Comrade14 Posted February 22, 2023 Posted February 22, 2023 As the title says, after echo 3 calls for help and you say you can help it says to contact warrior for the nine-line. Tried using every channel available (142.3, 255.5) but he doesn't respond.
hahawin Posted March 8, 2023 Posted March 8, 2023 I experienced the same issue today on the stable branch (with the original a10c module, not the a10c II), I’m guessing it’s related to the issue with ATC as the mission seems to be using the default dcs JTAC functionality. This actually breaks the mission as I can’t progress.
baltic_dragon Posted March 14, 2023 Posted March 14, 2023 It will all be fixed hopefully with next update, I am running a full overhaul of the campaign (on M16 now), fixing a lot of comms bugs and other smaller problems. 1 For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
arneh Posted December 2, 2023 Posted December 2, 2023 I ran into the same issue now, 8 months later. No reply from Warrior.
Pyrocumulous Posted December 3, 2023 Posted December 3, 2023 On 12/2/2023 at 8:56 AM, arneh said: I ran into the same issue now, 8 months later. No reply from Warrior. Warrior read the 9-line for me today on DCS 2.9.1.48335 Open Beta MT. Be sure to use the JTAC comm menu with the ARC 186 radio tuned to 42.3 FM. Warthog HOTAS, VMAX Prime Throttle, TPR pedals, Kensington Slimblade Pro, Pimax Crystal, RTX 4090 FE, Asus ProArt X670E-Creator, Ryzen 7950X3D, 64gb DDR5.
Delta Kilo Posted December 30, 2023 Posted December 30, 2023 Hi, didn't work for me today after 2 tries. And yes, I set the ARC186 to the correct frequency and I also tried all PT-buttons on my HOTAS. Nothing. Because I still didn't get the 9-line, I decided to destroy the morters. When finished, I got the confirmation from warrior and RTB. And thought, ok at least the triggers work. But when I wanted to report in to Kobulati, I found all my comms were dead. Either via voice call, nor using the menu function. Any clue? Or ED still didn't released your update? DK
some1 Posted January 1, 2024 Posted January 1, 2024 I've just finished this mission and the jtac worked fine. Make sure you talk to him on the FM radio, which is comm switch aft. Trying to contact him on the other two radios (comm switch forward or down) probably won't work. 1 Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
Tblue282 Posted February 16, 2024 Posted February 16, 2024 I tried this morning and also had no jtac response. Used correct radio and freq. then tried flight and overlord just for good measure. Never did get it after many attempts. Going to circle back and try again Sunday.
baltic_dragon Posted February 19, 2024 Posted February 19, 2024 Please keep me posted. With the new radio there is an unusual number of problems, but many of them are mostly user errors (fortunately!) For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Tblue282 Posted February 20, 2024 Posted February 20, 2024 9 hours ago, baltic_dragon said: Please keep me posted. With the new radio there is an unusual number of problems, but many of them are mostly user errors (fortunately!) Got a chance to sit down and try again, unfortunately my wingman got shot down and seemed to break the mission. I’ll try again and keep you posted. I’m confident third times a charm. On 2/16/2024 at 10:12 AM, Tblue282 said: I tried this morning and also had no jtac response. Used correct radio and freq. then tried flight and overlord just for good measure. Never did get it after many attempts. Going to circle back and try again Sunday.
baltic_dragon Posted March 11, 2024 Posted March 11, 2024 I'm afraid not much I can do about the in-game JTAC, the way he works is 100% on DCS and out of my hands... I'll check though. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Recommended Posts