RealDCSpilot Posted February 2 Posted February 2 1. use NVcleanstall and only install Nvidia driver, HD audio and PhysX https://www.techpowerup.com/download/techpowerup-nvcleanstall/ 2. get Nvidia Profile Inspector https://github.com/Orbmu2k/nvidiaProfileInspector/releases 3. do this (and check and maybe revert former settings for the Digital Combat Simulator Black Shark profile) 5 2 i9 13900K @5.5GHz, Z790 Gigabyte Aorus Master, RTX4090 Waterforce, 64 GB DDR5 @5600, PSVR2, Pico 4 Ultra, HOTAS & Rudder: all Virpil with Rhino FFB base made by VPforce, DCS: all modules
VR Flight Guy in PJ Pants Posted February 2 Posted February 2 Follow and like I Fly, Therefore I Am. One cannot go around not saying "Thank you" every time these days, can't you? YouTube: https://www.youtube.com/channel/UCc9BDi-STaqgWsjNiHbW0fA
Notarobot Posted February 2 Posted February 2 (edited) Doesn't work.. the override DLSS SR option is not even in nvidia inspector wait nevermind still tinkering Edited February 2 by Notarobot
RealDCSpilot Posted February 2 Author Posted February 2 NVcleanstall shows an option during installation "Enable DLSS Indicator". 1 i9 13900K @5.5GHz, Z790 Gigabyte Aorus Master, RTX4090 Waterforce, 64 GB DDR5 @5600, PSVR2, Pico 4 Ultra, HOTAS & Rudder: all Virpil with Rhino FFB base made by VPforce, DCS: all modules
Notarobot Posted February 2 Posted February 2 Kind of **** that i can't use the nvidia app now though i need it for other games
Notarobot Posted February 2 Posted February 2 (edited) 2 hours ago, RealDCSpilot said: NVcleanstall shows an option during installation "Enable DLSS Indicator". So got it working looks like. Now, i can't seem to DISABLE the overlay? Ok it's done in reg edit : [HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NGXCore] "ShowDlssIndicator"=dword:00000000 Edited February 2 by Notarobot 1
okopanja Posted February 5 Posted February 5 On 2/2/2025 at 3:28 PM, Notarobot said: So got it working looks like. Now, i can't seem to DISABLE the overlay? Ok it's done in reg edit : [HKEY_LOCAL_MACHINE\SOFTWARE\NVIDIA Corporation\Global\NGXCore] "ShowDlssIndicator"=dword:00000000 I would just rename it and leave the value 400 there. No need to remember anything. BTW: really works for me as well. Condition: green
jhonsip Posted July 30 Posted July 30 (edited) Thanks! That’s a solid setup. I’ll use NVCleaninstall to keep the install clean, and will check the DCS profile in NVIDIA Profile Inspector as suggested. Appreciate the tip! Edited August 1 by jhonsip
sleighzy Posted July 30 Posted July 30 3 hours ago, jhonsip said: Thanks! That’s a solid setup. I’ll use NVCleanstall to keep the install clean, and will check the DCS profile in NVIDIA Profile Inspector as suggested. Appreciate the tip! Old news. DCS natively supports this now. Add the below line to your C:\Users\username\Saved Games\DCS\Config\autoexec.cfg file to set the DLSS preset, this is still C by default. You will need to create this file if it does not already exist. DLSS_Preset = 'K' You can add this line as well if you don’t want DLSS applied to MFDs and HUD to keep them sharp with no ghosting for greater control. HUD_MFD_after_DLSS = true 3 AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2
jhonsip Posted July 31 Posted July 31 7 hours ago, sleighzy said: Old news. DCS natively supports this now. Add the below line to your C:\Users\username\Saved Games\DCS\Config\autoexec.cfg file to set the DLSS preset, this is still C by default. You will need to create this file if it does not already exist. DLSS_Preset = 'K' You can add this line as well if you don’t want DLSS applied to MFDs and HUD to keep them sharp with no ghosting for greater control. HUD_MFD_after_DLSS = true That's great, Thanks once again
Hiob Posted yesterday at 01:33 PM Posted yesterday at 01:33 PM Quick question: I tried DLSS Swapper today and changing the DLSS runtime for DCS was suspiciously easy. Is there a way to verify it is actually working and using the correct runtime? "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?"
firefox121 Posted yesterday at 08:54 PM Posted yesterday at 08:54 PM hace 7 horas, Hiob dijo: Quick question: I tried DLSS Swapper today and changing the DLSS runtime for DCS was suspiciously easy. Is there a way to verify it is actually working and using the correct runtime? Just enable the dlls overlay at dlss swapper options and you will see the version thait is running in this moment, with the preset and the scale 1 1 Intel i9 10850k - MSI Tomahawk 490z - 64 GB DDR4 3000 - HP Reverb G2 - MSI optix Mag321curv 4k monitor - MSI RTX 3080ti - Winwing Orion Throttle base plus F18 stick
Hiob Posted 23 hours ago Posted 23 hours ago 45 minutes ago, firefox121 said: Just enable the dlls overlay at dlss swapper options and you will see the version thait is running in this moment, with the preset and the scale Thank you. . That was kinda obvious, now I feel stupid…. But nevertheless it worked. Piece of cake actually. 1 1 "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?"
sleighzy Posted 21 hours ago Posted 21 hours ago 9 hours ago, Hiob said: Quick question: I tried DLSS Swapper today and changing the DLSS runtime for DCS was suspiciously easy. Is there a way to verify it is actually working and using the correct runtime? DCS now has native support for setting the preset. You can also look in your DCS log file as it will output the preset being used. 2 AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2
Hiob Posted 21 hours ago Posted 21 hours ago 1 minute ago, sleighzy said: DCS now has native support for setting the preset. You can also look in your DCS log file as it will output the preset being used. Thank you, I just wanted a quick verification that the DLSS swapper worked (which it did) and the Nvidia Driver didn’t overwrite it somehow. (Which it didn’t). I guess there are several paths to success. 2 "Muß ich denn jedes Mal, wenn ich sauge oder saugblase den Schlauchstecker in die Schlauchnut schieben?"
Recommended Posts