MAIN CAMPAIGN Critical errors in caution panel and poor maneuverability

[borja.abadc]

Hi

In all missions of the MAIN CAMPAIGN there are critical errors displayed in the caution panel: DOM and USEL and BECS among others.

Same procedure I follow does not display any error in free flight mode.

note: Before FBW test I already move the controls. Therefore is not this problem...

In addition during take off maneuver the M2K is uncontrollable.

It's clear a bug situation.

Other people with same problem?

cheers

[gabuzomeu]

Did you check the VRILLE switch ( yellow/black stripes, left of the ball) is on norm and make sure you do not touch it during start up as once moved the fbw is corrupted definitively, with the symptoms you describe?

There might be a different set up in campaign vs free flight…

Edited September 23, 2024 by gabuzomeu
Locate switch

[Akiazusa]

Might because of the cold weather in the CAMPAIGN mission,try turning on the pitot heat,giving it sometime to warm up,finally resetting the FBW by the reset switch,it should fix the problem. (If you set up a cold weather in the free flight mode,you will most likely end up in the same situation.)

 

Also check whether your dcs world is up-to-date,there was a bug in the previous version of the mirage causing problem during crosswind take off,but it should be fixed already.

Edited September 24, 2024 by Akiazusa

[borja.abadc]

Thank you very much.

It's really strange because I played the campaign a few years ago and never had this kind of error.

I will try your advices

[=36=Witcher]

You also have to run the FBW test before taking off. If you played it years ago you should catch up with the latest updates.

[borja.abadc]

Hi again,

Already tested and the problem was the FBW reset switch. It is necessary to push after or before FBW test. Really strange because thre is no same problem in free fligh mode.

Thanks for all the comments.

Good flights