Jump to content

Recommended Posts

  • ED Team
Posted

Hi, 

just tested with my pimax and all looks ok to me. Can you run a repair of DCS and if you still have the problem attach a short track replay example 

thank you 

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal

Posted

It is normal if you roll/tilt your head as IHADDS imagery does not compensate for this tilting of the head (this is also the same for the night vision overlay).

Only up/down or turning your head left/right is compensated for... I believe.

HP G2 Reverb (Needs upgrading), Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. set to OpenXR, but Open XR tool kit disabled.

DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), DLSS setting is quality at 1.0. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC... Everything needs upgrading in this system!.

Vaicom user and what a superb freebie it is! Virpil Mongoose T50M3 base & Mongoose CM2 Grip (not set for dead stick), Virpil TCS collective with counterbalance kit (woof woof). Virpil Apache Grip (OMG). MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound... goodbye VRS.

Posted
12 minutes ago, Rogue Trooper said:

It is normal if you roll/tilt your head as IHADDS imagery does not compensate for this tilting of the head (this is also the same for the night vision overlay).

Only up/down or turning your head left/right is compensated for... I believe.

This is my issue, but why shouldn't it compensate,as it is compensating for other obejcts like waypoints or ACQ point. ? Here is a track : https://www.mediafire.com/file/imy4ougm1psrr5k/Cscope.trk/file

Done with full repaired game, same issue.

Intel i5 10400K @4.8 GHz, 3080ti, 32 GB RAM, Varjo Areo.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

  • ED Team
Posted
24 minutes ago, lefuneste01 said:

This is my issue, but why shouldn't it compensate,as it is compensating for other obejcts like waypoints or ACQ point. ? Here is a track : https://www.mediafire.com/file/imy4ougm1psrr5k/Cscope.trk/file

Done with full repaired game, same issue.

thank you for the track. 

This is intended behaviour, Cscope is only stabilised in the horizontal plane, if you tilt or roll your head right they will look out of alignment. 

thank you 

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal

  • BIGNEWY changed the title to C-scope bug again ? Alignment when rolling or tilting head.
Posted (edited)
2 hours ago, BIGNEWY said:

thank you for the track. 

This is intended behaviour, Cscope is only stabilised in the horizontal plane, if you tilt or roll your head right or lift they it will look out of alignment. 

thank you 

Thanks fir the quick answer, I was not sure of what we could expect. In fact I never noticed it was the same for all objects ! On the same context : is it normal the zoom is not working with RMAP mode ?

Edited by lefuneste01

Intel i5 10400K @4.8 GHz, 3080ti, 32 GB RAM, Varjo Areo.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...