cannot repoduce and missing track file Litening pod FOV control using RAID/FOV button

[WurzelGummage]

Reading Chucks Guide I was left with the impression that with the Litening Pod, that the RAID/FOV button on the HOTAS changed between wide and narrow FOV on a short press and CCD/FLIR on a long press, but I can't seem to make it do that. I have the screen with the pod display selected, the radar elevation does the zoom like it should, but RAID/FOV does nothing.

Anyone experienced the same or know what if anything I'm doing wrong?

Thanks

[AstonMartinDBS]

Check your bindings for the RAID/FOV/FLIR button and make sure that the DDI displaying the FLIR has SCS priority, which is indicated by the little diamond in the upper right of the DDI.

I've tested it right now - changing FLIR FOV and switching CCD/IR works as described.

[WurzelGummage]

Yeah, all set up correctly, I'll play about with it some more later. 

 

[AstonMartinDBS]

Try to reproduce your issue and upload a short track of your try, so we can take a closer look.

[Trigati]

Do you have mavericks loaded? I think when you do it doesn’t work


Sent from my iPhone using Tapatalk

[WurzelGummage]

That might be it then. I did have Mavs on. 

[rob10]

To expand on the answer above: when you have a MAV SELECTED (IR or LASER) in STORES, it takes complete priority of the RAID/FOV button.  Doesn't matter if the MAV is up on a DDI or if a MAV is up on DDI but doesn't have priority, the RAID/FOV button will work on the MAV (which really only does anything for the IR MAV since you can't change FOV/sensor type on LASER MAV's , but behaviour is the same for both).  You CAN have them loaded and still use the RAID/FOV button to change FOV/IR/CCD on the pod as long as no MAV is selected in the STORES page.

[WurzelGummage]

8 minutes ago, rob10 said:

To expand on the answer above: when you have a MAV SELECTED (IR or LASER) in STORES, it takes complete priority of the RAID/FOV button.  Doesn't matter if the MAV is up on a DDI or if a MAV is up on DDI but doesn't have priority, the RAID/FOV button will work on the MAV (which really only does anything for the IR MAV since you can't change FOV/sensor type on LASER MAV's , but behaviour is the same for both).  You CAN have them loaded and still use the RAID/FOV button to change FOV/IR/CCD on the pod as long as no MAV is selected in the STORES page.

This is exactly the answer I was after, thanks. 

[Tholozor]

In addition, the same is also true for HARMs.

[rob10]

11 hours ago, Tholozor said:

In addition, the same is also true for HARMs.

Thanks for that.  I hadn't realized that one.