Phantom_Mark Posted July 25, 2023 Share Posted July 25, 2023 (edited) So I ran exactly the same mission last night, so have been able to compare back to back. Scanning an SA2 site and then selecting the tracking radar, then engage..............George either missed completely several times, mostly with missile and terrain collisions or when he finally did shoot something he shot the wrong target, not the one I had selected, he did that multiple times. 1: General accuracy seems worse than last Beta version ( I was using the K model ) 2: George doesn't engage the target you selected when there is a group I can't imagine this is my imagination as it is the polar opposite of my experience in the previous version, which almost made me wonder if they were too accurate ? Edited July 26, 2023 by Phantom_Mark Link to comment Share on other sites More sharing options...
Floyd1212 Posted July 25, 2023 Share Posted July 25, 2023 When you select a unit from the target list, he doesn't lase that unit and lases a different one instead? Ir you are saying he lases one unit and a 114K missile strikes a different target than the one he is lasing? When he lases, is he engaging IAT? I have seen situations where he locks onto the very tip of a vehicle which may result in an overshoot of the missile to the terrain beyond. Also, missile and terrain collisions are not George's fault. You will need to maneuver the aircraft so he has a clean shot. He has no control over how the missile reaches the target. Do you have a track file? Link to comment Share on other sites More sharing options...
ED Team Lord Vader Posted July 25, 2023 ED Team Share Posted July 25, 2023 Hi @Phantom_Mark @Floyd1212referred to several good tips to avoid misses and wrong targets being shot: a stabilized aircraft, confirming the laser code is correct and guarantee a good position and LOS, avoiding obstacles around the aircraft and target area. There are several intentional limitations that can cause misses, such as terrain masking, target movement, George sight being momentarily lost and some other factors. This is an attempt to make it realistic and in our internal tests, this is working as intended with the AGM-114K. The best way to see what George sees, is to call the Video/TADS page and observe his behaviour. Then you can make a decision to fire immediately or maneuver to get a better shot. If you feel this is a bug, however, a track file is necessary to understand what went wrong on your side. 2 Esquadra 701 - DCS Portugal - Discord Link to comment Share on other sites More sharing options...
Phantom_Mark Posted July 25, 2023 Author Share Posted July 25, 2023 So in both instances we are saying nothing has changed ? ok not a problem......I will make a track, just seems strange how I very rarely missed a thing previously and always shot the target I selected previously that's all. Hopefully the track will show what is going on so I can better understand that sudden change in perceived behaviour. Link to comment Share on other sites More sharing options...
ED Team Lord Vader Posted July 25, 2023 ED Team Share Posted July 25, 2023 You can verify what changed by reading the changelog with every update we release. Esquadra 701 - DCS Portugal - Discord Link to comment Share on other sites More sharing options...
Phantom_Mark Posted July 25, 2023 Author Share Posted July 25, 2023 (edited) I read the change log before I even fired up the game, of course Edited July 25, 2023 by Phantom_Mark 1 Link to comment Share on other sites More sharing options...
Phantom_Mark Posted July 26, 2023 Author Share Posted July 26, 2023 (edited) Well I flew this again tonight, with the view to creating the track, rather than fly the whole mission again I came in from a different direction and distance, seemingly no problems, having successfully completed that mission from the direction mentioned above I felt secure it should be possible with few problems, seems however it was maybe just the perfect storm of events to create bad results, no such issues tonight. Maybe the updates to the collision with terrain hit harder than expected, I was aware of those updates, but it never seemed a factor previously. Edited July 26, 2023 by Phantom_Mark Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted July 26, 2023 ED Team Share Posted July 26, 2023 Hi, if you see the issue please add a track replay, it is the only way for us to try and diagnose an issue. In our tests all seems ok. thank you Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
Phantom_Mark Posted July 26, 2023 Author Share Posted July 26, 2023 5 hours ago, BIGNEWY said: Hi, if you see the issue please add a track replay, it is the only way for us to try and diagnose an issue. In our tests all seems ok. thank you Yup no worries Link to comment Share on other sites More sharing options...
Phantom_Mark Posted July 27, 2023 Author Share Posted July 27, 2023 Loving this chopper more and more.. ah64.trk Link to comment Share on other sites More sharing options...
Dragzor Posted September 20, 2023 Share Posted September 20, 2023 I'm having the same issues with george cp/g. When theres a group of enemies, often, not always, ai changes targets when engaging, using short right command. Link to comment Share on other sites More sharing options...
ED Team Lord Vader Posted September 21, 2023 ED Team Share Posted September 21, 2023 Hi @Dragzor Like mentioned above, we need a track to visualize what you are stating. We don't really see this behaviour on our side. Esquadra 701 - DCS Portugal - Discord Link to comment Share on other sites More sharing options...
Dragzor Posted September 21, 2023 Share Posted September 21, 2023 Thanks for reply So far I can't upload track file here. Maybe because I just made an account. For visualization I made short vid, which is made from track replay. https://youtu.be/aNePrTSnqp4?si=zGyXyO4oso8XaUXV You can see there, CP/G moving TADS to another target the moment I "tell" George to track/engage target. Not always tho. Link to comment Share on other sites More sharing options...
Dragzor Posted September 21, 2023 Share Posted September 21, 2023 Track showing that CP/G George issue. georgecpgb.miz.trk Link to comment Share on other sites More sharing options...
Floyd1212 Posted September 21, 2023 Share Posted September 21, 2023 I replayed your track and saw the same thing you showed in the video, but when I took control and told George to lase different targets, the problem wasn't there for me. Could you have a faulty hat on your HOTAS that is triggering both up and right at the same time? What if you map the George controls to keyboard presses and see if it does the same thing? Maybe a slow repair? Link to comment Share on other sites More sharing options...
Dragzor Posted September 21, 2023 Share Posted September 21, 2023 @Floyd1212 Thanks, You pinpointed issue, and were right about it. It's on my side. Hat is fine I think, tho its 8way. I'll switch to 4way to get better clarity I hope, and will add extra button for same function. Sorry for taking Your time and take care. Link to comment Share on other sites More sharing options...
ED Team Lord Vader Posted September 22, 2023 ED Team Share Posted September 22, 2023 Awesome work, @Floyd1212beat me to it. If there's anything you need further, @Dragzor, let us know. Esquadra 701 - DCS Portugal - Discord Link to comment Share on other sites More sharing options...
DevArchitect Posted October 14, 2023 Share Posted October 14, 2023 (edited) Just ran a SP mission with Limas and Kilos. Some of the Limas hit OK - my last handful did not hit the target. Stationary aircraft with human CP/G and George pilot. Limas_missing.trk Edited October 14, 2023 by DevArchitect Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now