JesterIsDead Posted March 14, 2023 Posted March 14, 2023 I run a Quest 2 with a RTX3060ti and my pixel density is set at 1.1. I am hoping to upgrade to a 3080 at least. Those running 3080s or higher, what are your pixel density? How does this change the appearance or your VR graphics? I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
VR Flight Guy in PJ Pants Posted March 14, 2023 Posted March 14, 2023 RTX-4090, PD is still at 1.0, prefer running at higher resolution instead. I Fly, Therefore I Am. One cannot go around not saying "Thank you" every time these days, can't you? YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA
JesterIsDead Posted March 14, 2023 Author Posted March 14, 2023 52 minutes ago, VR Flight Guy in PJ Pants said: RTX-4090, PD is still at 1.0, prefer running at higher resolution instead. Interesting, do you run at 120Hz? what do you set your MSAA at? Trying to make my MDFs clearer with pixel density. I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
gonvise Posted March 14, 2023 Posted March 14, 2023 Since I have the 4090 I have started using 125% resolution on steamvr or openxr. The quality and clarity in reverb G2 is superb.
VR Flight Guy in PJ Pants Posted March 14, 2023 Posted March 14, 2023 1 hour ago, JesterIsDead said: Interesting, do you run at 120Hz? what do you set your MSAA at? Trying to make my MDFs clearer with pixel density. Shameless push: I Fly, Therefore I Am. One cannot go around not saying "Thank you" every time these days, can't you? YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA
fagulha Posted March 14, 2023 Posted March 14, 2023 (edited) 2 minutes ago, VR Flight Guy in PJ Pants said: Shameless push: Check the Frame Timing for both MT vs Single Thread. Edited March 14, 2023 by fagulha Typo About carrier ops: "The younger pilots are still quite capable of holding their heads forward against the forces. The older ones have been doing this too long and know better; sore necks make for poor sleep.' PC: 14th I7 14700KF 5.6ghz | 64GB RAM DDR5 5200 CL40 XMP | Gigabyte RTX 4080 Super Aero OC 16 GB RAM GDDR6X | Thermalright Notte 360 RGB | PSU Thermaltake Though Power GF A3 Snow 1050W ATX 3.0 / 1 WD SN770 1TB M.2 NVME + 1 SSD M.2 2TB + 2x SSD SATA 500GB + 1 Samsung 990 PRO 4TB M.2 NVME (DCS only) | Valve Index| Andre´s JeatSeat.
JesterIsDead Posted March 14, 2023 Author Posted March 14, 2023 35 minutes ago, VR Flight Guy in PJ Pants said: Shameless push: Your settings are so modest! I run higher settings on my RTX3060ti. Am I way off? I run 90Hz slider all the way to the right, High Texture/High Terrains MSAAx2. PD 1.1. I do use 30HZ ASW. Maybe I should turn my settings down? I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
JesterIsDead Posted March 14, 2023 Author Posted March 14, 2023 1 hour ago, gonvise said: Since I have the 4090 I have started using 125% resolution on steamvr or openxr. The quality and clarity in reverb G2 is superb. I wish I got the G2 instead. Now I get to pick a new GPU or VR Headset, not both. I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
VR Flight Guy in PJ Pants Posted March 14, 2023 Posted March 14, 2023 (edited) 1 hour ago, fagulha said: Check the Frame Timing for both MT vs Single Thread. From the CapFrameX I get later, the MT frame times were much better. 1 hour ago, JesterIsDead said: Your settings are so modest! I run higher settings on my RTX3060ti. Am I way off? I run 90Hz slider all the way to the right, High Texture/High Terrains MSAAx2. PD 1.1. I do use 30HZ ASW. Maybe I should turn my settings down? Because I trade fps over visual quality. The choice is personal. I just shown how much better MT helps with OpenXR. Also, this was an old setting because the whole scenario has no trees, I then changed the setting of some part to even lower so that some more challenging situation like snowy mountain in Caucasus could perform better. Edited March 14, 2023 by VR Flight Guy in PJ Pants I Fly, Therefore I Am. One cannot go around not saying "Thank you" every time these days, can't you? YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA
Laidback Posted March 14, 2023 Posted March 14, 2023 I also have the Q2 with a 3060ti with the pixel density set at 1.5. I'm averaging 40 fps depending on aircraft and map but doesn't drop under 35. Very smooth flight in M.T. with openxr. Graphics at high accept water and shadows. If I set it to 1.7 my fps drops to about 35 but still very smooth and very clear. [sIGPIC][/sIGPIC]
JesterIsDead Posted March 14, 2023 Author Posted March 14, 2023 2 minutes ago, Laidback said: I also have the Q2 with a 3060ti with the pixel density set at 1.5. I'm averaging 40 fps depending on aircraft and map but doesn't drop under 35. Very smooth flight in M.T. with openxr. Graphics at high accept water and shadows. If I set it to 1.7 my fps drops to about 35 but still very smooth and very clear. Do you use OTT or ODT? What are your Oculus settings? I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
Laidback Posted March 14, 2023 Posted March 14, 2023 I use ODT. I have everything disable accept FOV which is set to auto. Adaptive GPU at default. Distortion Curvature at low. Encode Resolution at 3960. Encode Bitrate at 500 and link Sharpening enabled. [sIGPIC][/sIGPIC]
JesterIsDead Posted March 14, 2023 Author Posted March 14, 2023 4 minutes ago, Laidback said: I use ODT. I have everything disable accept FOV which is set to auto. Adaptive GPU at default. Distortion Curvature at low. Encode Resolution at 3960. Encode Bitrate at 500 and link Sharpening enabled. what refresh rate do you run? I am currently on 90HZ but it seems too high. I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
Laidback Posted March 14, 2023 Posted March 14, 2023 22 minutes ago, JesterIsDead said: what refresh rate do you run? I am currently on 90HZ but it seems too high. That's what I have it at too. I may drop it down to 72 to see how it runs but I don't have any issues right now. [sIGPIC][/sIGPIC]
fagulha Posted March 14, 2023 Posted March 14, 2023 (edited) Time framing is often missed. I have more or less the same fps in VR but smoother, my frame times are lower (better). Edited March 14, 2023 by fagulha Typo About carrier ops: "The younger pilots are still quite capable of holding their heads forward against the forces. The older ones have been doing this too long and know better; sore necks make for poor sleep.' PC: 14th I7 14700KF 5.6ghz | 64GB RAM DDR5 5200 CL40 XMP | Gigabyte RTX 4080 Super Aero OC 16 GB RAM GDDR6X | Thermalright Notte 360 RGB | PSU Thermaltake Though Power GF A3 Snow 1050W ATX 3.0 / 1 WD SN770 1TB M.2 NVME + 1 SSD M.2 2TB + 2x SSD SATA 500GB + 1 Samsung 990 PRO 4TB M.2 NVME (DCS only) | Valve Index| Andre´s JeatSeat.
Hippo Posted March 16, 2023 Posted March 16, 2023 (edited) I very recently upgraded from a 1080ti to a 3080ti. I am still tuning, but currently I am running with these settings. My aim is to run at 72 fps w/o ASW kicking in on moderately simple SP missions (was not possible with 1080ti). I would like to run at 1.3 - 1.5 PD, but I find that I can't hold 72 fps, as I'd like, if I do, so am running at 1.1. I think it appers considerably crisper, esp for small text, in MFDs, etc, and would love to run it this high, but it impacts my performance too much. I am still running with my i7-8700k, and will be upgrading this to something newer soon (prob 13700k), which I hope will squeeze out a bit more performance. I havent tried going higher that 72 Hz, which again would be nice, by will of course impact performance. I'm actually very happy with the upgrade, as I highly value being able to run w/o ASW. Edited March 16, 2023 by Hippo System spec: Intel i7 12700k @ stock, ASUS TUF Gaming GeForce RTX 3080 Ti 12GB GDDR6X, Gigabyte Z690 UD DDR4, Corsair Vengeance LPX 32GB (2 x 16GB) DDR4 3200MHz C16, Samsung 980 EVO 500 GB NVME M.2 SSD (system drive), WD Black SN 850X 2TB NVME M.2 SSD (games drive), Thermalright Assassin Spirit 120 Evo Cooler, Asus XG43UQ Monitor, Oculus Quest Pro, Thrustmaster Warthog HOTAS Prev System spec (leaving here because I often reference it in my posts): Intel i9 13900KF @ stock, Gigabyte GeForce RTX 4090 Gaming OC 24GB GDDR6X, Gigabyte Z690 UD DDR4, Corsair Vengeance RGB PRO SL 32GB (2 x 16GB) DDR4 3600MHz C18, Samsung 980 EVO 500 GB NVME M.2 SSD (system drive), Samsung 970 EVO 1 TB NVME M.2 SSD (games drive), Cooler Master ML360 Illusion CPU Cooler, Asus XG43UQ Monitor, Oculus Quest Pro, Thrustmaster Warthog HOTAS, MFG Crosswind Rudder Pedals
JesterIsDead Posted March 16, 2023 Author Posted March 16, 2023 1 hour ago, Hippo said: I very recently upgraded from a 1080ti to a 3080ti. I am still tuning, but currently I am running with these settings. My aim is to run at 72 fps w/o ASW kicking in on moderately simple SP missions (was not possible with 1080ti). I would like to run at 1.3 - 1.5 PD, but I find that I can't hold 72 fps, as I'd like, if I do, so am running at 1.1. I think it appers considerably crisper, esp for small text, in MFDs, etc, and would love to run it this high, but it impacts my performance too much. I am still running with my i7-8700k, and will be upgrading this to something newer soon (prob 13700k), which I hope will squeeze out a bit more performance. I havent tried going higher that 72 Hz, which again would be nice, by will of course impact performance. I'm actually very happy with the upgrade, as I highly value being able to run w/o ASW. I tried bumping my DCS to 1.5 PD. It looked so gorgeous, but of course not playable. Even with a 3080ti, it's not possible? My goal is to run w/o ASW as well. I am running at 90hz with 30hz ASW in OTT and it runs smooth even for a moderately busy mission. I do notice bandits get blurry when they fly by close to me. My frame is still 30 fps, but it seems like ASW is kicking in. Running without ASW is important to me as well. I7-10700F | RTX4070 FE | 32G RAM | Quest 2/3 | TM T16000 HOTAS & Throttle | F/A-18C | F-14A/B | F-15C | A-10 II | F-4E
teewhite7 Posted December 5, 2024 Posted December 5, 2024 On 3/14/2023 at 2:35 PM, gonvise said: Since I have the 4090 I have started using 125% resolution on steamvr or openxr. The quality and clarity in reverb G2 is superb. You use steamvr or openxr? I thought the only thing to run the g2 was windows mixed reality. Tell me more, please lol cuz I hate wmr Intel i9-10900K 3.7GHz RTX 2080 Super Windforce OC G. Skill Trident Z DDR4 3600MHz (128GB) Samsung 970 Evo Plus NVMe M.2 (2TB) HP Reverb G2,WINWING Super Taurus, Super libra, PTO & PCR panels
Phantom711 Posted December 5, 2024 Posted December 5, 2024 (edited) vor 2 Stunden schrieb teewhite7: I thought the only thing to run the g2 was windows mixed reality. It is. But before OpenXR was a thing with DCS you had to use WMR AND(!) steamVR. And that was nothing to be jealous of… Edited December 5, 2024 by Phantom711 vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord.
Recommended Posts