dburne Posted October 23, 2023 Share Posted October 23, 2023 (edited) In the above mission, for a little while there has been an issue I used to never have. I use this mission to keep fresh in Hornet Cold Start, and what I would do is go through all the cold start and then when done I would taxi to the catapult take off and fly around for a bit before returning to carrier. Now the chief will not remove the wheel chocks for me. He confirms and says he did but they never get removed and I can not proceed any further after the cold start. I just go to the takeoff from catapult mission to continue but would very much like for it to return the way it was. I miss taxing to the catapult which I enjoy. I have tried a full slow repair of DCS World and that did not work. I am not sure if this has been reported, or if for whatever crazy reason it is only happening to me. I realize this is a minor thing and maybe not get addressed but I would sure love it if it got fixed to the way it was. And again has been several weeks so not just relegated to 2.9. Thanks for any help here, Edited October 23, 2023 by dburne Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted October 24, 2023 ED Team Share Posted October 24, 2023 Hi, I have tested and all seems ok for me. Can you attach a short track replay example. thank you Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
dawgie79 Posted October 25, 2023 Share Posted October 25, 2023 Not to hijack this thread, but do you mean something like this, @dburne? It''s the same mission as you only edited a bit. Chief told me too chocks were removed, until I changed view and saw they were still there, in flight. Link to comment Share on other sites More sharing options...
dburne Posted October 25, 2023 Author Share Posted October 25, 2023 Yeah mine do not let me leave the parking spot. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Solution dburne Posted October 25, 2023 Author Solution Share Posted October 25, 2023 (edited) Seems I have found my issue, and it is not DCS related. My Crosswinds are going bad. I checked in the MFG software, and they are not even recognized now. Got them in 2015. I have a good suspicion it is in the cable. I will have a new cable from Amazon sometime tomorrow so will find out for sure then. I am hoping it is just the cable. If it is not the cable reckon I will take a look at the TM top end pedals. Sorry for the false alarm. Edited October 25, 2023 by dburne Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Recommended Posts