Nealius Posted February 1, 2023 Posted February 1, 2023 With the Warthog throttle in cutoff position, moving the throttle out of cutoff into idle unlocks the F1's throttle lever but does not move the throttle into idle. The Warthog throttle must be returned to cutoff position for the F1 throttle to be in idle. Now you have the physical throttle in cutoff and virtual throttle in idle. Moving the Warthog throttle out of cutoff and into idle should unlock the throttle lever AND put the throttle to idle in one motion, as it did at initial release of the CE. 5
lemoen Posted February 14, 2023 Posted February 14, 2023 I have a similar problem with the Virpil CM3. When the throttle is in cutoff, it "holds" the cut-off button and releases it the moment you move the throttle forward. Seems to be only an issue in the EE, I have to click the throttle in the cockpit to move it to idle then move my throttle to match. 2
some1 Posted April 27, 2023 Posted April 27, 2023 Now it's broken in CE too. Can we get a simple Throttle OFF and IDLE shortcuts like is the standard for other DCS modules? The current implementation is not usable with any throttle I'm familiar with (Warthog, Virpil, Winwing). 4 Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
Raven (Elysian Angel) Posted August 2, 2023 Posted August 2, 2023 (edited) On 4/27/2023 at 6:27 PM, some1 said: Can we get a simple Throttle OFF and IDLE shortcuts like is the standard for other DCS modules? BUMP Yes please. I just returned to this module and I can't even get it started up. It's what people call a "quit moment": quite frustrating indeed... Edited August 2, 2023 by Raven (Elysian Angel) typo 2 Spoiler Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings Win11 Pro 24H2 - VBS/HAGS/Game Mode ON
flyingcyrus Posted September 8, 2023 Posted September 8, 2023 +1 ! Huge frustration as well... 10700K / 4090 / 32Go / 34" curved Gigabyte / Reverb G1 / Thrustmaster hardware among other harderware things. I find your lack of FPS disturbing... C8<]
Vibora Posted January 10, 2024 Posted January 10, 2024 We fixed it and will probably be included in next OB update. 2 1 Roberto "Vibora" Seoane Alas Rojas [sIGPIC][/sIGPIC]
Raven (Elysian Angel) Posted January 10, 2024 Posted January 10, 2024 Thank you kindly! Spoiler Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings Win11 Pro 24H2 - VBS/HAGS/Game Mode ON
NoPro Posted January 10, 2024 Posted January 10, 2024 7 hours ago, Vibora said: We fixed it and will probably be included in next OB update. Does this mean we will get two bindings? One for „off“ and one for „on“? Or just fixed the current binding? cheers
Vibora Posted January 10, 2024 Posted January 10, 2024 You will get these bindings: Throttle Cut/Idle switch - toggle Cut/Idle Throttle Cut/Idle switch - Cut Throttle Cut/Idle switch - Idle Throttle Cut/Idle switch - Cut while held pressed You will need to use the latter one for the Warthog. 3 Roberto "Vibora" Seoane Alas Rojas [sIGPIC][/sIGPIC]
NoPro Posted January 10, 2024 Posted January 10, 2024 28 minutes ago, Vibora said: You will get these bindings: Throttle Cut/Idle switch - toggle Cut/Idle Throttle Cut/Idle switch - Cut Throttle Cut/Idle switch - Idle Throttle Cut/Idle switch - Cut while held pressed You will need to use the latter one for the Warthog. I do use a Winwing Orion 2. I have two buttons so I can use the “cut” and “idle” binding. Thanks for your quick reply and effort to solve this issue . Cheers. 1
Vibora Posted January 10, 2024 Posted January 10, 2024 You're welcome. Roberto "Vibora" Seoane Alas Rojas [sIGPIC][/sIGPIC]
Recommended Posts