and hit TDC depress on another target the mav will snap to the new point. There shouldn't really be any reason to slew the mav manually if you are using the TGP. Hope this helps Also I could post a track later of how I quickly fire on 4 different targets using the TGP with Mav Fs. Cheers Sent from my SM-A530W using Tapatalk [sIGPIC][/sIGPIC] Amd Fx 8350 4.3 GHz - MSi Gtx 1060 6gb - 16gb DDR3 A-10C - AV8B - F-5E - Mig-21 - FC3 - CA - UH-1H - Black Shark - AJ3-37 - M-2000C - F-16C Viper - F-86F - Spitfire - Fw-190 - F/A-18C - F-14 - Normandy - NTTR - Persian Gulf
SDsc0rch Posted April 27, 2020 Author Posted April 27, 2020 thx guys - will attempt @darc.. i'm most definitely NOT seeing that behavior i7-4790K | Asus Sabertooth Z97 MkI | 16Gb DDR3 | EVGA GTX 980 | TM Warthog | MFG Crosswind | Panasonic TC-58AX800U [sIGPIC][/sIGPIC]
Recommended Posts