MrTInc71 Posted January 20, 2021 Share Posted January 20, 2021 Hi in contrary to the mission flown on YouTube, I have zero radio chatter whilst on the flight deck. In the pattern around WP1 I got asked ‘where are you’ despite I am flying with Hammer 11 next to me. No clearance to advance to Wp2... I have up after 3 attempts and the same result. Does anyone else experienced this bug??? Thank you Link to comment Share on other sites More sharing options...
baltic_dragon Posted January 21, 2021 Share Posted January 21, 2021 Hey, I'll check today, should be working as advertised. Link to comment Share on other sites More sharing options...
MrTInc71 Posted January 27, 2021 Author Share Posted January 27, 2021 (edited) Can msg you the track file. No radio comms on the deck at all!!!! Started the plane, radios on 1 (prim and aux) to start with...no chatter whatsoever! Edited January 27, 2021 by MrTInc71 Link to comment Share on other sites More sharing options...
baltic_dragon Posted January 27, 2021 Share Posted January 27, 2021 In M10 there should be a roll call - I’ll check. Link to comment Share on other sites More sharing options...
MrTInc71 Posted January 27, 2021 Author Share Posted January 27, 2021 I start the mission. When I played it first there was some tannoy announcement but no radio checks ( watched the YT mission bay Redkite) or any other radio chatter. Eventually some 15-30 min into the mission around WP 1 my lead asked me where I was.... Link to comment Share on other sites More sharing options...
MrTInc71 Posted January 27, 2021 Author Share Posted January 27, 2021 (edited) 3 hours ago, baltic_dragon said: In M10 there should be a roll call - I’ll check. trk file is 33MB..too large to attach here...bugger you could clearly seen then that absolute no comms are happening at all Edited January 27, 2021 by MrTInc71 update Link to comment Share on other sites More sharing options...
baltic_dragon Posted January 27, 2021 Share Posted January 27, 2021 I’ll check on my end, no worries! Link to comment Share on other sites More sharing options...
MrTInc71 Posted January 28, 2021 Author Share Posted January 28, 2021 Any updates please Baltic? Link to comment Share on other sites More sharing options...
baltic_dragon Posted January 28, 2021 Share Posted January 28, 2021 Just checked, works for me as advertised. Did you - as instructions say - wait a few seconds as a spectator before jumping into the pit (choosing the slot)? Link to comment Share on other sites More sharing options...
MrTInc71 Posted January 29, 2021 Author Share Posted January 29, 2021 (edited) I did wait until the window opens and advised me to choose my slot. However, I will wait longer then and see whether this makes a difference, thank you Edited January 29, 2021 by MrTInc71 update Link to comment Share on other sites More sharing options...
DimSim Posted July 10, 2021 Share Posted July 10, 2021 Played Mission 10 today. I too noticed no comms or radio check at start of mission. First radio message was Cajun calling me to formation. I went to YouTube to see RedKite's start and saw lots of radio check and mission start dialogue. I could have done something wrong, but came here to see if anyone else had the same. Also got a call during egress 'Contact Knight for AAR <Press Space>'. I could not see Knight on the radio preset list. That was followed by 'Flip: We have enough fuel to head straight to Mother'. Additionally, I tried to configure TACAN to Cajun's 50X AA setting but never got a lock so ended up using F10 map to find him. Link to comment Share on other sites More sharing options...
baltic_dragon Posted July 11, 2021 Share Posted July 11, 2021 Hey! For the initial radios - I will double check. For Knight - you should use the Strike Common freq (IIRC), but I will look it up too. For TACAN - the way it works now is as in real life - you need to set the channel 63 higher (or lower) than the aircraft you want to see, so in this case 113X. Link to comment Share on other sites More sharing options...
DimSim Posted July 11, 2021 Share Posted July 11, 2021 (edited) Thanks BD, and I wish I'd known about the TACAN earlier. EDIT: Just tried loading the mission via Editor: No comms at start again. EDIT: On reading more, it looks like I can only get range information via TACAN, so not as useful as I'd hoped. The TACAN keeps spinning as if not located beacon but the range on HUD appears to be correct. Edited July 11, 2021 by DimSim Link to comment Share on other sites More sharing options...
baltic_dragon Posted July 11, 2021 Share Posted July 11, 2021 This is how TACAN works between two fighters in real life too, you only get the distance. Link to comment Share on other sites More sharing options...
baltic_dragon Posted July 12, 2021 Share Posted July 12, 2021 @DimSim I just ran the mission, all worked as advertised. Do you choose "spectators" at mission start and enter the pit only when prompted by the text message? And do you have your Easy Comms set to off? Link to comment Share on other sites More sharing options...
DimSim Posted July 14, 2021 Share Posted July 14, 2021 (edited) On 7/13/2021 at 6:26 AM, baltic_dragon said: @DimSim I just ran the mission, all worked as advertised. Do you choose "spectators" at mission start and enter the pit only when prompted by the text message? And do you have your Easy Comms set to off? This time I chose spectate and joined late as prompted. Made no difference, still no radio comms. Easy Comms are off (always off since playing BD's campaigns!) Tested from Mission Editor. Previous tests (and first play) I did not do the spectator sequence. The document says to try that if game performs poorly. Game is running fine and fast, so I didn't consider it. Previous test (before this one), the first radio message I heard may have been 'Switch Strike'. Edited July 14, 2021 by DimSim Link to comment Share on other sites More sharing options...
ruprecht Posted August 23, 2021 Share Posted August 23, 2021 Same with me. Played tonight, no comms until Cajun chewed me out inbound. The takeoff times on the kneeboard are really out. Especially with no comms, I just assumed we'd try to keep those times, but I ended up on a cat with a moonshadow stuck behind me, the rest of my flight still parked and had to orbit at WP1 for them to catch up. Fun times though, and loving the CAT III practice. DCS Wishlist: | Navy F-14 | Navy F/A-18 | AH-6 | Navy A-6 | Official Navy A-4 | Carrier Ops | Dynamic Campaign | Marine AH-1 | Streaming DCS sometimes: Link to comment Share on other sites More sharing options...
baltic_dragon Posted September 1, 2021 Share Posted September 1, 2021 I just lauched the mission again and i had the radio checks once I launched the engine. I really don't understand why it does not work for some and does for others. Could someone post track from mission start? Link to comment Share on other sites More sharing options...
Recommended Posts