Orestd Posted February 4, 2021 Posted February 4, 2021 I did that there was an update but the campaign is the way it was. I still cannot get into the task manager and be able to switch the tasks. And the icon are the same as they where not X with a circle around them as in the video.
Orestd Posted February 4, 2021 Posted February 4, 2021 I did the update. Did a system reboot even restarted the campaign it is still the way it was before. Cannot get in to assign individual tasks. Also I changed the labels in the options from full to dot. but in the campaign they are still full. So that change had no effect. Waiting for your reply. Thank you.
gregzagk Posted February 4, 2021 Posted February 4, 2021 4 hours ago, Orestd said: I did the update. Did a system reboot even restarted the campaign it is still the way it was before. Cannot get in to assign individual tasks. Also I changed the labels in the options from full to dot. but in the campaign they are still full. So that change had no effect. Waiting for your reply. Thank you. Hi, please check the new manual or the instructions in the map (blue letters in the mission planner). You don't have to assign tasks anymore through the mission planner. You can change payload, design your waypoints and once ready you can jump into your cockpit and assign tasks from there. There is a dialogue that will guide you. We had to change the process as the zones would not be visible for you. Les us know once it works out for you. Greg "ARGO" DCS UH-1H DLC SP Campaign 373vFS DCS World squadron (Greece) - www.buddyspike.net "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP
leo2510 Posted February 4, 2021 Posted February 4, 2021 Hi, I just tried Mission 1 and I wanted to refuel. When my wingman just collided with me... Do we have to use DCS Comm for refuelling ? Leo
Orestd Posted February 5, 2021 Posted February 5, 2021 I think you are supposed to order your wingman to refuel in the F10 menu. You know you can skip the refueling.. 1
petritis Posted February 5, 2021 Posted February 5, 2021 6 hours ago, leo2510 said: Hi, I just tried Mission 1 and I wanted to refuel. When my wingman just collided with me... Do we have to use DCS Comm for refuelling ? Leo You can order your wingman to hit the tanker. Through radio menu choose wingman->Go to..->Tanker. "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP "ARGO" DCS UH-1H DLC SP Campaign
zildac Posted February 5, 2021 Posted February 5, 2021 1 hour ago, petritis said: You can order your wingman to hit the tanker. Through radio menu choose wingman->Go to..->Tanker. Oddly I never see this message only the "do not skip" message when I'm at the point where I can choose to refuel. I'll try again later. 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
petritis Posted February 5, 2021 Posted February 5, 2021 Just now, zildac said: Oddly I never see this message only the "do not skip" message when I'm at the point where I can choose to refuel. I'll try again later. Once you choose the option that want want refuel a message will appear telling you that you can order your wingman to hit the tanker. Of course this option is a DCS built in option, you can order him to do various staff such as, go to tanker, return to base or resume mission. For this mission you need to order him to go to tanker. Also in order to get fuel you need to tune to tanker's Freq and ask for refueling. "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP "ARGO" DCS UH-1H DLC SP Campaign
zildac Posted February 5, 2021 Posted February 5, 2021 1 minute ago, petritis said: Once you choose the option that want want refuel a message will appear telling you that you can order your wingman to hit the tanker. Of course this option is a DCS built in option, you can order him to do various staff such as, go to tanker, return to base or resume mission. For this mission you need to order him to go to tanker. Also in order to get fuel you need to tune to tanker's Freq and ask for refueling. Thanks, understood. I need to double check but I'm pretty sure all of those options were greyed out, specifically the wingman option. I'll try again later this eve and see. So do COM1 and COM2 need to be tuned to flight and the tanker frequencies respectively for those options NOT to be greyed out? 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
leo2510 Posted February 5, 2021 Posted February 5, 2021 Thanks for your replies, I'll give it a go ! About labels and radio: I have in my local option: Labels: Dot Only and Radio Assist. OFF Everytime I launch the campaign I have full labels au radio assist ON ? How can I change that ? Thanks Leo 1
zildac Posted February 5, 2021 Posted February 5, 2021 Thanks for your replies, I'll give it a go ! About labels and radio: I have in my local option: Labels: Dot Only and Radio Assist. OFF Everytime I launch the campaign I have full labels au radio assist ON ? How can I change that ? Thanks LeoI was going to ask the same question 1 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
leo2510 Posted February 5, 2021 Posted February 5, 2021 Ok I went to have a look at the mission 1 in Mission editor: It's in French but first line is: Labels -> Full and 8th Line is Radio Assist: ON Thing is I cannot save modification to the mission... There should be a way to fix this, radio assist is really horrible for the campaign as it keeps changing the M channel of radio 2 Labels are ennoying too Leo
gregzagk Posted February 5, 2021 Posted February 5, 2021 30 minutes ago, leo2510 said: Ok I went to have a look at the mission 1 in Mission editor: It's in French but first line is: Labels -> Full and 8th Line is Radio Assist: ON Thing is I cannot save modification to the mission... There should be a way to fix this, radio assist is really horrible for the campaign as it keeps changing the M channel of radio 2 Labels are ennoying too Leo Thanks for your purchase and feedback. It's strange cause on my side it's free selection for Labels and the radio too. I will go through again and re-save to be sure. Greg "ARGO" DCS UH-1H DLC SP Campaign 373vFS DCS World squadron (Greece) - www.buddyspike.net "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP
zildac Posted February 5, 2021 Posted February 5, 2021 59 minutes ago, leo2510 said: Ok I went to have a look at the mission 1 in Mission editor: It's in French but first line is: Labels -> Full and 8th Line is Radio Assist: ON Thing is I cannot save modification to the mission... There should be a way to fix this, radio assist is really horrible for the campaign as it keeps changing the M channel of radio 2 Labels are ennoying too Leo Can confirm mine are also enforced 1 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
Orestd Posted February 5, 2021 Posted February 5, 2021 (edited) In the options menu game play tab in the welcome screen change from full to dot. the ships will have full but the air craft and ground units will be dot. You cannot change it in the mission editor since the save and save as have been disabled. Edited February 5, 2021 by Orestd
zildac Posted February 5, 2021 Posted February 5, 2021 (edited) 47 minutes ago, Orestd said: In the options menu game play tab in the welcome screen change from full to dot. the ships will have full but the air craft and ground units will be dot. You cannot change it in the mission editor since the save and save as have been disabled. Doesn't seem to behave that way for me. I already have "DOT" set in the gameplay menu but I see full labels for all objects, and given that "ENFORCE" is set in the miz that's what I would expect tbh. Edited February 5, 2021 by zildac 1 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
leo2510 Posted February 5, 2021 Posted February 5, 2021 ALthough labels are ennoying I can live with it But the radio assist is really something that needs to be fix IMO Leo 1
leo2510 Posted February 5, 2021 Posted February 5, 2021 Also it looks like in mission 2 (first dynamic mission) COMM1 and COMM 2 presents are inverted between the aircraft and kneeboard. What kneeboard says to be COMM2 Presets is on Radio 1 and Vice Versa Leo 1
gregzagk Posted February 5, 2021 Posted February 5, 2021 21 minutes ago, leo2510 said: Also it looks like in mission 2 (first dynamic mission) COMM1 and COMM 2 presents are inverted between the aircraft and kneeboard. What kneeboard says to be COMM2 Presets is on Radio 1 and Vice Versa Leo Thanks fixed and should be available in next update. About labels and radio. It's only for mission 1 right? Or do you have full labels and easy radio in the second mission too? I think it's a version issue as the latest that I have seems fine. Thanks again Greg 1 "ARGO" DCS UH-1H DLC SP Campaign 373vFS DCS World squadron (Greece) - www.buddyspike.net "ARGO 2.0 Project Phoenix" UH-1H DLC Campaign - WIP
Orestd Posted February 5, 2021 Posted February 5, 2021 (edited) No everything is in dot. I just am going to try easy communications see if it works. . Edited February 5, 2021 by Orestd 1
leo2510 Posted February 5, 2021 Posted February 5, 2021 2 hours ago, gregzagk said: Thanks fixed and should be available in next update. About labels and radio. It's only for mission 1 right? Or do you have full labels and easy radio in the second mission too? I think it's a version issue as the latest that I have seems fine. Thanks again Greg just did mission 2 and all my 'issues' disappear ! strugling with managing the AI but that's another issue
Orestd Posted February 5, 2021 Posted February 5, 2021 (edited) Ok I have a question. Doing mission 3. I am to destroy a munitions warehouse belonging to a gun runner. Now the coordinates I am given at the end of mission 2 I don't think are the coordinates of the warehouse. The buildings I bombed look like appt. buildings. I maybe in putting the coordinates incorrectly. coordinates are 42 23 33.55783 N 42 21 15.75781 E. Now I take it that those are in the F-18 format. So in my flight computer I input 42 23 33.55 N 42 21 15.75 E Is that correct. Also when I input the MGRS They do not match those coordinates ? Also why are we not given the elevation of the target? I input 0 not sure if that is correct. Please remember I am a Newbie.Thank you. Edited February 6, 2021 by Orestd
Orestd Posted February 6, 2021 Posted February 6, 2021 I tried the MGRS coordinates they make no sense at all. I don't know what I am doing wrong. Just a suggestion for us newbies it would probably help if the target was marked on the f10 map. We can find our own coordinates and head right for the target. This way we have no idea where we are going. Trying to find the coordinates on the map as the video shows is very time consuming and awkward if you are not that familiar with longitude and latitudes. I notice there is a JTAC option in the F10 menu. I will try the JTAC and see if the coordinates he gives me will take me to the target.
Orestd Posted February 6, 2021 Posted February 6, 2021 Nope the JTAC takes me to a target but not the one I want.. I am totally lost.
Recommended Posts