Ghostmaker Posted January 17 Share Posted January 17 Ah not good. So when im in the clouds and an aircraft is about 60 + meters away its not crisp. I want to sharpen that up more if you have any ideas ? Link to comment Share on other sites More sharing options...
speed-of-heat Posted January 17 Share Posted January 17 Turn on sharpening?... Honestly it's a headset limitation, great clarity in the sweet spot... Not so everything else... I found I turned my head a lot 1 SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Ghostmaker Posted January 18 Share Posted January 18 I think i have open xr sharpening on 100% Dcs settings dlss on & ultra performance Sharpening on 0.6 SSS - ON SSAO - ON SSLR - ON Dcs Vr pixel density set to 1.5 Dcs Vr setting Msaa mask size??? Link to comment Share on other sites More sharing options...
Ghostmaker Posted January 19 Share Posted January 19 Do you know if any of the sharpening settings or the settings above fght each other or is one best turned down whilst the other is turned up Link to comment Share on other sites More sharing options...
speed-of-heat Posted January 19 Share Posted January 19 dear god ... On 1/18/2024 at 6:28 AM, Ghostmaker said: I think i have open xr sharpening on 100% Dcs settings dlss on & ultra performance Sharpening on 0.6 SSS - ON SSAO - ON SSLR - ON Dcs Vr pixel density set to 1.5 Dcs Vr setting Msaa mask size??? switch your pixel density back to 1.0 for a start (that's 14m pixels in total per eye you are trying to drive ( you genuinely can't drive that many pixels with any performance) ... turn off SSAO and SSLR , only sharpen in one place either in OXRTK or in DCS (I suggest DCS) compared to running a PD of 1 and DLSS off which is driving 9m pixels per eye... MSAA mask size has no practical effect for performance SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Ghostmaker Posted January 19 Share Posted January 19 My msaa is at 0.6 i havnt touched this as i dont know what it does? Ok so i shall change settings to DLSS -on Dcs shapening to max? Or mess with? And turn OXRTK sharpening to 0 / off SSAO - OFF SSLR- OFF Vr pixel density set to - 1 (I suggest DCS) compared to running a PD of 1 and DLSS off which is driving 9m pixels per eye... sorry bud, im getting confused with this part lol Link to comment Share on other sites More sharing options...
plott1964 Posted January 26 Share Posted January 26 Here's my problem: I use an HP Reverb G2 (v2). I primarily use this device playing DCS. The problem I am having is that over time the performance is degraded (stutters, freezing, etc...) to the point that I have to restart the computer so I can continue flying. What would be the main cause of this loss in performance? BTW - this has really just started in the last month or so. Not sure if the setup or some other reason. PC specs: Intel Core i7-13700K [Raptor Lake 3.4GHz Sixteen-Core LGA 1700] (stock clock)/64.0 GB RAM/RTX 3080 GPU (stock clock)/Windows 10 Home/SSD Drives/T.Flight HOTAS X/HP Reverb G2 Link to comment Share on other sites More sharing options...
speed-of-heat Posted January 26 Share Posted January 26 15 minutes ago, plott1964 said: Here's my problem: I use an HP Reverb G2 (v2). I primarily use this device playing DCS. The problem I am having is that over time the performance is degraded (stutters, freezing, etc...) to the point that I have to restart the computer so I can continue flying. What would be the main cause of this loss in performance? BTW - this has really just started in the last month or so. Not sure if the setup or some other reason. PC specs Intel i7-3770K CPU @ 3.50GHz/32.0 GB/RTX 3080/Windows 10 Home/SSD Drives/T.Flight Hotas X/HP Reverb G2 try forcing the single thread version, if your processor in your signature is accurate, i don't think it will like the MT version .... SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
plott1964 Posted January 26 Share Posted January 26 (edited) I doubled checked and the specs are i7-13700K Raptor Lake 3.4GHz Sixteen-Core, MSI - B660 MAG Mortar microATX Motherboard, Ripjaws V64GB (2 x 32GB) DDR4-3600 RAM. I've been playing OB/MT for months with the Reverb G2 with no issues until lately. Also did some troubleshooting back in May 2023 with ED support (Alexander) and he was who suggested OB/MT. Quote Also we recommend you to test our DCS OpenBeta with a multi-threaded version check here: https://www.digitalcombatsimulator.com/en/news/changelog/openbeta/2.8.3.37556/ Edited January 26 by plott1964 PC specs: Intel Core i7-13700K [Raptor Lake 3.4GHz Sixteen-Core LGA 1700] (stock clock)/64.0 GB RAM/RTX 3080 GPU (stock clock)/Windows 10 Home/SSD Drives/T.Flight HOTAS X/HP Reverb G2 Link to comment Share on other sites More sharing options...
speed-of-heat Posted January 26 Share Posted January 26 okay that makes more sense SYSTEM SPECS: Hardware Intel Corei7-12700KF @ 5.1/5.3p & 3.8e GHz, 64Gb RAM, 4090 FE, Dell S2716DG, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO YOUTUBE CHANNEL: @speed-of-heat Link to comment Share on other sites More sharing options...
Steel Jaw Posted February 18 Share Posted February 18 Enabling Turbo Mode now crashes DCS immediately, also the closing timer on the Open XR overlay disappeares as soon as I enable Turbo Mode. "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, ASUS RTX3060ti/8GB. Link to comment Share on other sites More sharing options...
Ghostmaker Posted February 21 Share Posted February 21 Mine seems to work ok Link to comment Share on other sites More sharing options...
zildac Posted February 21 Share Posted February 21 Enabling Turbo Mode now crashes DCS immediately, also the closing timer on the Open XR overlay disappeares as soon as I enable Turbo Mode.Are you using quad views foveated? 12900KF | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 5200 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero Link to comment Share on other sites More sharing options...
Steel Jaw Posted February 22 Share Posted February 22 Resetting openxr fixed it 1 "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, ASUS RTX3060ti/8GB. Link to comment Share on other sites More sharing options...
Recommended Posts