VladimirSputnik Posted July 27, 2022 Posted July 27, 2022 I noticed that the following bindings to the keyboard and HOTAS Warthog for knobs and multi-selectors only go to fully right and fully left. It seems impossible to select any options in between: [Program selector switch - Clockwise] [Program selector switch - Counterclockwise] [Function selector switch - Clockwise] [Function selector switch - Counterclockwise] [TACAN mode selector - Clockwise] [TACAN mode selector - Counterclockwise] [Radar control stick scale selection - RIGHT] Goes directly to 7 nm [Radar control stick scale selection - LEFT] Goes directly to 60 nm [Radar control stick scan selection - LEFT] Goes to 60 [Radar control stick scan selection - RIGHT] Goes to a blank position to the right of 30 [Heading and vertical reference system control switch - Clockwise] [Heading and vertical reference system control switch - Counterclockwise] [Frequency select thumbwheel - Hundreds - Increase] and all the different digit selectors Then these are very sensitive and if you do not press and release the button superfast it will jump 2 or 3 channels: [V/UHF control unit channel selector - Clockwise] [V/UHF control unit channel selector - Counterclockwise] [V/UHF control unit function selector - Clockwise] [V/UHF control unit function selector - Counterclockwise] [Omnibearing selector - Clockwise] and Counterclockwise skips digits - turns too fast to select 1 1
Flappie Posted July 27, 2022 Posted July 27, 2022 It was reported internally yesterday. But thanks for reporting anyway. If you find anything missing in my list, please tell me so. 1 hour ago, VladimirSputnik said: Then these are very sensitive and if you do not press and release the button superfast it will jump 2 or 3 channels: [V/UHF control unit channel selector - Clockwise] [V/UHF control unit channel selector - Counterclockwise] [V/UHF control unit function selector - Clockwise] [V/UHF control unit function selector - Counterclockwise] [Omnibearing selector - Clockwise] and Counterclockwise skips digits - turns too fast to select These, I haven't reported yet. 2 1 ---
Flappie Posted August 11, 2022 Posted August 11, 2022 (edited) On 7/27/2022 at 5:32 PM, VladimirSputnik said: Then these are very sensitive and if you do not press and release the button superfast it will jump 2 or 3 channels: [V/UHF control unit channel selector - Clockwise] [V/UHF control unit channel selector - Counterclockwise] [V/UHF control unit function selector - Clockwise] [V/UHF control unit function selector - Counterclockwise] [Omnibearing selector - Clockwise] and Counterclockwise skips digits - turns too fast to select First four should be fixed by the next OB update. Omnibearing selector issues reported (the knob does not rotate visually either). Edited August 11, 2022 by Flappie ---
VladimirSputnik Posted February 15, 2023 Author Posted February 15, 2023 Thanks, all seems to be working well 1
Adder_69 Posted September 16, 2023 Posted September 16, 2023 is there a dcs glossary its taken me here to under what CCW and CW mean. Now what about OB? I know SOB 1
MAXsenna Posted September 17, 2023 Posted September 17, 2023 3 hours ago, Adder_69 said: is there a dcs glossary its taken me here to under what CCW and CW mean. Now what about OB? I know SOB They are not DCS/ED abbreviations except for OB, OpenBeta. CCW, counter clockwise, "left turn". CW, clockwise, "right turn". The forum bot didn't censor the last one?
Recommended Posts