Ryeman Posted October 20, 2021 Share Posted October 20, 2021 So it looks like todays patch broke a whole host of commands. I can't get a single Supercarrier command to work. Also some AIRRIO commands are not working, most notably the Jester Options command that just crashes VA and Viacom all together. Just an FYI since I know Hollywood doesn't usually update until the patch goes stable. 1 Link to comment Share on other sites More sharing options...
Slack Mouse Posted October 20, 2021 Share Posted October 20, 2021 1 hour ago, Ryeman said: So it looks like todays patch broke a whole host of commands. I can't get a single Supercarrier command to work. Also some AIRRIO commands are not working, most notably the Jester Options command that just crashes VA and Viacom all together. Just an FYI since I know Hollywood doesn't usually update until the patch goes stable. I just flew a Supercarrier Case 1 and all the voice commands worked, didn't try Case 2/3 but had no issues. If you are trying to use the Supercarrier commands on the new Forrestal it doesn't have the advanced supercarrier logic, its just simple like the Stennis. 1 Link to comment Share on other sites More sharing options...
bonesvf103 Posted October 21, 2021 Share Posted October 21, 2021 Supercarrier commands such as Salute don't work. I also called the ball and it responded that it wasn't a Supercarrier carrier even though I was landing on the Lincoln. v6, boNes 1 "Also, I would prefer a back seater over the extra gas any day. I would have 80 pounds of flesh to eat and a pair of glasses to start a fire." --F/A-18 Hornet pilot Link to comment Share on other sites More sharing options...
makosch Posted October 21, 2021 Share Posted October 21, 2021 Thank god I thought it was just me I can confirm that the Salute Command for the Tomcat does not work. It recognizes the keyword but does not execute the command. For the Hornet everything works just fine for me. cheers Rampart Link to comment Share on other sites More sharing options...
BoFrost Posted October 22, 2021 Share Posted October 22, 2021 vor 17 Stunden schrieb makosch: Thank god I thought it was just me I can confirm that the Salute Command for the Tomcat does not work. It recognizes the keyword but does not execute the command. For the Hornet everything works just fine for me. cheers Rampart Same here. System: Asus ROG STRIX X570 , Ryzen 9 5900X , ASUS ROG STRIX LC 240 , 64 GB GSkill 3200 Trident Z , Powercolor Red Devil RX 6900 XT , Running SSD only Input: Thrustmaster HOTAS Warthog , Saitek Pro Flight Rudder Pedals , Track IR 5, VoiceAttac with Vaicom Pro, HP Reverb G2 DCS Open Beta , Nevada NTTR Map, Persian Gulf Map , Syria Map, F-14 Tomcat , F/A-18C Hornet , F-16 Viper, AV-8B Harrier, Supercarrier Link to comment Share on other sites More sharing options...
makosch Posted October 22, 2021 Share Posted October 22, 2021 23 hours ago, makosch said: Thank god I thought it was just me I can confirm that the Salute Command for the Tomcat does not work. It recognizes the keyword but does not execute the command. For the Hornet everything works just fine for me. cheers Rampart @BoFrost Can you tell me if RIO Command open Canopy works for you? Again same behaviour, VAICOM recognizes and executes but no action. Link to comment Share on other sites More sharing options...
BoFrost Posted October 23, 2021 Share Posted October 23, 2021 vor 14 Stunden schrieb makosch: @BoFrost Can you tell me if RIO Command open Canopy works for you? Again same behaviour, VAICOM recognizes and executes but no action. Yeah, just checked that too, and yes, it is not working. I can see that the command is recognized, but nothing happens. I checked with SC and "normal" Carrier, A-Model and B-Model, all the same. Also on non SC Carrier the "Request Launch" is not working. For now I just added two commands to Voice Attack then until this error is resolved. (Line up = Request Launch, and Take off = Salute) at least this workaround is good until it is resolved. Cheers Frank 2 System: Asus ROG STRIX X570 , Ryzen 9 5900X , ASUS ROG STRIX LC 240 , 64 GB GSkill 3200 Trident Z , Powercolor Red Devil RX 6900 XT , Running SSD only Input: Thrustmaster HOTAS Warthog , Saitek Pro Flight Rudder Pedals , Track IR 5, VoiceAttac with Vaicom Pro, HP Reverb G2 DCS Open Beta , Nevada NTTR Map, Persian Gulf Map , Syria Map, F-14 Tomcat , F/A-18C Hornet , F-16 Viper, AV-8B Harrier, Supercarrier Link to comment Share on other sites More sharing options...
Jayhawk1971 Posted October 23, 2021 Share Posted October 23, 2021 vor 4 Stunden schrieb BoFrost: Yeah, just checked that too, and yes, it is not working. I can see that the command is recognized, but nothing happens. Same. Link to comment Share on other sites More sharing options...
makosch Posted October 25, 2021 Share Posted October 25, 2021 Thanks for the feedback guys. Its good to know that its not my VAICOM install thats porked I guess Ill do the same as @BoFrost and wait for @Hollywood_315 to release an update/patch. peace out and check six Ramp Link to comment Share on other sites More sharing options...
KUFNUKEM Posted November 12, 2021 Share Posted November 12, 2021 Hey, anyone knows an status about fixing this issues? thx System: MSI MPG Z690 EDGE WIFI / I9-13900K @5.6 AC / Custom Loop Watercooling / MSI 4090 SUPRIM X / 2x 16 GB DDR4@4100 MHZ/ Varjo AERO / Thrustmaster Warthog Throttle / Thrustmaster Cougar MFD (3x) / VPC MongoosT-50CM2 Base / MFG CROSSWIND V3 / DOF Reality P3 Motion Sim Moduls: F18, F14, F16, A10CII, AV8B, UH-1, AH-64, P51, P47, Super Carrier, All Maps Link to comment Share on other sites More sharing options...
Lt_Jaeger Posted November 12, 2021 Share Posted November 12, 2021 There is a new version. The only command I tested so far is target size, which works again. Link to comment Share on other sites More sharing options...
sneo Posted November 15, 2021 Share Posted November 15, 2021 switching Attack Mode is not working (not game-breaking but annoying to switch to RIO to change mode) as of the update 15NOV. Link to comment Share on other sites More sharing options...
Al-Azraq Posted January 2, 2022 Share Posted January 2, 2022 For me ‘See you at ten’ and ‘Tomcat ball’ are not working for the Forrestal. VA just says “Recipient is not Supercarrier’. i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2 Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3 Persian Gulf | Nevada | Normandy | The Channel | Syria Link to comment Share on other sites More sharing options...
RedeyeStorm Posted January 2, 2022 Share Posted January 2, 2022 @Al-Azraq that would be correct behavior. The Forrestal and Stennis do not have the Supercarrier commands. Link to comment Share on other sites More sharing options...
Al-Azraq Posted January 2, 2022 Share Posted January 2, 2022 2 hours ago, RedeyeStorm said: @Al-Azraq that would be correct behavior. The Forrestal and Stennis do not have the Supercarrier commands. But still have the ATC and the ball call plus LSO comms like in the Supercarrier. Is there any workaround here? i7 12700KF | MSI Z690 A-PRO | Corsair Vengeance 2x16 gb @ 3200 Mhz | RTX 3070 Ti FE | Acer XB271HU 1440P 144HZ | Virpil T-50 CM throttle | Virpil WarBRD Base + MongoosT-50 CM2 Grip | MFG Crosswind | TrackIR 5 | HP Reverb G2 Bf 109 K-4 | Fw 190 A-8 | Spitfire LF Mk. IX | P-51D | Fw 190 D-9 | P-47D | Mosquito FB VI | F/A 18C | F-14 A/B | F-16C | MiG-15bis | MiG-21bis | M-2000C | A-10C | AJS-37 Viggen | UH-1H | Ka-50 | Mi-24P | C-101 | Flaming Cliffs 3 Persian Gulf | Nevada | Normandy | The Channel | Syria Link to comment Share on other sites More sharing options...
Recommended Posts